MDT | M-LOK CHASSIS ACCESSORY | BLACK
Better Contact on Bags and Barricades.
The MDT Baker Wings 106385-BLK add a broad, flat contact area to the sides of a compatible M-LOK rifle chassis. Designed and tested with precision competitor Keith Baker, the paired aluminum wings help stabilize the forend on bags, barricades and uneven support surfaces while giving your support hand more room to work.
Each wing measures approximately 9″ long, with a textured contact surface and an integrated QD sling cup. The set mounts on the left and right sides of a suitable M-LOK forend and includes the needed installation hardware. They are particularly relevant to MDT ACC Elite, ACC Premier, ESS and LSS-XL Gen2 builds where repeatable contact and support-hand control matter.
Baker Wings are not an ARCA rail or a dedicated weight kit. They expand lateral contact on a bag; ARCA rails manage bottom-mounted support positioning, while forend weights tune balance. You can build around all three functions, but plan available M-LOK slots and accessory clearance before stacking hardware.
Pair It With
Three practical additions for an MDT competition build: a repeatable thumb position, adjustable forend balance, and a magazine matched to the action and cartridge.
MDT Adjustable M-LOK Thumb Rest106900-BLK; tune the support-hand position
MDT Exterior Forend Weights + QD107320-BLK; two M-LOK weights with QD
MDT 10-Round Metal AICS MagazineShort-action .308 / 6.5 CM; verify cartridge and inletBuild the Support System
M-LOK Weights & ARCA Rails
Add balance with exterior weights or an ARCA support interface. Check M-LOK placement and physical clearance alongside Baker Wings; not every accessory can occupy the same slots.
MDT · BalanceMDT Exterior Forend Weights107636-BLK; two M-LOK weights without QDView Product →
Pete’s Pillars · BalancePete's Pillars Exterior Weight Pair12.3 oz two-pack for compatible M-LOK forendsView Product →
Pete’s Pillars · BalancePete's Pillars Exterior Weight PairAlternative 12.3 oz pair for compatible MDT M-LOKView Product →
MDT · ARCAMDT 10.25″ M-LOK ARCA RailExtended bipod and support positioningView Product →
MDT · ARCAMDT 8.6″ M-LOK ARCA RailLonger ARCA support surfaceView Product →
MDT · ARCAMDT 7″ M-LOK ARCA RailMedium-length support interface for compatible M-LOKView Product →
MDT · ARCAMDT 3.3″ M-LOK ARCA RailShort dovetail segment for compatible M-LOK forendsView Product →Build Around the Right Chassis
Premium MDT Competition Chassis
Explore ACC Elite and ACC Premier Gen2 across different rifle inlets. Check each model’s M-LOK mounting layout and select the inlet for your rifle.
MDT · Tikka T3/T3x SAACC Elite — Tikka Titanium Blue106826-TBL; Elite chassis for a Tikka inletView Product →
MDT · CZ 457ACC Elite — CZ 457 Black107957-BLK; precision rimfire inletView Product →
MDT · Rem 700 SAACC Premier Gen2 — 700 SA Black109512-BLK; another premium competition optionView Product →
MDT · Tikka T3/T3x SAACC Premier Gen2 — Tikka FDE109722-FDE; Tikka competition chassisView Product →
MDT · CZ 457ACC Premier Gen2 — CZ 457 Green109725-CCG; rimfire competition chassisView Product →
MDT · Savage SAACC Premier Gen2 — Savage FDE109728-FDE; Savage inlet alternativeView Product →Round Out the Build
Precision Support & Magazines
Premium bipods, a compatible ACC Elite bridge and AICS magazine options. Magazine selection depends on your rifle action, cartridge and chassis.
MDT · Premium SupportMDT CKYE-POD Gen3 Double PullHigh-end bipod for positional shootingView Product →
MDT · BipodMDT GRND-POD — ARCARRS/ARCA dovetail interfaceView Product →
MDT · Chassis AccessoryMDT ACC Elite Control BridgeBridge for compatible ACC Elite configurationsView Product →
MDT · Positional SupportMDT M-LOK Barricade StopRound-face stop for alternate barricade contactView Product →
MDT · MagazineMDT 5-Round Metal AICS Magazine5-round .308 / 6.5 CM short-action optionView Product →
MDT · MagazineMDT 10-Round Poly/Metal AICS MagazineAICS-style magazine with a different constructionView Product →
Key Specifications
MPN: 106385-BLK
Mount: M-LOK chassis / forend
Material: 6061-T6 Aluminum
Size: Approx. 9″ × 1″ × 1″ per wing
Weight: Approx. 0.40 lb per wing
Sling Mounts: Integrated QD cups
Finish: Black
Included: Left and right Baker Wings; installation hardware
Did You Know? Pete’s Pillars Sells More Than Pillars.
We manufacture practical rifle parts and carry chassis accessories, barrels and optics from established brands.
Frequently Asked Questions (12) — Expand / Collapse
What are MDT Baker Wings used for in PRS or NRL competition?
MDT Baker Wings increase the width and flat bag-contact area of a compatible M-LOK chassis forend. In barricade, bag-supported and positional stages, that can help shooters settle the rifle more consistently and guide recoil tracking. They also create a broad contact area for the support hand.
Will MDT Baker Wings fit the ACC Elite, ACC Premier or other MDT chassis?
They mount to compatible M-LOK forends, including MDT ACC Elite, ACC Premier, ESS, LSS-XL Gen2 and certain TAC21 configurations with M-LOK. Confirm the available uninterrupted M-LOK slot layout and other installed accessories. The wing is not rifle-inlet-specific: compatibility follows the forend mounting interface, not whether the action is Tikka, Remington 700 or another platform.
Are Baker Wings sold as one piece or as a left-and-right pair?
The 106385-BLK kit includes two wings, one for each side, together with the installation hardware. You do not need to purchase two kits to outfit both sides of a compatible chassis.
How much do MDT Baker Wings weigh, and how wide are they?
Each CNC-machined 6061-T6 aluminum wing is approximately 9″ long × 1″ × 1″ and weighs about 0.40 lb. The two wings add approximately 0.8 lb total, and MDT notes the pair adds about 2″ of forend width.
Can I use Baker Wings with MDT chassis weights or exterior M-LOK weights?
Potentially, yes, if the attachment points and installed components have adequate clearance. The wings offer a broad support surface; MDT exterior weights with QD and Pete’s Pillars M-LOK weight pairs tune rifle balance. They are different accessories and may compete for the same M-LOK mounting space. Plan exact positions before ordering.
Can an MDT ARCA rail be used with Baker Wings?
Yes, on a chassis that supports both installations with sufficient clearance. Baker Wings mount laterally; an MDT M-LOK ARCA rail provides a bottom dovetail interface for compatible bipods or tripods. An ARCA rail is not included with the Baker Wings, and a particular bipod may require its own ARCA clamp.
Do the Baker Wings include QD sling sockets and installation hardware?
Yes. The left and right wings have integrated QD flush cups, and MDT supplies the relevant mounting hardware. Follow MDT’s instructions for proper M-LOK engagement and mounting alignment; make sure you have sufficient slots and clearance.
Baker Wings vs. an ARCA rail or chassis forend weights: which should I buy?
Choose based on the problem you want to solve. Baker Wings widen your side contact for bags and barricades; ARCA rails provide a moveable underside mounting interface; forend weights change mass distribution and balance. Many competition builds use more than one approach, provided their mounting positions do not interfere.
What is the MDT 106900 adjustable thumb rest, and does it pair with Baker Wings?
The MDT 106900 M-LOK Adjustable Thumb Rest addresses support-hand or thumb placement, while Baker Wings address external bag and barricade contact. They can complement one another where the M-LOK layout permits. Verify your chassis interface and where both parts would attach.
Do I need an AICS magazine for an ACC Elite or Remington 700 competition chassis?
Many MDT ACC Elite configurations accept AICS-pattern magazines, but the correct magazine depends on action length, cartridge and the exact chassis inlet. For a compatible .308 Win / 6.5 Creedmoor short-action build, compare MDT’s 10-round metal AICS magazine and 5-round metal version. The Baker Wings themselves do not affect magazine fit.
Can I install Baker Wings on a 106557 ACC Elite Remington 700 SA or a Tikka ACC Elite?
The 106557-CBL ACC Elite Remington 700 SA has a different rifle inlet than the 106826-TBL Tikka T3/T3x SA, but both are in the ACC Elite family. Baker Wings mount to compatible forend M-LOK, independent of receiver inlet. Confirm sufficient mounting space and clearance from your accessories before installation.
Who designed MDT Baker Wings and what shooting styles are they intended for?
They were developed and tested with Keith Baker, an MDT Prostaff precision-rifle competitor. The wide, flat wing geometry is intended for PRS, NRL, barricade and bag-supported precision shooting, especially when a stable side-contact point helps manage the rifle’s position on unconventional supports.
Pete’s Pillars is an authorized MDT dealer.
Small Change. Big Impact. Pete’s Pillars.
MDT | M-LOK CHASSIS ACCESSORY | BLACK
Better Contact on Bags and Barricades.
The MDT Baker Wings 106385-BLK add a broad, flat contact area to the sides of a compatible M-LOK rifle chassis. Designed and tested with precision competitor Keith Baker, the paired aluminum wings help stabilize the forend on bags, barricades and uneven support surfaces while giving your support hand more room to work.
Each wing measures approximately 9″ long, with a textured contact surface and an integrated QD sling cup. The set mounts on the left and right sides of a suitable M-LOK forend and includes the needed installation hardware. They are particularly relevant to MDT ACC Elite, ACC Premier, ESS and LSS-XL Gen2 builds where repeatable contact and support-hand control matter.
Baker Wings are not an ARCA rail or a dedicated weight kit. They expand lateral contact on a bag; ARCA rails manage bottom-mounted support positioning, while forend weights tune balance. You can build around all three functions, but plan available M-LOK slots and accessory clearance before stacking hardware.
Pair It With
Three practical additions for an MDT competition build: a repeatable thumb position, adjustable forend balance, and a magazine matched to the action and cartridge.
MDT Adjustable M-LOK Thumb Rest106900-BLK; tune the support-hand positionMDT Exterior Forend Weights + QD107320-BLK; two M-LOK weights with QDMDT 10-Round Metal AICS MagazineShort-action .308 / 6.5 CM; verify cartridge and inletBuild the Support System
M-LOK Weights & ARCA Rails
Add balance with exterior weights or an ARCA support interface. Check M-LOK placement and physical clearance alongside Baker Wings; not every accessory can occupy the same slots.
MDT · BalanceMDT Exterior Forend Weights107636-BLK; two M-LOK weights without QDView Product →Pete’s Pillars · BalancePete's Pillars Exterior Weight Pair12.3 oz two-pack for compatible M-LOK forendsView Product →Pete’s Pillars · BalancePete's Pillars Exterior Weight PairAlternative 12.3 oz pair for compatible MDT M-LOKView Product →MDT · ARCAMDT 10.25″ M-LOK ARCA RailExtended bipod and support positioningView Product →MDT · ARCAMDT 8.6″ M-LOK ARCA RailLonger ARCA support surfaceView Product →MDT · ARCAMDT 7″ M-LOK ARCA RailMedium-length support interface for compatible M-LOKView Product →MDT · ARCAMDT 3.3″ M-LOK ARCA RailShort dovetail segment for compatible M-LOK forendsView Product →Build Around the Right Chassis
Premium MDT Competition Chassis
Explore ACC Elite and ACC Premier Gen2 across different rifle inlets. Check each model’s M-LOK mounting layout and select the inlet for your rifle.
MDT · Tikka T3/T3x SAACC Elite — Tikka Titanium Blue106826-TBL; Elite chassis for a Tikka inletView Product →MDT · CZ 457ACC Elite — CZ 457 Black107957-BLK; precision rimfire inletView Product →MDT · Rem 700 SAACC Premier Gen2 — 700 SA Black109512-BLK; another premium competition optionView Product →MDT · Tikka T3/T3x SAACC Premier Gen2 — Tikka FDE109722-FDE; Tikka competition chassisView Product →MDT · CZ 457ACC Premier Gen2 — CZ 457 Green109725-CCG; rimfire competition chassisView Product →MDT · Savage SAACC Premier Gen2 — Savage FDE109728-FDE; Savage inlet alternativeView Product →Round Out the Build
Precision Support & Magazines
Premium bipods, a compatible ACC Elite bridge and AICS magazine options. Magazine selection depends on your rifle action, cartridge and chassis.
MDT · Premium SupportMDT CKYE-POD Gen3 Double PullHigh-end bipod for positional shootingView Product →MDT · BipodMDT GRND-POD — ARCARRS/ARCA dovetail interfaceView Product →MDT · Chassis AccessoryMDT ACC Elite Control BridgeBridge for compatible ACC Elite configurationsView Product →MDT · Positional SupportMDT M-LOK Barricade StopRound-face stop for alternate barricade contactView Product →MDT · MagazineMDT 5-Round Metal AICS Magazine5-round .308 / 6.5 CM short-action optionView Product →MDT · MagazineMDT 10-Round Poly/Metal AICS MagazineAICS-style magazine with a different constructionView Product →Key Specifications
MPN: 106385-BLK
Mount: M-LOK chassis / forend
Material: 6061-T6 Aluminum
Size: Approx. 9″ × 1″ × 1″ per wing
Weight: Approx. 0.40 lb per wing
Sling Mounts: Integrated QD cups
Finish: Black
Included: Left and right Baker Wings; installation hardware
Did You Know? Pete’s Pillars Sells More Than Pillars.
We manufacture practical rifle parts and carry chassis accessories, barrels and optics from established brands.
Frequently Asked Questions (12) — Expand / Collapse
What are MDT Baker Wings used for in PRS or NRL competition?
MDT Baker Wings increase the width and flat bag-contact area of a compatible M-LOK chassis forend. In barricade, bag-supported and positional stages, that can help shooters settle the rifle more consistently and guide recoil tracking. They also create a broad contact area for the support hand.
Will MDT Baker Wings fit the ACC Elite, ACC Premier or other MDT chassis?
They mount to compatible M-LOK forends, including MDT ACC Elite, ACC Premier, ESS, LSS-XL Gen2 and certain TAC21 configurations with M-LOK. Confirm the available uninterrupted M-LOK slot layout and other installed accessories. The wing is not rifle-inlet-specific: compatibility follows the forend mounting interface, not whether the action is Tikka, Remington 700 or another platform.
Are Baker Wings sold as one piece or as a left-and-right pair?
The 106385-BLK kit includes two wings, one for each side, together with the installation hardware. You do not need to purchase two kits to outfit both sides of a compatible chassis.
How much do MDT Baker Wings weigh, and how wide are they?
Each CNC-machined 6061-T6 aluminum wing is approximately 9″ long × 1″ × 1″ and weighs about 0.40 lb. The two wings add approximately 0.8 lb total, and MDT notes the pair adds about 2″ of forend width.
Can I use Baker Wings with MDT chassis weights or exterior M-LOK weights?
Potentially, yes, if the attachment points and installed components have adequate clearance. The wings offer a broad support surface; MDT exterior weights with QD and Pete’s Pillars M-LOK weight pairs tune rifle balance. They are different accessories and may compete for the same M-LOK mounting space. Plan exact positions before ordering.
Can an MDT ARCA rail be used with Baker Wings?
Yes, on a chassis that supports both installations with sufficient clearance. Baker Wings mount laterally; an MDT M-LOK ARCA rail provides a bottom dovetail interface for compatible bipods or tripods. An ARCA rail is not included with the Baker Wings, and a particular bipod may require its own ARCA clamp.
Do the Baker Wings include QD sling sockets and installation hardware?
Yes. The left and right wings have integrated QD flush cups, and MDT supplies the relevant mounting hardware. Follow MDT’s instructions for proper M-LOK engagement and mounting alignment; make sure you have sufficient slots and clearance.
Baker Wings vs. an ARCA rail or chassis forend weights: which should I buy?
Choose based on the problem you want to solve. Baker Wings widen your side contact for bags and barricades; ARCA rails provide a moveable underside mounting interface; forend weights change mass distribution and balance. Many competition builds use more than one approach, provided their mounting positions do not interfere.
What is the MDT 106900 adjustable thumb rest, and does it pair with Baker Wings?
The MDT 106900 M-LOK Adjustable Thumb Rest addresses support-hand or thumb placement, while Baker Wings address external bag and barricade contact. They can complement one another where the M-LOK layout permits. Verify your chassis interface and where both parts would attach.
Do I need an AICS magazine for an ACC Elite or Remington 700 competition chassis?
Many MDT ACC Elite configurations accept AICS-pattern magazines, but the correct magazine depends on action length, cartridge and the exact chassis inlet. For a compatible .308 Win / 6.5 Creedmoor short-action build, compare MDT’s 10-round metal AICS magazine and 5-round metal version. The Baker Wings themselves do not affect magazine fit.
Can I install Baker Wings on a 106557 ACC Elite Remington 700 SA or a Tikka ACC Elite?
The 106557-CBL ACC Elite Remington 700 SA has a different rifle inlet than the 106826-TBL Tikka T3/T3x SA, but both are in the ACC Elite family. Baker Wings mount to compatible forend M-LOK, independent of receiver inlet. Confirm sufficient mounting space and clearance from your accessories before installation.
Who designed MDT Baker Wings and what shooting styles are they intended for?
They were developed and tested with Keith Baker, an MDT Prostaff precision-rifle competitor. The wide, flat wing geometry is intended for PRS, NRL, barricade and bag-supported precision shooting, especially when a stable side-contact point helps manage the rifle’s position on unconventional supports.
Pete’s Pillars is an authorized MDT dealer.
Small Change. Big Impact. Pete’s Pillars.
| Brand | MDT |
| Type | Chassis Parts & Accessories |
| For Gun Type | Rifle, Bolt Action |