MIDWEST INDUSTRIES | RUGER 10/22 | PICATINNY | MI-1022SM
A Solid Starting Point for Your 10/22 Optics.
The Midwest Industries MI-1022SM adds a clean Picatinny mounting rail to the top of a Ruger 10/22 receiver using the existing factory scope-base holes. Machined from 6061 aluminum with a matte black hardcoat-anodized finish, it gives you a straightforward foundation for the scope rings or compatible red-dot mount you actually want.
A 10/22 is easy to make your own, but the optic mount should not be complicated. This one-piece Midwest Industries rail uses the factory receiver mounting-hole pattern rather than requiring new holes in a compatible receiver. At 4.650 inches long and approximately 1.6 ounces including screws, it keeps the receiver setup simple while adding a standard Picatinny attachment surface.
The important fitment distinction is where the rail goes. This is a receiver-mounted rail for Ruger 10/22 receivers and compatible clones, not a barrel-mounted rail and not a dovetail adapter. That makes it a natural option for a standard 10/22 scope or red-dot setup, but Takedown, Charger and modified receiver configurations should be checked for the correct hole pattern and clearance rather than assumed to fit every variation.
Midwest Industries gives this model a matte black finish and backs it with a lifetime warranty. The manufacturer does not publish a numerical MOA incline for the MI-1022SM, so we do not label it a 0 MOA or 25 MOA rail without support. If a specific incline is part of your optic setup, we also carry a DIP 25 MOA Ruger 10/22 scope base. Find other platform-specific upgrades through our Ruger 10/22 parts and upgrades hub.
Pair It With
A rail is only one part of an optic setup. Choose rings for the scope tube diameter and clearance, or a red dot with its own compatible Picatinny clamp. The Warne 1-inch and 30mm rings below are alternatives, not a matched pair to purchase together. Our 10/22 buffers are a separate, optional action upgrade.
Maxima QD 1-inch Rings1-inch medium-height rings; match scope tube and clearance.
Maxima QD 30mm Rings30mm medium-height rings for a suitably sized scope.
10/22 Viton Bolt BuffersA separate, compact 10/22 action-maintenance upgrade.Choose the Optic That Fits Your Shooting
A compact red dot keeps the setup quick and uncomplicated, while a magnified scope is useful when you want a closer look at small targets or to work at longer rimfire distances. The Athlon Neos BDC 22 model is a particularly relevant option for the 10/22. Check each optic’s mounting system: a conventional riflescope needs properly sized rings, while some red dots include a Picatinny interface and others need an adapter.
Sighting Options
Scopes & Red Dots for the 10/22
Rimfire-focused magnification and compact red-dot options. Confirm tube diameter, mounting hardware and sight height before choosing.
Athlon OpticsNeos 4-12x40 BDC 22Rimfire-focused magnified scope with a 1-inch tube.View Product →
Athlon OpticsMidas TSR2 Red DotCompact red-dot optic; verify the included mount setup.View Product →
Athlon OpticsNeos 4-12x40 BDC 500 IRAnother 1-inch magnified optic option; rings separate.View Product →
Athlon OpticsMidas TSR1 Open Red DotOpen-style sight with a listed Picatinny mounting interface.View Product →Prefer Another 10/22 Scope Base?
Optic mounting starts with the shooting distance, sight height and whether you intend to retain a factory sight line. These two DIP rails address different needs and are alternatives to the Midwest Industries rail, not pieces to stack on top of it.
Building Out the Rest of Your Ruger 10/22?
Once the sighting system is settled, the next meaningful decisions are the stock, trigger, barrel and bolt. We carry Ruger 10/22 choices from Victor Company, MDT, Timney, Volquartsen and Shaw. These are separate upgrades; the scope rail does not require any of them. Match fixed-barrel versus Takedown configurations carefully and verify aftermarket receiver, stock and trigger clearance before mixing components.
Major 10/22 Upgrades
Finish Your Ruger 10/22 Build
Explore complete stocks, trigger assemblies, barrels and bolts. Every option is a separate purchase requiring its own fitment check.
Victor CompanyTITAN22 Stock BlackPrecision-oriented stock for standard fixed-barrel 10/22 builds.View Product →
MDT10/22 Field Stock FDEFlat Dark Earth stock option for a purpose-built 10/22 setup.View Product →
VolquartsenTG2000 Trigger AssemblyComplete trigger-group alternative for 10/22 rifles.View Product →
Timney10/22 Two-Stage TriggerTimney complete two-stage trigger assembly in black.View Product →
Shaw18-inch Stainless BarrelFixed-barrel Ruger 10/22 upgrade; check stock barrel channel.View Product →
VolquartsenCompetition Bolt BlackComplete bolt assembly option for 10/22 builds.View Product →Did You Know? Pete’s Pillars Sells More Than Pillars.
Find quality parts for rimfire builds, from optics and mounting hardware to major stock, barrel and trigger upgrades.
Key Specifications
Brand: Midwest Industries
Manufacturer Part Number: MI-1022SM
Pete’s Pillars Listing SKU: MI-1022SM-BLK
UPC: 816537011224
Product Type: One-piece receiver-mounted Picatinny scope rail
Compatibility: Ruger 10/22 receivers and compatible clones using the factory scope-mount hole pattern
Attachment: Factory receiver mounting holes
Material: 6061 aluminum
Finish: Hardcoat anodized, matte black
Overall Length: 4.650 inches
Weight: Approximately 1.6 oz with screws
Included: Scope rail and mounting screws; optics and scope rings sold separately
MOA Cant: Not numerically specified by the manufacturer
Warranty: Midwest Industries lifetime warranty, per manufacturer terms
Midwest Industries MI-1022SM Frequently Asked Questions
What rifles does the Midwest Industries MI-1022SM scope rail fit?
Midwest Industries specifies this rail for Ruger 10/22 receivers and compatible 10/22-pattern clones that use the factory optic-base mounting-hole pattern. Check the exact receiver and any aftermarket modifications before purchase.
Will this rail fit a Ruger 10/22 Takedown or 10/22 Charger?
The rail mounts to the receiver, and Midwest Industries describes compatibility in terms of 10/22 receivers and clones. The maker does not separately specify every Takedown and Charger configuration on its product page, so confirm your receiver hole pattern, stock or handguard clearance, and optic arrangement before ordering.
Does the MI-1022SM attach to the receiver or the barrel?
It attaches to the top of the receiver using the factory mounting holes. It does not attach to the barrel, and it does not convert a 10/22 Takedown into a barrel-mounted optics system.
Is the rail Picatinny or Weaver?
The MI-1022SM is a Picatinny rail. Select optic mounts or scope rings specified to clamp securely to a Picatinny base. Some Weaver-style accessories also fit Picatinny rails, but do not assume every cross-slot or clamp is interchangeable.
Are mounting screws included?
Yes. Product documentation and listings for the Midwest Industries 10/22 scope base identify mounting hardware as included. The 1.6 oz published weight includes screws. The scope, scope rings, and red-dot sight are separate purchases.
Will I need to drill or modify my Ruger 10/22 receiver?
The rail is designed to use the existing factory scope-mount holes on a compatible receiver, so drilling new holes is not part of its intended installation. Verify the actual receiver before proceeding, and follow Midwest Industries mounting instructions.
What is the Midwest Industries 10/22 rail made from?
It is made from 6061 aluminum with a matte black hardcoat-anodized finish. Its published overall length is 4.650 inches, and it weighs approximately 1.6 ounces with screws.
Does the MI-1022SM have 0 MOA or 25 MOA cant?
Midwest Industries does not specify a numerical MOA cant in the published MI-1022SM product details, so this listing does not assign an unverified 0 MOA value. For a scope base explicitly labeled 25 MOA, see the DIP RUG-11025B 25 MOA rail.
Can I still use the factory iron sights with this mount?
Do not assume so. Midwest Industries does not publish a specific iron-sight sightline or co-witness clearance claim for this model. The DIP RUG-11022B rail is separately advertised with a center channel for viewing factory sights, but actual sight clearance should still be checked.
Can I mount a red dot directly to this rail?
A red dot with a compatible Picatinny clamp or adapter can be fitted to the rail. Some open-emitter sights use a proprietary footprint and need a separate Picatinny adapter. Check the chosen optic’s mounting interface; the MI-1022SM is not an optic or a footprint converter by itself.
Which scope rings should I choose for a 10/22 Picatinny rail?
Match the rings to the scope tube diameter (for example, 1 inch or 30mm), Picatinny compatibility, objective-bell and receiver clearance, and a comfortable eye position. We stock Warne 1-inch Maxima QD rings and Warne 30mm Maxima QD rings; these are alternatives for different tube sizes, not two sets needed together.
Is this rail compatible with aftermarket 10/22 receivers?
Midwest Industries states compatibility with 10/22 receivers and clones, but clone receivers may vary in mounting-hole dimensions, upper receiver contours, or hole spacing. Verify the specific manufacturer’s scope-base pattern instead of relying only on the words 10/22 compatible.
Does the mount include a scope, rings, or red dot?
No. The item for sale is the Midwest Industries Picatinny scope rail with the appropriate mounting hardware. Any optic, rings, adapters, stock, barrel, or trigger shown elsewhere on the page is sold separately.
What warranty covers this scope mount?
Midwest Industries advertises a lifetime warranty for this scope mount, subject to the manufacturer’s current terms and coverage decisions. Pete’s Pillars is an authorized Midwest Industries dealer.
Small Change. Big Impact. Pete’s Pillars.
MIDWEST INDUSTRIES | RUGER 10/22 | PICATINNY | MI-1022SM
A Solid Starting Point for Your 10/22 Optics.
The Midwest Industries MI-1022SM adds a clean Picatinny mounting rail to the top of a Ruger 10/22 receiver using the existing factory scope-base holes. Machined from 6061 aluminum with a matte black hardcoat-anodized finish, it gives you a straightforward foundation for the scope rings or compatible red-dot mount you actually want.
A 10/22 is easy to make your own, but the optic mount should not be complicated. This one-piece Midwest Industries rail uses the factory receiver mounting-hole pattern rather than requiring new holes in a compatible receiver. At 4.650 inches long and approximately 1.6 ounces including screws, it keeps the receiver setup simple while adding a standard Picatinny attachment surface.
The important fitment distinction is where the rail goes. This is a receiver-mounted rail for Ruger 10/22 receivers and compatible clones, not a barrel-mounted rail and not a dovetail adapter. That makes it a natural option for a standard 10/22 scope or red-dot setup, but Takedown, Charger and modified receiver configurations should be checked for the correct hole pattern and clearance rather than assumed to fit every variation.
Midwest Industries gives this model a matte black finish and backs it with a lifetime warranty. The manufacturer does not publish a numerical MOA incline for the MI-1022SM, so we do not label it a 0 MOA or 25 MOA rail without support. If a specific incline is part of your optic setup, we also carry a DIP 25 MOA Ruger 10/22 scope base. Find other platform-specific upgrades through our Ruger 10/22 parts and upgrades hub.
Pair It With
A rail is only one part of an optic setup. Choose rings for the scope tube diameter and clearance, or a red dot with its own compatible Picatinny clamp. The Warne 1-inch and 30mm rings below are alternatives, not a matched pair to purchase together. Our 10/22 buffers are a separate, optional action upgrade.
Maxima QD 1-inch Rings1-inch medium-height rings; match scope tube and clearance.Maxima QD 30mm Rings30mm medium-height rings for a suitably sized scope.10/22 Viton Bolt BuffersA separate, compact 10/22 action-maintenance upgrade.Choose the Optic That Fits Your Shooting
A compact red dot keeps the setup quick and uncomplicated, while a magnified scope is useful when you want a closer look at small targets or to work at longer rimfire distances. The Athlon Neos BDC 22 model is a particularly relevant option for the 10/22. Check each optic’s mounting system: a conventional riflescope needs properly sized rings, while some red dots include a Picatinny interface and others need an adapter.
Sighting Options
Scopes & Red Dots for the 10/22
Rimfire-focused magnification and compact red-dot options. Confirm tube diameter, mounting hardware and sight height before choosing.
Athlon OpticsNeos 4-12x40 BDC 22Rimfire-focused magnified scope with a 1-inch tube.View Product →Athlon OpticsMidas TSR2 Red DotCompact red-dot optic; verify the included mount setup.View Product →Athlon OpticsNeos 4-12x40 BDC 500 IRAnother 1-inch magnified optic option; rings separate.View Product →Athlon OpticsMidas TSR1 Open Red DotOpen-style sight with a listed Picatinny mounting interface.View Product →Prefer Another 10/22 Scope Base?
Optic mounting starts with the shooting distance, sight height and whether you intend to retain a factory sight line. These two DIP rails address different needs and are alternatives to the Midwest Industries rail, not pieces to stack on top of it.
Building Out the Rest of Your Ruger 10/22?
Once the sighting system is settled, the next meaningful decisions are the stock, trigger, barrel and bolt. We carry Ruger 10/22 choices from Victor Company, MDT, Timney, Volquartsen and Shaw. These are separate upgrades; the scope rail does not require any of them. Match fixed-barrel versus Takedown configurations carefully and verify aftermarket receiver, stock and trigger clearance before mixing components.
Major 10/22 Upgrades
Finish Your Ruger 10/22 Build
Explore complete stocks, trigger assemblies, barrels and bolts. Every option is a separate purchase requiring its own fitment check.
Victor CompanyTITAN22 Stock BlackPrecision-oriented stock for standard fixed-barrel 10/22 builds.View Product →MDT10/22 Field Stock FDEFlat Dark Earth stock option for a purpose-built 10/22 setup.View Product →VolquartsenTG2000 Trigger AssemblyComplete trigger-group alternative for 10/22 rifles.View Product →Timney10/22 Two-Stage TriggerTimney complete two-stage trigger assembly in black.View Product →Shaw18-inch Stainless BarrelFixed-barrel Ruger 10/22 upgrade; check stock barrel channel.View Product →VolquartsenCompetition Bolt BlackComplete bolt assembly option for 10/22 builds.View Product →Did You Know? Pete’s Pillars Sells More Than Pillars.
Find quality parts for rimfire builds, from optics and mounting hardware to major stock, barrel and trigger upgrades.
Key Specifications
Brand: Midwest Industries
Manufacturer Part Number: MI-1022SM
Pete’s Pillars Listing SKU: MI-1022SM-BLK
UPC: 816537011224
Product Type: One-piece receiver-mounted Picatinny scope rail
Compatibility: Ruger 10/22 receivers and compatible clones using the factory scope-mount hole pattern
Attachment: Factory receiver mounting holes
Material: 6061 aluminum
Finish: Hardcoat anodized, matte black
Overall Length: 4.650 inches
Weight: Approximately 1.6 oz with screws
Included: Scope rail and mounting screws; optics and scope rings sold separately
MOA Cant: Not numerically specified by the manufacturer
Warranty: Midwest Industries lifetime warranty, per manufacturer terms
Midwest Industries MI-1022SM Frequently Asked Questions
What rifles does the Midwest Industries MI-1022SM scope rail fit?
Midwest Industries specifies this rail for Ruger 10/22 receivers and compatible 10/22-pattern clones that use the factory optic-base mounting-hole pattern. Check the exact receiver and any aftermarket modifications before purchase.
Will this rail fit a Ruger 10/22 Takedown or 10/22 Charger?
The rail mounts to the receiver, and Midwest Industries describes compatibility in terms of 10/22 receivers and clones. The maker does not separately specify every Takedown and Charger configuration on its product page, so confirm your receiver hole pattern, stock or handguard clearance, and optic arrangement before ordering.
Does the MI-1022SM attach to the receiver or the barrel?
It attaches to the top of the receiver using the factory mounting holes. It does not attach to the barrel, and it does not convert a 10/22 Takedown into a barrel-mounted optics system.
Is the rail Picatinny or Weaver?
The MI-1022SM is a Picatinny rail. Select optic mounts or scope rings specified to clamp securely to a Picatinny base. Some Weaver-style accessories also fit Picatinny rails, but do not assume every cross-slot or clamp is interchangeable.
Are mounting screws included?
Yes. Product documentation and listings for the Midwest Industries 10/22 scope base identify mounting hardware as included. The 1.6 oz published weight includes screws. The scope, scope rings, and red-dot sight are separate purchases.
Will I need to drill or modify my Ruger 10/22 receiver?
The rail is designed to use the existing factory scope-mount holes on a compatible receiver, so drilling new holes is not part of its intended installation. Verify the actual receiver before proceeding, and follow Midwest Industries mounting instructions.
What is the Midwest Industries 10/22 rail made from?
It is made from 6061 aluminum with a matte black hardcoat-anodized finish. Its published overall length is 4.650 inches, and it weighs approximately 1.6 ounces with screws.
Does the MI-1022SM have 0 MOA or 25 MOA cant?
Midwest Industries does not specify a numerical MOA cant in the published MI-1022SM product details, so this listing does not assign an unverified 0 MOA value. For a scope base explicitly labeled 25 MOA, see the DIP RUG-11025B 25 MOA rail.
Can I still use the factory iron sights with this mount?
Do not assume so. Midwest Industries does not publish a specific iron-sight sightline or co-witness clearance claim for this model. The DIP RUG-11022B rail is separately advertised with a center channel for viewing factory sights, but actual sight clearance should still be checked.
Can I mount a red dot directly to this rail?
A red dot with a compatible Picatinny clamp or adapter can be fitted to the rail. Some open-emitter sights use a proprietary footprint and need a separate Picatinny adapter. Check the chosen optic’s mounting interface; the MI-1022SM is not an optic or a footprint converter by itself.
Which scope rings should I choose for a 10/22 Picatinny rail?
Match the rings to the scope tube diameter (for example, 1 inch or 30mm), Picatinny compatibility, objective-bell and receiver clearance, and a comfortable eye position. We stock Warne 1-inch Maxima QD rings and Warne 30mm Maxima QD rings; these are alternatives for different tube sizes, not two sets needed together.
Is this rail compatible with aftermarket 10/22 receivers?
Midwest Industries states compatibility with 10/22 receivers and clones, but clone receivers may vary in mounting-hole dimensions, upper receiver contours, or hole spacing. Verify the specific manufacturer’s scope-base pattern instead of relying only on the words 10/22 compatible.
Does the mount include a scope, rings, or red dot?
No. The item for sale is the Midwest Industries Picatinny scope rail with the appropriate mounting hardware. Any optic, rings, adapters, stock, barrel, or trigger shown elsewhere on the page is sold separately.
What warranty covers this scope mount?
Midwest Industries advertises a lifetime warranty for this scope mount, subject to the manufacturer’s current terms and coverage decisions. Pete’s Pillars is an authorized Midwest Industries dealer.
Small Change. Big Impact. Pete’s Pillars.
| Brand | Midwest Industries |
| Gun Platform | 10/22 |
| Type | Scope Mount |