PETE’S PILLARS | TIKKA T3/T3x | SLIMLINE BEDDING
Keep the Stock You Love. Give It a Better Foundation.
If your Tikka T3/T3x already shoulders and balances the way you like, there’s good reason to keep that stock. The Pete’s Pillars Tikka T3/T3x SlimLine Pillar Kit gives you USA-machined bedding pillars that help keep the action supported where it meets the stock.
Stock material can compress around the action screws. Properly fitted aluminum pillars give those mounting points solid support and help maintain consistent clamping when the action goes back into the stock. That’s the value of bedding a stock you already like shooting: you keep the fit and feel while improving the foundation underneath it.
Made to Save You Time at the Bench
The 6061 aluminum SlimLine pillars come machined with deep exterior grooves that give bedding compound a mechanical grip. A nominal 7/16-inch outside diameter suits stocks with limited room around the action screw locations. The pillars are supplied long for final fitting to your stock, with the exterior profile already machined.
Pair It With
Pair the T3/T3x pillars with the M6 x 1.0 Bedding Helper Hardware Kit to keep the pillars positioned during fitting. Add bedding epoxy on its own, or choose the SlimLine Pillar Kit with Epoxy for both in one package.
Bedding EpoxyBedding compound for your pillar bedding project.WITH EPOXYTikka T3/T3x SlimLine Pillar Kit with EpoxySlimLine pillars and premium bedding epoxy together in one kit.
Key Specifications
Designed for: Tikka T3/T3x stock pillar bedding
Pillar profile: Grooved SlimLine
Material: 6061 aluminum
Outside diameter: Nominal 7/16 inch
Starting length: Approximately 1.5 inches, trim-to-fit
Action screw clearance: Up to 1/4-inch diameter
Kit includes: SlimLine pillar set
Made in: USA
Did You Know? Pete’s Pillars Sells More Than Pillars.
We make our bedding pillars in the USA and carry stocks, chassis and optics-mounting parts for the rest of your Tikka build.
Optics Mounting
Browse Scope Rails & MountsFrequently Asked Questions
Does this kit include bedding epoxy or hardware?
This kit includes the SlimLine pillars only. Epoxy, action screws, and fitting hardware are available separately.
Which Bedding Helper Hardware Kit fits the Tikka T3/T3x?
Choose the M6 x 1.0 Bedding Helper Hardware Kit.
Are the pillars ready to drop into a Tikka T3/T3x stock?
These are trim-to-fit bedding pillars. Final length depends on your stock and setup.
Are installation directions included?
Printed installation directions are not included. See our FAQs and pillar bedding resources for guidance and gunsmith options.
Small Change. Big Impact. Pete’s Pillars.
PETE’S PILLARS | TIKKA T3/T3x | SLIMLINE BEDDING
Keep the Stock You Love. Give It a Better Foundation.
If your Tikka T3/T3x already shoulders and balances the way you like, there’s good reason to keep that stock. The Pete’s Pillars Tikka T3/T3x SlimLine Pillar Kit gives you USA-machined bedding pillars that help keep the action supported where it meets the stock.
Stock material can compress around the action screws. Properly fitted aluminum pillars give those mounting points solid support and help maintain consistent clamping when the action goes back into the stock. That’s the value of bedding a stock you already like shooting: you keep the fit and feel while improving the foundation underneath it.
Made to Save You Time at the Bench
The 6061 aluminum SlimLine pillars come machined with deep exterior grooves that give bedding compound a mechanical grip. A nominal 7/16-inch outside diameter suits stocks with limited room around the action screw locations. The pillars are supplied long for final fitting to your stock, with the exterior profile already machined.
Pair It With
Pair the T3/T3x pillars with the M6 x 1.0 Bedding Helper Hardware Kit to keep the pillars positioned during fitting. Add bedding epoxy on its own, or choose the SlimLine Pillar Kit with Epoxy for both in one package.
Bedding EpoxyBedding compound for your pillar bedding project.WITH EPOXYTikka T3/T3x SlimLine Pillar Kit with EpoxySlimLine pillars and premium bedding epoxy together in one kit.
Key Specifications
Designed for: Tikka T3/T3x stock pillar bedding
Pillar profile: Grooved SlimLine
Material: 6061 aluminum
Outside diameter: Nominal 7/16 inch
Starting length: Approximately 1.5 inches, trim-to-fit
Action screw clearance: Up to 1/4-inch diameter
Kit includes: SlimLine pillar set
Made in: USA
Did You Know? Pete’s Pillars Sells More Than Pillars.
We make our bedding pillars in the USA and carry stocks, chassis and optics-mounting parts for the rest of your Tikka build.
Optics Mounting
Browse Scope Rails & MountsFrequently Asked Questions
Does this kit include bedding epoxy or hardware?
This kit includes the SlimLine pillars only. Epoxy, action screws, and fitting hardware are available separately.
Which Bedding Helper Hardware Kit fits the Tikka T3/T3x?
Choose the M6 x 1.0 Bedding Helper Hardware Kit.
Are the pillars ready to drop into a Tikka T3/T3x stock?
These are trim-to-fit bedding pillars. Final length depends on your stock and setup.
Are installation directions included?
Printed installation directions are not included. See our FAQs and pillar bedding resources for guidance and gunsmith options.
Small Change. Big Impact. Pete’s Pillars.
| Brand | Pete's Pillars |
| Gun Platform | Tikka |
| Gun Brand | Tikka |