MDT ACC ELITE CHASSIS SYSTEM | REMINGTON 700 SA | CYAN & BLACK TOPO | 106557-CBL
MDT's Flagship, Finished in Our Shop.
The MDT ACC Elite is the competition chassis MDT built to win with: aircraft-grade 6061 aluminum, a 19″ forend with full-length integrated ARCA, internal and external weight tuning, and a 12.25″ to 14.75″ length of pull. This one wears a Cyan and Black Topo Cerakote finish applied by Pete's Pillars, and it ships with the SRS-X Elite buttstock and Vertical Grip Elite already on it.
At the top of the PRS game the chassis stops being a stock and becomes a tuning platform. The ACC Elite is built for that: a reinforced center section and forend so nothing flexes under a loaded bipod, full-length ARCA so your bipod and bag rider go exactly where the stage wants them, and a weight system that lets you move balance fore and aft until the rifle settles and tracks the way you want. Around 6.10 lbs bare, and it clears barrels up to about 1.35″, so a heavy competition contour fits. Use it for: PRS and NRL Open, team matches, F-Class and benchrest work, night hunting with a clip-on, and any Remington 700 or 700-clone build where the rifle is the serious part of the budget.
Built to Be Tuned.
The 19″ forend carries M-LOK along its length and full-length integrated ARCA underneath, so a bipod clamps anywhere and a rear bag rider moves with the stage instead of staying bolted to one spot. The chassis takes both internal and external MDT weights, which is the part that separates a competition chassis from a nice stock: you can add mass out at the muzzle to calm the reticle, or back toward the action to keep it manageable offhand. Weights are sold separately. It's also drilled and tapped for MDT's Control Bridge and Night Vision Hood systems, and it feeds AICS-pattern magazines.
Fit, and What's Already on It.
Length of pull runs about 12.25″ to 14.75″, with an adjustable cheek riser plus front and rear cheekpiece adjustment and an adjustable buttpad position, so you're setting eye alignment and shoulder contact independently rather than compromising between them. Three things come in the box that you'd otherwise be buying: the MDT SRS-X Elite buttstock, the MDT Vertical Grip Elite with connector bar, and custom-cut grip tape for the forend. Remington 700 pattern, short action, right hand.
Cyan and Black Topo, Done Here.
The topographic pattern in cyan over black is our finish work, not a factory option, and cyan is our color — it's the one running through everything we build. Cerakote is a ceramic-based coating, so it isn't just appearance: it adds abrasion and corrosion resistance to a chassis that's going to get dragged across barricades and rocks. We run custom Cerakote in house with fast in-stock lead times on most builds, in M81 Woodland, Arctic Camo, Snow Camo, Snow White, Robin's Egg Blue and Blaze Orange among others. Want a different pattern or a different color pairing on this chassis? Tell us what you're after.
We'll Match Your Bridges.
This is where a custom finish usually falls apart: you build a chassis in a custom color, then bolt a black bridge onto the top of it. The ACC Elite is drilled and tapped for MDT's Night Vision Bridge and Control Bridge, and we can Cerakote either one to match this Cyan and Black Topo finish so the rifle reads as one piece. Order the bridge with the chassis and let us know, and it comes back finished to match.
Our Take
We Machine the Weights This Chassis Is Built Around
Weight tuning is the whole point of an ACC, and the weights are sold separately. We machine M-LOK exterior forend weights for MDT chassis in a 12.3 oz 2-pack and a 6 oz mini 2-pack, plus machined M-LOK backing T-nuts, all made in the USA right here in Michigan. Run ours on the forend M-LOK and MDT's ACC interior weights inside, and you can move balance in small, repeatable steps instead of guessing.
See our M-LOK Forend Weights →Pair It With
MDT Ckye-Pod Gen 3Clamps anywhere on the full ARCA
Our M-LOK Forend Weights12.3 oz 2-pack, made in USA
MDT 20 MOA Scope BaseRem 700 SA, elevation for distance
Full-Length ARCA, Meet the Ckye-Pod
MDT Ckye-Pod Bipods
The bipod the ACC's ARCA rail was made for. Pan, cant and rapid leg deployment for match stages.
MDTCkye-Pod Gen 3 Double Pull4.6-11.9", pan and cant, ARCA throw lever.Shop Now →
MDTCkye-Pod Gen 3 CompactCompact Gen 3 for PRS and NRL22.Shop Now →
MDTCkye-Pod Gen 3 Compact4.6-11.9" ARCA / Picatinny.Shop Now →
MDTCkye-Pod Gen 3 Single Pull6-15", simpler single-pull legs.Shop Now →
MDTLightweight Ckye-PodRRS BTC double pull, lighter build.Shop Now →
MDTCkye-Pod Gen 2RRS BTC mount, standard legs.Shop Now →
MDTMountain Bipod5.7 oz carbon and titanium, direct ARCA.Shop Now →
MDTBackCountry Bipod7.5-14.3" carbon and titanium.Shop Now →
Build It Out
Bridges, Weights & Match Hardware
Bridges we can Cerakote to match, our machined weights, and the rest of the match setup.
MDTNight Vision Bridge, ACC EliteDrilled and tapped mount for NV. Cerakote to match.Shop Now →
MDTControl Bridge, ACC EliteAdds controls over the action. Cerakote to match.Shop Now →
Made in USAPete's PillarsM-LOK Forend Weights 12.3 ozExterior weights, 2-pack. Fits MDT.Shop Now →
Made in USAPete's PillarsM-LOK Mini Weights 6 ozFiner exterior tuning, 2-pack.Shop Now →
Made in USAPete's PillarsM-LOK Backing T-NutsMachined backing nuts, 2-pack.Shop Now →
MDTACC Interior Forend Weights5-pack of internal balance weights.Shop Now →
MDTM-LOK Adjustable Thumb RestSets thumb position behind the grip.Shop Now →
MDTM-LOK Baker WingsBag-riding wings for positional work.Shop Now →
MDTM-LOK Rear Bag RiderAluminum rider for the rear bag.Shop Now →
MDT20 MOA Picatinny Scope BaseRem 700 short action, 20 MOA.Shop Now →
MDTAICS 10-Round Magazine.308 and 6.5 Creedmoor, polymer.Shop Now →
The Next Level
Add a Bridge. We'll Cerakote It to Match.
- MDT Night Vision Bridge — mounts a clip-on NV unit ahead of the scope on the ACC Elite's drilled and tapped top.
- MDT Control Bridge — puts controls over the action for faster manipulation on the clock.
- Finished in Cyan and Black Topo by us, so the bridge matches the chassis instead of fighting it.
Order the bridge alongside the chassis and tell us to match it. Fast in-stock lead times on most builds.
Did You Know?
Pete's Pillars Sells More Than Pillars.
From centerfire chassis to optics and reloading, outfit every rifle in the safe in one place.
Optics & Mounts
Bipods & Magazines
Product Specifications
Manufacturer: MDT (Modular Driven Technologies)
MPN: 106557-CBL
Chassis Series: ACC Elite Chassis System
Platform: Remington 700 and 700 Clones, Short Action, Right Hand
Finish: Cyan and Black Topo Custom Cerakote by Pete's Pillars
Material: Aircraft-Grade 6061 Aluminum, Reinforced Center Section and Forend
Weight: Approx. 6.10 lbs (Depending on Configuration)
Length of Pull: Approx. 12.25″ to 14.75″
Cheek: Adjustable Riser with Front and Rear Cheekpiece Adjustment
Buttpad: Adjustable Position
Forend: Approx. 19″ with M-LOK; Full-Length Integrated ARCA Rail
Barrel Channel: Max Barrel Diameter Approx. 1.35″
Magazine: AICS Pattern
Weight System: Compatible with MDT Internal and External Weights (Sold Separately)
Bridges: Drilled and Tapped for MDT Control Bridge and Night Vision Hood (Sold Separately)
Includes: MDT SRS-X Elite Buttstock, MDT Vertical Grip Elite with Connector Bar, Custom-Cut Forend Grip Tape
Frequently Asked Questions
Fitment, the Cerakote finish, matching bridges, weights and bipods.
Will it fit my action?
This is the Remington 700 short action, right hand inlet, and it also fits common 700-pattern clones. It takes AICS-pattern magazines and clears barrels up to about 1.35″. Long action or left hand? Ask us and we'll point you at the right ACC.
Who applies the Cyan and Black Topo finish?
We do. The topo pattern in cyan over black is custom Cerakote applied by Pete's Pillars, not a factory MDT color. Cerakote is ceramic based, so along with the look it adds abrasion and corrosion resistance where the chassis takes a beating.
Can you Cerakote a bridge to match?
Yes. The ACC Elite is drilled and tapped for MDT's Night Vision Bridge and Control Bridge, and we'll finish either one in this same Cyan and Black Topo so the rifle matches end to end. Order the bridge with the chassis and tell us to match it. Fast in-stock lead times on most builds.
Can I get a different color or pattern?
We run custom Cerakote in house, including M81 Woodland, Arctic Camo, Snow Camo, Snow White, Robin's Egg Blue and Blaze Orange, with fast in-stock lead times on most builds. If you want a pattern or a color pairing you don't see listed, send us the idea. Prefer a factory finish? See the ACC Elite Rem 700 SA in Titanium Blue.
Are weights included?
No, weights are sold separately, which is normal for an ACC since everyone tunes differently. Use our 12.3 oz M-LOK forend weights or 6 oz mini weights on the exterior with our backing T-nuts, and MDT's ACC interior forend weights inside the forend.
What bipod should I run on it?
The full-length ARCA was made for a Ckye-Pod Gen 3, which gives you pan, cant and rapid leg deployment with an ARCA throw lever you can slide anywhere on the rail. If you're carrying the rifle into the backcountry instead, the MDT Mountain Bipod is 5.7 oz of carbon and titanium.
Does Pete's Pillars sell more than chassis?
Yes. We machine our own CZ 457 parts, match barrels, M-LOK weights and pillar bedding here in Michigan, and we run custom Cerakote in house. We also carry chassis from MDT, XLR and Grey Birch, barrels from Lilja and L3i, optics, bipods, and reloading gear like the Area 419 ZERO press.
Small Change. Big Impact. Pete's Pillars.
MDT ACC ELITE CHASSIS SYSTEM | REMINGTON 700 SA | CYAN & BLACK TOPO | 106557-CBL
MDT's Flagship, Finished in Our Shop.
The MDT ACC Elite is the competition chassis MDT built to win with: aircraft-grade 6061 aluminum, a 19″ forend with full-length integrated ARCA, internal and external weight tuning, and a 12.25″ to 14.75″ length of pull. This one wears a Cyan and Black Topo Cerakote finish applied by Pete's Pillars, and it ships with the SRS-X Elite buttstock and Vertical Grip Elite already on it.
At the top of the PRS game the chassis stops being a stock and becomes a tuning platform. The ACC Elite is built for that: a reinforced center section and forend so nothing flexes under a loaded bipod, full-length ARCA so your bipod and bag rider go exactly where the stage wants them, and a weight system that lets you move balance fore and aft until the rifle settles and tracks the way you want. Around 6.10 lbs bare, and it clears barrels up to about 1.35″, so a heavy competition contour fits. Use it for: PRS and NRL Open, team matches, F-Class and benchrest work, night hunting with a clip-on, and any Remington 700 or 700-clone build where the rifle is the serious part of the budget.
Built to Be Tuned.
The 19″ forend carries M-LOK along its length and full-length integrated ARCA underneath, so a bipod clamps anywhere and a rear bag rider moves with the stage instead of staying bolted to one spot. The chassis takes both internal and external MDT weights, which is the part that separates a competition chassis from a nice stock: you can add mass out at the muzzle to calm the reticle, or back toward the action to keep it manageable offhand. Weights are sold separately. It's also drilled and tapped for MDT's Control Bridge and Night Vision Hood systems, and it feeds AICS-pattern magazines.
Fit, and What's Already on It.
Length of pull runs about 12.25″ to 14.75″, with an adjustable cheek riser plus front and rear cheekpiece adjustment and an adjustable buttpad position, so you're setting eye alignment and shoulder contact independently rather than compromising between them. Three things come in the box that you'd otherwise be buying: the MDT SRS-X Elite buttstock, the MDT Vertical Grip Elite with connector bar, and custom-cut grip tape for the forend. Remington 700 pattern, short action, right hand.
Cyan and Black Topo, Done Here.
The topographic pattern in cyan over black is our finish work, not a factory option, and cyan is our color — it's the one running through everything we build. Cerakote is a ceramic-based coating, so it isn't just appearance: it adds abrasion and corrosion resistance to a chassis that's going to get dragged across barricades and rocks. We run custom Cerakote in house with fast in-stock lead times on most builds, in M81 Woodland, Arctic Camo, Snow Camo, Snow White, Robin's Egg Blue and Blaze Orange among others. Want a different pattern or a different color pairing on this chassis? Tell us what you're after.
We'll Match Your Bridges.
This is where a custom finish usually falls apart: you build a chassis in a custom color, then bolt a black bridge onto the top of it. The ACC Elite is drilled and tapped for MDT's Night Vision Bridge and Control Bridge, and we can Cerakote either one to match this Cyan and Black Topo finish so the rifle reads as one piece. Order the bridge with the chassis and let us know, and it comes back finished to match.
Our Take
We Machine the Weights This Chassis Is Built Around
Weight tuning is the whole point of an ACC, and the weights are sold separately. We machine M-LOK exterior forend weights for MDT chassis in a 12.3 oz 2-pack and a 6 oz mini 2-pack, plus machined M-LOK backing T-nuts, all made in the USA right here in Michigan. Run ours on the forend M-LOK and MDT's ACC interior weights inside, and you can move balance in small, repeatable steps instead of guessing.
See our M-LOK Forend Weights →Pair It With
MDT Ckye-Pod Gen 3Clamps anywhere on the full ARCA
Our M-LOK Forend Weights12.3 oz 2-pack, made in USA
MDT 20 MOA Scope BaseRem 700 SA, elevation for distance
Full-Length ARCA, Meet the Ckye-Pod
MDT Ckye-Pod Bipods
The bipod the ACC's ARCA rail was made for. Pan, cant and rapid leg deployment for match stages.
MDTCkye-Pod Gen 3 Double Pull4.6-11.9", pan and cant, ARCA throw lever.Shop Now →
MDTCkye-Pod Gen 3 CompactCompact Gen 3 for PRS and NRL22.Shop Now →
MDTCkye-Pod Gen 3 Compact4.6-11.9" ARCA / Picatinny.Shop Now →
MDTCkye-Pod Gen 3 Single Pull6-15", simpler single-pull legs.Shop Now →
MDTLightweight Ckye-PodRRS BTC double pull, lighter build.Shop Now →
MDTCkye-Pod Gen 2RRS BTC mount, standard legs.Shop Now →
MDTMountain Bipod5.7 oz carbon and titanium, direct ARCA.Shop Now →
MDTBackCountry Bipod7.5-14.3" carbon and titanium.Shop Now →
Build It Out
Bridges, Weights & Match Hardware
Bridges we can Cerakote to match, our machined weights, and the rest of the match setup.
MDTNight Vision Bridge, ACC EliteDrilled and tapped mount for NV. Cerakote to match.Shop Now →
MDTControl Bridge, ACC EliteAdds controls over the action. Cerakote to match.Shop Now →
Made in USAPete's PillarsM-LOK Forend Weights 12.3 ozExterior weights, 2-pack. Fits MDT.Shop Now →
Made in USAPete's PillarsM-LOK Mini Weights 6 ozFiner exterior tuning, 2-pack.Shop Now →
Made in USAPete's PillarsM-LOK Backing T-NutsMachined backing nuts, 2-pack.Shop Now →
MDTACC Interior Forend Weights5-pack of internal balance weights.Shop Now →
MDTM-LOK Adjustable Thumb RestSets thumb position behind the grip.Shop Now →
MDTM-LOK Baker WingsBag-riding wings for positional work.Shop Now →
MDTM-LOK Rear Bag RiderAluminum rider for the rear bag.Shop Now →
MDT20 MOA Picatinny Scope BaseRem 700 short action, 20 MOA.Shop Now →
MDTAICS 10-Round Magazine.308 and 6.5 Creedmoor, polymer.Shop Now →
The Next Level
Add a Bridge. We'll Cerakote It to Match.
- MDT Night Vision Bridge — mounts a clip-on NV unit ahead of the scope on the ACC Elite's drilled and tapped top.
- MDT Control Bridge — puts controls over the action for faster manipulation on the clock.
- Finished in Cyan and Black Topo by us, so the bridge matches the chassis instead of fighting it.
Order the bridge alongside the chassis and tell us to match it. Fast in-stock lead times on most builds.
Did You Know?
Pete's Pillars Sells More Than Pillars.
From centerfire chassis to optics and reloading, outfit every rifle in the safe in one place.
Optics & Mounts
Bipods & Magazines
Product Specifications
Manufacturer: MDT (Modular Driven Technologies)
MPN: 106557-CBL
Chassis Series: ACC Elite Chassis System
Platform: Remington 700 and 700 Clones, Short Action, Right Hand
Finish: Cyan and Black Topo Custom Cerakote by Pete's Pillars
Material: Aircraft-Grade 6061 Aluminum, Reinforced Center Section and Forend
Weight: Approx. 6.10 lbs (Depending on Configuration)
Length of Pull: Approx. 12.25″ to 14.75″
Cheek: Adjustable Riser with Front and Rear Cheekpiece Adjustment
Buttpad: Adjustable Position
Forend: Approx. 19″ with M-LOK; Full-Length Integrated ARCA Rail
Barrel Channel: Max Barrel Diameter Approx. 1.35″
Magazine: AICS Pattern
Weight System: Compatible with MDT Internal and External Weights (Sold Separately)
Bridges: Drilled and Tapped for MDT Control Bridge and Night Vision Hood (Sold Separately)
Includes: MDT SRS-X Elite Buttstock, MDT Vertical Grip Elite with Connector Bar, Custom-Cut Forend Grip Tape
Frequently Asked Questions
Fitment, the Cerakote finish, matching bridges, weights and bipods.
Will it fit my action?
This is the Remington 700 short action, right hand inlet, and it also fits common 700-pattern clones. It takes AICS-pattern magazines and clears barrels up to about 1.35″. Long action or left hand? Ask us and we'll point you at the right ACC.
Who applies the Cyan and Black Topo finish?
We do. The topo pattern in cyan over black is custom Cerakote applied by Pete's Pillars, not a factory MDT color. Cerakote is ceramic based, so along with the look it adds abrasion and corrosion resistance where the chassis takes a beating.
Can you Cerakote a bridge to match?
Yes. The ACC Elite is drilled and tapped for MDT's Night Vision Bridge and Control Bridge, and we'll finish either one in this same Cyan and Black Topo so the rifle matches end to end. Order the bridge with the chassis and tell us to match it. Fast in-stock lead times on most builds.
Can I get a different color or pattern?
We run custom Cerakote in house, including M81 Woodland, Arctic Camo, Snow Camo, Snow White, Robin's Egg Blue and Blaze Orange, with fast in-stock lead times on most builds. If you want a pattern or a color pairing you don't see listed, send us the idea. Prefer a factory finish? See the ACC Elite Rem 700 SA in Titanium Blue.
Are weights included?
No, weights are sold separately, which is normal for an ACC since everyone tunes differently. Use our 12.3 oz M-LOK forend weights or 6 oz mini weights on the exterior with our backing T-nuts, and MDT's ACC interior forend weights inside the forend.
What bipod should I run on it?
The full-length ARCA was made for a Ckye-Pod Gen 3, which gives you pan, cant and rapid leg deployment with an ARCA throw lever you can slide anywhere on the rail. If you're carrying the rifle into the backcountry instead, the MDT Mountain Bipod is 5.7 oz of carbon and titanium.
Does Pete's Pillars sell more than chassis?
Yes. We machine our own CZ 457 parts, match barrels, M-LOK weights and pillar bedding here in Michigan, and we run custom Cerakote in house. We also carry chassis from MDT, XLR and Grey Birch, barrels from Lilja and L3i, optics, bipods, and reloading gear like the Area 419 ZERO press.
Small Change. Big Impact. Pete's Pillars.
| Brand | MDT |
| Gun Platform | Remington 700 (Clones) |
| Action Length | Short Action |
| Type | Chassis |