Scope Mounts & Rails
Your scope can only hold zero if the mount under it does. A solid Picatinny rail gives you a repeatable mounting surface, room to position your rings and, with a canted rail, extra elevation for longer shots. We machine our own Pete's Pillars CZ 457 rails in the USA, and as an authorized dealer for Area 419, Talley, Warne, Leupold, L3i, Position7, DIP, MDT and Midwest Industries, we carry rails, mounts and rings for CZ, Tikka, Ruger, Anschutz, Savage and more.
Shop Pete's Pillars RailsFind your rail.
Our CZ 457 11mm dovetail to Picatinny rails in 0, 15 and 30 MOA, plus the mounting hardware we machine for M-LOK and ARCA setups.
Shop by Platform
Rails are made for specific receivers. Start with your rifle or pistol.
CZ 457
Pete's Pillars rails lead the lineup, alongside mounts from Area 419, L3i, Position7, DIP and MDT, from 0 MOA to 50 MOA and 10 MRAD.
Shop CZ 457 RailsCZ 452 / 453 / 455
DIP 11mm and 3/8 dovetail to Picatinny mounts, including extended and left-hand options.
Shop CZ 455 RailsCZ 512 & 527
DIP rails for the CZ 512 11mm dovetail and the CZ 527 16mm dovetail.
Shop CZ 512 & 527 RailsTikka T1x
Talley and DIP Picatinny bases, including 25 MOA and left-hand options.
Shop Tikka T1x RailsRuger 10/22
The Midwest Industries Picatinny scope mount for the 10/22.
Shop 10/22 RailsAnschutz 64
DIP dovetail to Picatinny bases in flat and 25 MOA.
Shop Anschutz RailsSavage MKII & 93
DIP rail mount bases for Savage MKI, MKII and 93 series rimfires.
Shop Savage RailsKimber & Marlin
DIP mounts for the Kimber 82G and Marlin rimfire receivers.
Shop Kimber & MarlinRimfire Pistols
Picatinny mounts for the S&W SW22 Victory and the Ruger Mark III, Mark IV and 22/45.
Shop Pistol MountsShop by Brand
Our own rails, plus the mounting and optics brands we stock and support.
Pete's Pillars
Made in the USA. CZ 457 Picatinny rails in 0, 15 and 30 MOA and machined M-LOK T-nuts.
Shop Pete's Pillars RailsArea 419
CZ 457 dovetail to Picatinny rails in 15, 30 and 50 MOA. Compare with the Pete's Pillars CZ 457 rail.
Shop Area 419 RailsDIP / DiProducts
The widest rimfire mount lineup we carry: CZ, Tikka, Anschutz, Savage, Kimber, Marlin and SW22.
Shop DIP MountsTalley
Precision Picatinny scope bases, including the Tikka T1x base.
Shop Talley BasesWarne
Maxima rimfire dovetail rings, Maxima QD rings and skeletonized 1-inch and 30mm MSR mounts, including 20 MOA.
Shop WarneLeupold
Rifleman see-thru rings, plus Mark 5HD and VX Freedom Rimfire scopes to top the rail.
Shop LeupoldMDT
CZ 457 rails from 20 to 50 MOA, plus M-LOK ARCA rails and the Oryx full-length ARCA forend rail.
Shop MDT RailsMidwest Industries
Ruger 10/22 scope mounts and M-LOK Picatinny rail sections.
Shop Midwest IndustriesL3i
The CZ 457 10 MRAD Picatinny scope base, plus billet aluminum magazines and a drop-in match barrel for a complete CZ build.
Shop L3iPosition7
The CZ 457 Pro Scope Base: a 30 MOA clamp-on 7075 billet base with a brass deflector and bubble level, in right and left hand. Plus billet magazines and firing pins.
Shop Position7Shop by Type
Canted, ARCA, M-LOK, one-piece and left-hand mounting, plus rings.
Canted MOA Rails
Built-in elevation from 15 to 50 MOA to reach farther with your scope's adjustment.
Shop MOA RailsARCA Rails
Clamp to a tripod or ARCA bipod for barricade and positional shooting.
Shop ARCA RailsM-LOK Rail Sections
Add Picatinny or ARCA real estate to any M-LOK forend.
Shop M-LOK RailsLeft-Hand Mounts
Left-hand mounts for CZ and Tikka rimfire rifles.
Shop Left-Hand MountsCantilever & MSR Mounts
Warne skeletonized one-piece mounts in 1-inch and 30mm, flat or 20 MOA.
Shop MSR MountsScope Rings
Warne Maxima and Leupold Rifleman rings in 1-inch and 30mm.
Shop Scope RingsUpgrade the Rifle
Optics and parts that pair with a solid mount.
Accessories & Gear
Bipods, mounting and support gear for the finished rifle.
Mount It Once. Mount It Right.
A scope is only as repeatable as the rail under it. Our CZ 457 rails are machined to clamp the 11mm dovetail and give you a full-length Picatinny surface for ring placement, in 0, 15 and 30 MOA. Set it, torque it, and stop chasing your zero.
Choosing a Scope Rail
Dovetail to Picatinny
Many rimfire receivers have a factory dovetail, like the 11mm dovetail on the CZ 455 and 457 or a 3/8 inch dovetail on other rimfires. A dovetail to Picatinny rail clamps to that dovetail and gives you a standard Picatinny surface for any ring.
Flat or canted (MOA)
A canted rail builds in elevation so your scope can reach farther before running out of adjustment. A flat 0 MOA rail suits close and mid range rimfire. For extended range, a 15 to 30 MOA rail is a common choice. Check your scope's total elevation travel before you pick.
ARCA and M-LOK
ARCA rails let you clamp the rifle to a tripod or ARCA bipod for positional shooting. M-LOK rail sections add mounting points to a chassis or stock forend.
Finish the setup
Pair your rail with quality scope rings like Warne Maxima or Leupold Rifleman, or skip separate rings with a Warne one-piece MSR mount. Top it with a rifle scope and torque everything to the manufacturer's spec. Building out a CZ 457? Look at the Position7 CZ 457 Pro Scope Base, a 30 MOA clamp-on base with a built-in bubble level and brass deflector, or the L3i CZ 457 10 MRAD base. Both brands also make billet magazines for the 457.
Scope Rail FAQ
Do I need a canted rail for rimfire?
Not for most close and mid range shooting. A canted rail helps when you shoot rimfire at extended distances and need more elevation than your scope has on its own.
Will a CZ 455 rail fit my CZ 457?
Not always. Both use an 11mm dovetail, but receiver shapes differ between models. Choose a rail listed for your exact rifle, and check the fitment notes before ordering.
Can I use my existing scope rings?
A Picatinny rail needs Picatinny rings. If your current rings clamp directly to a dovetail, you will need Picatinny rings to use them on a rail.
How do I install a scope rail?
Clean the receiver and screws, follow the manufacturer's torque spec and thread locker guidance, and check that the rail is fully seated before mounting your rings.
Keep Building
More from the bench.
Scope Bases
Scope bases for rimfire and centerfire receivers.
Shop Scope BasesBolt Knobs
USA-made Pete's Pillars billet aluminum bolt knobs for the CZ 455 and 457.
Shop Bolt KnobsRifle Chassis
MDT, KRG, XLR, Grey Birch and Victor Titan chassis for rimfire and centerfire rifles.
Shop Rifle ChassisShop All Brands
Every manufacturer we carry in one place, from MDT and Volquartsen to our own USA-made parts.
Browse Brands