Victor Company USATITAN22 Precision Stocks & Ruger 10/22 Accessories
Victor Company builds practical components for precision rimfire shooters, led by the TITAN22 stock for Ruger 10/22-pattern rifles. Shop rigid composite stocks, universal cheekrest kits, receiver anchors and rail systems at Pete's Pillars, then finish your build with the parts that work together.
TITAN22 Precision Rimfire Stocks
The TITAN22 is built for Ruger 10/22-pattern rifles, using rigid fiberglass-reinforced composite construction and Victor Company's Anchor Lock bedding system. Start with your preferred stock finish and confirm receiver fitment before ordering.
TITAN22 Precision Stock — Black
Rigid fiberglass composite, aluminum anchoring surfaces and precision-rimfire ergonomics in a classic black finish.
View Black TITAN22 →
TITAN22 Precision Stock — FDE
The same precision-minded TITAN22 platform in Flat Dark Earth, ready for a compatible Ruger 10/22 receiver and barrel.
View FDE TITAN22 →
TITAN22 Precision Stock — OD Green
The TITAN22 precision rimfire stock in OD Green, offering the same rigid construction and receiver support in an understated field finish.
View OD Green TITAN22 →The TITAN22 is not a universal 10/22 stock; certain receivers with rear tangs and other specialized configurations require separate verification.
A Better Foundation for Your 10/22
The TITAN22 is designed around action support and repeatable handling rather than cosmetic changes alone. Its construction and mounting features make it a useful starting point for a precision-rimfire build.
Front and rear aluminum anchoring surfaces are designed to support the compatible 10/22 receiver with reduced movement.
Fiberglass-reinforced construction and a free-floating barrel channel support precision-focused builds. Victor specifies barrel clearance up to 1 inch.
Ambidextrous stock profile, textured gripping surfaces and integrated flush-cup sling mounting for field and range use.
Universal Cheekrest Kits
The TITAN Universal and GRIPPY cheekrests let shooters raise comb height for better eye alignment with an optic. These kits also fit many other stock designs, but installation and stock-contour compatibility should be checked before ordering.
TITAN Cheekrest — BlackUniversal kit with stackable height spacers.View Kit →
TITAN Cheekrest — FDEUniversal cheekrest in Flat Dark Earth.View Kit →
TITAN Cheekrest — OD GreenUniversal kit with matching OD Green finish.View Kit →
GRIPPY Cheekrest — BlackTextured cheekrest surface for consistent contact.View GRIPPY →
Victor Company TRS 12-Inch ARCA Rail
For TITAN22 builds that need a longer support interface, the TRS rail adds a 12-inch ARCA-style dovetail for compatible bipods, tripods and shooting supports. The rail includes TITAN22 mounting hardware and a textured underside for supported shooting.
Explore the TRS ARCA RailPair It With
Small components for the right mounting arrangement. The KIDD-compatible rear anchor is a separate part for the specified receiver setup, not a required add-on for every TITAN22.
Finish Your 10/22 Build
A great stock is only one part of the rifle. Pete's Pillars carries barrels, trigger components, bolt parts, optics and support accessories from established manufacturers. We also carry KIDD-related parts and Volquartsen upgrades for compatible Ruger 10/22 builds.
Ruger 10/22 Barrels
Explore Green Mountain barrels and build options across popular rimfire contours.
Browse Barrels →Volquartsen Components
Shop precision-minded barrels, bolts, triggers and other compatible 10/22 upgrades.
Shop Volquartsen →KIDD Components
Compare KIDD-related rimfire parts and receiver-specific options for your build.
Explore KIDD →Rifle Scopes
Find the optic suited to your target, range and preferred shooting setup.
Shop Optics →Optic Mounting
Choose rails, rings and mounting accessories for the receiver and scope you run.
Shop Mounts →Bipods & Supports
Match your support system to a compatible Picatinny or ARCA mounting interface.
Shop Bipods →Did You Know We Make 10/22 Parts?
Pete's Pillars manufactures practical small parts and carries complementary components for the Ruger 10/22. Alongside a Victor Company stock, you can shop our recoil buffers and other hardware, plus barrels, triggers, magazines and optics in one place.
Why Victor Company?
Victor Company USA approaches the Ruger 10/22 from the stock outward. The TITAN22 combines a rigid composite stock with front and rear action support, while the compatible cheekrests and mounting hardware let shooters tailor their setup for optics and supported shooting. It's an approachable way to improve the feel and stability of a familiar rimfire platform.
At Pete's Pillars, we stock Victor Company products as an authorized dealer and pair them with related rimfire parts. Whether you're replacing a factory stock, adding a cheek riser, or choosing an ARCA rail, start with the Victor Company collection and use our Ruger 10/22 parts hub to complete the rifle.
Victor Company TITAN22 FAQ
What rifles does the Victor Company TITAN22 stock fit?
The TITAN22 is intended for compatible Ruger 10/22-pattern rifle receivers. Not every 10/22 variant or aftermarket receiver has the same bedding or rear-tang geometry. Check the exact stock listing and receiver configuration before ordering.
Will the TITAN22 fit a Ruger 10/22 Competition receiver?
Do not assume so. The TITAN22 product listings warn that specified Ruger 10/22 Competition models with a rear tang do not fit the standard stock. Verify your exact model number and receiver arrangement.
Can the TITAN22 accommodate a bull barrel?
Victor Company specifies a free-floating barrel channel that accepts barrel profiles up to 1.00 inch in diameter. Confirm the actual contour and your complete rifle configuration before selecting a barrel.
Do I need the KIDD-compatible rear anchor?
Only for the relevant receiver setup. Victor Company's KIDD-compatible rear anchor is offered separately for specified KIDD receivers and TITAN22 stocks. It should not be treated as a required part for every Ruger 10/22.
Do TITAN Universal cheekrests fit other stocks?
Yes, Victor Company markets them for a range of compatible stocks beyond the TITAN22. Stock shape and comb width matter, and the installation involves mounting hardware. Review the exact product instructions before drilling or fitting the kit.
What is the difference between the TITAN and GRIPPY cheekrests?
Both offer spacer-based height adjustment for compatible stocks. The GRIPPY version adds a textured gripping surface; the regular TITAN is available in multiple colors. Choose based on stock fit and the surface feel you prefer.
Can I attach an ARCA bipod to the TITAN22?
With a suitable ARCA mounting interface. Victor Company's separate TRS 12-inch ARCA rail provides a compatible dovetail when correctly installed, while the mini Picatinny rail is intended for Picatinny-mounted accessories. Match the rail and bipod clamp type before ordering.