The Pete’s Pillars Pillar Bedding Set with Epoxy is designed for shooters who want to get the most consistency and repeatability out of their bolt-action rifle. Proper pillar bedding helps eliminate stock compression, maintains consistent action screw torque, and creates a stable interface between the action and stock—key factors in improving accuracy and long-term performance.
This all-in-one set pairs Pete’s Pillars precision aluminum pillars with compatible bedding epoxy to allow the bedding material to form a precise, stress-free fit during installation. The result is a solid mechanical foundation that helps the action return to the same position shot after shot, even as environmental conditions and round counts change.
Including epoxy in the same package simplifies the process and helps save on shipping, making this a practical option for both first-time bedding jobs and experienced installers who want everything ready in one box. The pillars are intentionally left long and trimmed during installation, allowing the final fit to be set precisely for your rifle and stock.
Manufactured in the USA from raw 6061 aluminum, these pillars are installation-ready with a clean, tumbled finish. A quick wipe-down before bedding is all that’s needed prior to installation. Pillars are available in Smooth or Profiled configurations. Profiled pillars feature deep exterior grooves that create a strong mechanical lock with the epoxy, while Smooth pillars offer a clean exterior for installers who prefer a traditional bedding approach.
Fitment & Compatibility
This pillar bedding set is intended for bolt-action rifle platforms and is designed to work with common action screw configurations.
- Nominal outside diameter: 1/2″
- Length: 1.5″ (left long for trimming during installation)
- Action screw compatibility: Fits up to 1/4″ action screws
- Final fitment is achieved during installation for best results
Key Features
- Pete’s Pillars Pillar Bedding Set with Epoxy
- Helps improve consistency, repeatability, and long-term accuracy
- Reduces stock compression and maintains action screw torque
- Convenient all-in-one solution for pillar bedding
- Nominal 1/2″ diameter, 1.5″ trim-to-fit length
- Available in Smooth or Profiled versions
- Deep exterior grooving on Profiled pillars for strong epoxy lock
- Raw 6061 aluminum, installation-ready
- Made in the USA by Pete’s Pillars
Epoxy & Setup Notes
The included epoxy is well suited for pillar installation and provides the bedding compound needed to form a precise interface between the action, pillars, and stock. For customers planning to bed the full action in addition to installing pillars, additional epoxy is available separately to ensure adequate coverage for the entire job.
Pete’s Pillars also offers hardware and SlimLine pillar options separately for select stocks that benefit from reduced material removal.
Installation Notes
Pete’s Pillars products are intended to be installed by a competent gunsmith. DIY installation may be appropriate for individuals with patience, basic tool knowledge, and an understanding of safe and responsible firearm handling. Always ensure firearms are unloaded before installation or handling.
Installation instructions are not included. Many trusted instructional resources are available through FAQs, videos, and community write-ups commonly referenced by experienced builders.
Why Buy from Pete’s Pillars
Pete’s Pillars focuses on bedding components we use and trust ourselves. Our pillar sets with epoxy are built to help shooters create a stable, repeatable bedding foundation—one of the most effective ways to improve real-world rifle performance without unnecessary complexity.
| Gun Brand | Savage |
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
