Ruger 10/22 Viton Bolt Buffer Pins – 3 Pack
Upgrade the factory bolt buffer in your Ruger 10/22 with a durable, quiet-running alternative from Pete's Pillars.
Each buffer combines a genuine Viton sleeve with a precision stainless steel internal pin to help cushion bolt impact and reduce the mechanical action noise of the 10/22 platform.
This package includes three Ruger 10/22 bolt buffers. They are made and sourced in the USA and are designed as a direct replacement for the factory-style Ruger B46 bolt buffer.
Why Upgrade Your Ruger 10/22 Bolt Buffer?
- Reduces bolt impact against the receiver during cycling.
- Reduces mechanical action noise compared with a rigid factory-style buffer.
- Genuine Viton construction offers excellent resistance to many common oils, solvents and chemicals.
- Stainless steel internal pin provides strength and corrosion resistance.
- Especially useful for suppressed 10/22 builds, where action noise can become more noticeable.
- Made in the USA from USA-sourced components.
Ruger 10/22 & Aftermarket Receiver Compatibility
Designed for the Ruger 10/22 platform and compatible with many receivers using the standard Ruger-style bolt buffer location, including many KIDD and Volquartsen configurations.
Due to normal dimensional differences between factory and aftermarket receivers, buffer fit may vary slightly from one receiver to another.
Looking for additional upgrades? Browse our complete
Ruger 10/22 parts and upgrades
collection.
Installation
- Verify the firearm is completely unloaded.
- Remove the barreled action from the stock according to the manufacturer's instructions.
- Remove the existing bolt buffer.
- Insert the stainless steel pin approximately halfway into the Viton sleeve.
- Install the Viton sleeve through the receiver's bolt-buffer openings.
- Push the stainless steel pin completely through the center of the Viton sleeve.
- Reassemble the firearm and verify proper operation before use.
The stainless steel center pin is intentionally a close fit inside the Viton sleeve once installed.
What's Included
- 3 Viton bolt buffer sleeves
- 3 stainless steel internal pins
Buffers are supplied unassembled to simplify installation.
Complete Your Ruger 10/22 Upgrade
While you're working on your 10/22, these are natural additions to the same build:
See everything available for the platform on our
Ruger 10/22 Parts & Upgrades
page.
Fit & Tolerance Notes
Because receivers and extruded Viton material both have normal manufacturing tolerances, the finished buffer may fit slightly tighter or looser depending on the receiver. The end of the installed buffer may also not appear perfectly square or flush in every action. This is normal and does not affect its intended function.
Not intended for magnum-caliber applications.
Ruger 10/22 Viton Bolt Buffer Pins – 3 Pack
Upgrade the factory bolt buffer in your Ruger 10/22 with a durable, quiet-running alternative from Pete's Pillars.
Each buffer combines a genuine Viton sleeve with a precision stainless steel internal pin to help cushion bolt impact and reduce the mechanical action noise of the 10/22 platform.
This package includes three Ruger 10/22 bolt buffers. They are made and sourced in the USA and are designed as a direct replacement for the factory-style Ruger B46 bolt buffer.
Why Upgrade Your Ruger 10/22 Bolt Buffer?
- Reduces bolt impact against the receiver during cycling.
- Reduces mechanical action noise compared with a rigid factory-style buffer.
- Genuine Viton construction offers excellent resistance to many common oils, solvents and chemicals.
- Stainless steel internal pin provides strength and corrosion resistance.
- Especially useful for suppressed 10/22 builds, where action noise can become more noticeable.
- Made in the USA from USA-sourced components.
Ruger 10/22 & Aftermarket Receiver Compatibility
Designed for the Ruger 10/22 platform and compatible with many receivers using the standard Ruger-style bolt buffer location, including many KIDD and Volquartsen configurations.
Due to normal dimensional differences between factory and aftermarket receivers, buffer fit may vary slightly from one receiver to another.
Looking for additional upgrades? Browse our complete
Ruger 10/22 parts and upgrades
collection.
Installation
- Verify the firearm is completely unloaded.
- Remove the barreled action from the stock according to the manufacturer's instructions.
- Remove the existing bolt buffer.
- Insert the stainless steel pin approximately halfway into the Viton sleeve.
- Install the Viton sleeve through the receiver's bolt-buffer openings.
- Push the stainless steel pin completely through the center of the Viton sleeve.
- Reassemble the firearm and verify proper operation before use.
The stainless steel center pin is intentionally a close fit inside the Viton sleeve once installed.
What's Included
- 3 Viton bolt buffer sleeves
- 3 stainless steel internal pins
Buffers are supplied unassembled to simplify installation.
Complete Your Ruger 10/22 Upgrade
While you're working on your 10/22, these are natural additions to the same build:
See everything available for the platform on our
Ruger 10/22 Parts & Upgrades
page.
Fit & Tolerance Notes
Because receivers and extruded Viton material both have normal manufacturing tolerances, the finished buffer may fit slightly tighter or looser depending on the receiver. The end of the installed buffer may also not appear perfectly square or flush in every action. This is normal and does not affect its intended function.
Not intended for magnum-caliber applications.
