GROVTEC HEAVY DUTY PUSH BUTTON SLING SWIVELS | 1.25″ | 2-PACK
Quick-Detach Sling Hardware That Belongs on a Finished Rifle.
The GrovTec GTSW288 includes two heavy-duty push-button QD sling swivels with 1.25″ loops for standard 1¼″ sling webbing. Steel construction, a nonreflective black manganese phosphate finish and precision-machined locking components make this a straightforward choice for a rifle or chassis already equipped with compatible QD sling sockets.
Use it for: attaching a two-point sling to compatible QD-equipped rifle stocks, chassis and rail accessories; replacing worn or missing push-button swivels; or completing a new sling setup once the correct QD mounting sockets are in place.
A Positive Connection, Without the Complicated Hardware.
Press the central button to release the locking mechanism, seat the swivel in a compatible QD socket, then release the button to secure it. GrovTec makes these swivels to close machining tolerances and reports pull testing exceeding 450 pounds of tension. The matte manganese phosphate finish helps keep the hardware unobtrusive in the field. The sling loop rotates to let the webbing move with you while carrying or transitioning positions.
GTSW288 is a pair of swivels—not a complete sling mounting system. You still need a compatible QD socket at each intended attachment point and a sling with appropriately sized webbing. Always check positive retention before putting the rifle on a sling.
Pair It With: QD-Ready Mounting Options.
Already have QD sling sockets? These swivels may be all you need. If your rifle or chassis needs a mounting point, start with the hardware designed for its particular system. These are separate products, not items included with GTSW288.
Pete’s Pillars Oryx Rear QD WeightReplace the rear Oryx component and gain QD sling cups.
MDT M-LOK QD Sling MountAdd a QD mounting point at a compatible M-LOK location.
MDT M-LOK Weights with QDBalance-tuning weights with QD mounting functionality.
Build Around the Mount You Actually Have.
A QD swivel only does its job when its socket is properly installed and the swivel locks securely. Some chassis have QD cups already; others use M-LOK-mounted QD adapters or accessory rails with integrated sockets. That difference matters more than the brand name on the rifle. The 1.25″ measurement refers to the sling loop width, not the diameter of the QD attachment stud.
More Ways to Finish Your Sling Setup.
Looking for more options? See our chassis accessories, MDT Oryx systems, rifle chassis and rifle stocks. Match the sling attachment arrangement to your actual hardware rather than assuming every stock or chassis has built-in QD cups.
Did You Know? Pete's Pillars Sells More Than Pillars.
From the small pieces that complete a rifle to chassis, barrels and optics, we carry the parts to bring the whole build together.
More from Pete's Pillars
Rifle Barrels →Rifle Triggers →Pillar Bedding Kits →Remington 700 Upgrades →GrovTec GTSW288 Product Specifications
Manufacturer: GrovTec
MPN: GTSW288
Product: Heavy Duty Push Button QD Sling Swivel Set
Package quantity: 2 swivels
Loop width: 1.25″ (for 1¼″ sling webbing)
Material: Steel
Finish: Black, nonreflective manganese phosphate
Attachment: Push-button quick-detach, for compatible QD sling sockets
Manufacturer testing: Pull tested to over 450 pounds of tension
Origin: Made in USA
Your Choice: Sling, QD sockets, rails and adapters sold separately
Frequently Asked Questions
Package contents, sling width, socket compatibility and choosing the right mounting hardware.
How many swivels come in a GTSW288 package?
The GTSW288 includes two GrovTec heavy-duty push-button QD swivels, each with a 1.25″ sling loop. A sling and QD mounting sockets are not included.
Does 1.25″ describe the QD button or the sling loop?
It describes the sling loop width. These swivels accommodate 1¼″ sling webbing. Do not use that measurement to determine whether the QD attachment will fit an individual stock or chassis socket.
Will these work with an MDT Oryx or another rifle chassis?
They can be used with an appropriately sized, compatible QD sling socket. Not every Oryx or other chassis configuration includes the same QD socket arrangement. Verify the actual sockets installed on your rifle and confirm the swivel locks securely before use.
What if my stock has M-LOK slots but no QD sockets?
You need a suitable QD adapter or mount. Our catalog includes the MDT M-LOK QD Sling Mount and other chassis accessories. Choose the mount for your chassis and confirm placement and clearances.
Can I use these with Pete’s Pillars Oryx ARCA rail or rear weight?
The Pete’s Pillars Full-Length Oryx ARCA Rail with QD Cups and Oryx Rear Buttstock Weight with QD Cups provide dedicated QD mounting locations. The GrovTec push-button swivels are a potential match for correctly sized QD cups; confirm the final fit and retention on your own setup.
Does the 450-pound pull test mean I can suspend 450 pounds?
No. GrovTec reports that the swivels were pull tested to more than 450 pounds of tension. That is a product-testing statement, not a working-load rating for an assembled rifle, sling or mounting system. The safe connection depends on the sling, mount, hardware condition and correct installation.
What are they made of, and where are they manufactured?
GTSW288 swivels are steel with a nonreflective black manganese phosphate finish and are made in the USA. Inspect the push-button mechanism and locking engagement before each use. The current Pete’s Pillars listing is marked for domestic US shipping only.
Small Change. Big Impact. Pete's Pillars.
GROVTEC HEAVY DUTY PUSH BUTTON SLING SWIVELS | 1.25″ | 2-PACK
Quick-Detach Sling Hardware That Belongs on a Finished Rifle.
The GrovTec GTSW288 includes two heavy-duty push-button QD sling swivels with 1.25″ loops for standard 1¼″ sling webbing. Steel construction, a nonreflective black manganese phosphate finish and precision-machined locking components make this a straightforward choice for a rifle or chassis already equipped with compatible QD sling sockets.
Use it for: attaching a two-point sling to compatible QD-equipped rifle stocks, chassis and rail accessories; replacing worn or missing push-button swivels; or completing a new sling setup once the correct QD mounting sockets are in place.
A Positive Connection, Without the Complicated Hardware.
Press the central button to release the locking mechanism, seat the swivel in a compatible QD socket, then release the button to secure it. GrovTec makes these swivels to close machining tolerances and reports pull testing exceeding 450 pounds of tension. The matte manganese phosphate finish helps keep the hardware unobtrusive in the field. The sling loop rotates to let the webbing move with you while carrying or transitioning positions.
GTSW288 is a pair of swivels—not a complete sling mounting system. You still need a compatible QD socket at each intended attachment point and a sling with appropriately sized webbing. Always check positive retention before putting the rifle on a sling.
Pair It With: QD-Ready Mounting Options.
Already have QD sling sockets? These swivels may be all you need. If your rifle or chassis needs a mounting point, start with the hardware designed for its particular system. These are separate products, not items included with GTSW288.
Pete’s Pillars Oryx Rear QD WeightReplace the rear Oryx component and gain QD sling cups.
MDT M-LOK QD Sling MountAdd a QD mounting point at a compatible M-LOK location.
MDT M-LOK Weights with QDBalance-tuning weights with QD mounting functionality.
Build Around the Mount You Actually Have.
A QD swivel only does its job when its socket is properly installed and the swivel locks securely. Some chassis have QD cups already; others use M-LOK-mounted QD adapters or accessory rails with integrated sockets. That difference matters more than the brand name on the rifle. The 1.25″ measurement refers to the sling loop width, not the diameter of the QD attachment stud.
More Ways to Finish Your Sling Setup.
Looking for more options? See our chassis accessories, MDT Oryx systems, rifle chassis and rifle stocks. Match the sling attachment arrangement to your actual hardware rather than assuming every stock or chassis has built-in QD cups.
Did You Know? Pete's Pillars Sells More Than Pillars.
From the small pieces that complete a rifle to chassis, barrels and optics, we carry the parts to bring the whole build together.
More from Pete's Pillars
Rifle Barrels →Rifle Triggers →Pillar Bedding Kits →Remington 700 Upgrades →GrovTec GTSW288 Product Specifications
Manufacturer: GrovTec
MPN: GTSW288
Product: Heavy Duty Push Button QD Sling Swivel Set
Package quantity: 2 swivels
Loop width: 1.25″ (for 1¼″ sling webbing)
Material: Steel
Finish: Black, nonreflective manganese phosphate
Attachment: Push-button quick-detach, for compatible QD sling sockets
Manufacturer testing: Pull tested to over 450 pounds of tension
Origin: Made in USA
Your Choice: Sling, QD sockets, rails and adapters sold separately
Frequently Asked Questions
Package contents, sling width, socket compatibility and choosing the right mounting hardware.
How many swivels come in a GTSW288 package?
The GTSW288 includes two GrovTec heavy-duty push-button QD swivels, each with a 1.25″ sling loop. A sling and QD mounting sockets are not included.
Does 1.25″ describe the QD button or the sling loop?
It describes the sling loop width. These swivels accommodate 1¼″ sling webbing. Do not use that measurement to determine whether the QD attachment will fit an individual stock or chassis socket.
Will these work with an MDT Oryx or another rifle chassis?
They can be used with an appropriately sized, compatible QD sling socket. Not every Oryx or other chassis configuration includes the same QD socket arrangement. Verify the actual sockets installed on your rifle and confirm the swivel locks securely before use.
What if my stock has M-LOK slots but no QD sockets?
You need a suitable QD adapter or mount. Our catalog includes the MDT M-LOK QD Sling Mount and other chassis accessories. Choose the mount for your chassis and confirm placement and clearances.
Can I use these with Pete’s Pillars Oryx ARCA rail or rear weight?
The Pete’s Pillars Full-Length Oryx ARCA Rail with QD Cups and Oryx Rear Buttstock Weight with QD Cups provide dedicated QD mounting locations. The GrovTec push-button swivels are a potential match for correctly sized QD cups; confirm the final fit and retention on your own setup.
Does the 450-pound pull test mean I can suspend 450 pounds?
No. GrovTec reports that the swivels were pull tested to more than 450 pounds of tension. That is a product-testing statement, not a working-load rating for an assembled rifle, sling or mounting system. The safe connection depends on the sling, mount, hardware condition and correct installation.
What are they made of, and where are they manufactured?
GTSW288 swivels are steel with a nonreflective black manganese phosphate finish and are made in the USA. Inspect the push-button mechanism and locking engagement before each use. The current Pete’s Pillars listing is marked for domestic US shipping only.
Small Change. Big Impact. Pete's Pillars.
| Brand | GrovTec |
| Type | Sling Swivel |