MDT | TIKKA T3/T3X SHORT ACTION | ACC ELITE
ACC Elite. Tikka Fitment. Flat Dark Earth.
The MDT ACC Elite 106826-FDE is a purpose-built competition chassis for compatible Tikka T3 and T3x short-action rifles. A rigid 6061-aluminum structure, 19″ forend with full-length ARCA, tunable weight placement, and the adjustable SRS-X Elite buttstock support the controlled balance and repeatable positioning competitive shooters demand.
The Elite is designed around the complete rifle, not just the stock. Its long, wide forend accepts support accessories and weights while the included Vertical Grip Elite and thumb rests refine hand placement. The FDE finish pairs with matching ACC Elite top bridges and works equally well with contrasting black hardware. Compare the Tikka Titanium Blue or Tikka Black versions if color is the deciding factor.
This exact SKU is the Tikka T3/T3x short-action inlet, not a Remington 700 or CZ 457 chassis. It is intended for short-action AICS-pattern magazines rather than relying on the factory Tikka magazine system. The ACC Elite is an excellent foundation for PRS and long-range positional competition; select the correct magazine, scope base and caliber-specific accessories separately.
Key Specifications
MPN: 106826-FDE
Fitment: Tikka T3/T3x Short Action
Finish: Flat Dark Earth (FDE)
Construction: Hard-anodized 6061 aluminum with Cerakote finish
Weight: Approx. 6.10 lb (chassis configuration)
Forend: 19″ with full-length integrated ARCA and M-LOK
Length of Pull: 12.25″–14.75″
Magazine: Short-action AICS pattern
Maximum Barrel Diameter: 1.35″
Included: SRS-X Elite buttstock, Vertical Grip Elite with connector bar, two adjustable thumb rests
Pair It With
Three direct ACC Elite accessories worth considering as you set up your Tikka for barricades, balance and a consistent support hand. Accessories are sold separately.
MDT Baker WingsExtra contact and support against barricades
ACC Elite Control Bridge — FDETop-of-forend hand position and mirage management
M-LOK Exterior Weight PairTune mass farther forward with exterior weightsSame Inlet and Other Colorways
Explore ACC Elite Colors & Inlets
Black and Titanium Blue 106826 variants share the Tikka short-action inlet. Hot Pink Spatter, Cyan/Black Topo and M81 Woodland 106557 finishes shown below are Remington 700 SA variants, not Tikka fitments.
MDT · Tikka T3/T3x SAACC Elite Tikka — BlackSame Tikka short-action inlet in blackView Product →
MDT · Tikka T3/T3x SAACC Elite Tikka — Titanium BlueSame Tikka short-action inlet in Titanium BlueView Product →
MDT · Different inletACC Elite 700 SA — Titanium Blue106557-TBL: Remington 700 SA, not TikkaView Product →
MDT · Different inletACC Elite 700 SA — FDERemington 700 short-action version in FDEView Product →
MDT · Different inletACC Elite 700 SA — M81Remington 700 short-action Woodland finishView Product →
MDT · Remington 700 SAACC Elite — Hot Pink Spatter106557-HPS custom finish; Remington 700 SA inlet, not Tikka.View Product →
MDT · Remington 700 SAACC Elite — Cyan/Black Topo106557-CBL custom finish; Remington 700 SA inlet, not Tikka.View Product →
MDT · Different inletACC Elite CZ 457 — FDERimfire CZ 457 configuration, not TikkaView Product →Make the Most of the Chassis
Competition Accessories & Optics
Add a suitable support bipod, top bridge, weight system, or scope-mounting component. Select rings and rails for the actual optic and rifle action.
MDT · Premium bipodCKYE-POD Gen3 Double PullAdjustable bipod for supported stage positionsView Product →
MDT · Premium bipodCKYE-POD Gen2 StandardRRS/BTC-compatible premium bipod optionView Product →
MDT · Competition supportSend iT Gen2 Electronic LevelElectronic level for repeatable positional setupsView Product →
MDT · Matching FDEACC Elite Night Vision Bridge — FDETop rail and mirage-bridge option for the ACC EliteView Product →
MDT · Chassis balancingACC Interior Weight KitAdd internal forend mass for balance tuningView Product →
MDT · Optic mountingMDT Premier 34mm Rings34mm rings; check height against scope and baseView Product →
MDT · Tikka T3 SAMDT Tikka 20 MOA Scope RailMatching Tikka short-action scope-base optionView Product →Other Tikka Build Directions
Tikka T3/T3x Chassis Alternatives
Explore premium and midrange options for the Tikka short-action inlet, from ACC Premier Gen2 to hunting-oriented stocks.
MDT · Tikka T3/T3x SAACC Premier Gen2 Tikka — FDEAlternative competition chassis with a different forend and weight systemView Product →
MDT · Tikka T3/T3x SAACC Premier Gen2 Tikka — BlackAnother Tikka-inlet competition chassis optionView Product →
MDT · Tikka T3 SAMDT XRS Tikka — FDEStock-style ergonomics with a chassis bedding systemView Product →
MDT · Tikka T3/T3x SAMDT Oryx Tikka — FDEStreamlined chassis option for a different budget and handling preferenceView Product →
MDT · Tikka T3/T3x SAMDT Field Stock Tikka — BlackTraditional-stock profile with adjustable fitView Product →
MDT · Tikka T3 SAMDT HNT26 Tikka FoldingLightweight folding hunting alternative to a full competition chassisView Product →Did You Know? Pete’s Pillars Sells More Than Pillars.
We manufacture practical USA-made rifle components and carry premium chassis, barrels and optics for precision builds.
Frequently Asked Questions
Does the ACC Elite 106826-FDE fit Tikka T3 and T3x rifles?
Yes, this configuration is designed for compatible Tikka T3/T3x short-action receivers, including many T3x Lite, CTR, Super Varmint and similar models. It is not the Remington 700, CZ 457 or Tikka long-action inlet. Verify the exact rifle variant before ordering.
Will this Tikka ACC Elite accept factory Tikka magazines?
The ACC Elite Tikka short-action uses short-action AICS-pattern magazines. Do not assume your original factory Tikka detachable magazine fits. Select a magazine compatible with the chassis, your cartridge and the rifle action. Shop rifle magazines.
ACC Elite vs. ACC Premier Gen2: what makes the Elite different?
Both are serious MDT competition chassis. The ACC Elite uses an especially long, wide, rigid competition forend, extensive weight placement options and the SRS-X Elite buttstock and Elite grip system. The ACC Premier Gen2 offers a different balance of features, ergonomics and cost. Compare the ACC Premier Gen2 Tikka FDE before choosing.
Is the ACC Elite better than an XRS, Oryx or Field Stock for PRS competition?
The ACC Elite is purpose-designed for intensive PRS, long-range and positional competition, where its full-length ARCA and large weight-adjustment range matter. The MDT XRS, MDT Oryx and MDT Field Stock suit different priorities and budgets. The best fit depends on how the rifle will be used.
Which ACC Elite colors fit Tikka T3/T3x? Are Hot Pink Spatter, Cyan/Black Topo and M81 available?
This 106826-FDE is for Tikka T3/T3x short action. The 106826 Black and 106826 Titanium Blue pages are Tikka-inlet alternatives. Pete’s Pillars also offers 106557-HPS Hot Pink Spatter, 106557-CBL Cyan/Black Topo, and 106557-M81 Woodland, but all three 106557 products are Remington 700 short-action versions, not compatible Tikka inlets. Match the inlet to your rifle before choosing a finish.
Does the chassis have a built-in ARCA rail and M-LOK slots?
Yes. The 19″ ACC Elite forend incorporates a full-length ARCA mounting surface for compatible bipods, tripods and barricade equipment, with M-LOK accessory support. Check the clamp system of your intended support gear; the CKYE-POD Gen3 is one premium option.
Can I balance an ACC Elite using internal and external weights?
Yes. Weight tuning is a core ACC Elite feature. Compatible interior and M-LOK exterior weights can shift balance around your barrel, optic and support setup. See the interior forend weights and exterior weight pair. Choose components for the ACC Elite geometry and your preferred balance.
What is included with the MDT ACC Elite chassis system?
MDT lists the ACC Elite chassis base, SRS-X Elite buttstock, Vertical Grip Elite with connector bar, and two M-LOK adjustable thumb rests. The rifle action, magazine, optics, bipod, additional weights and optional bridges are separate. Verify the contents when ordering any specialty kit.
How heavy is the ACC Elite and what barrel diameter clears the forend?
MDT lists approximately 6.10 lb for the base chassis configuration, with a 1.35″ maximum barrel diameter and 12.25″–14.75″ adjustable length of pull. Added weight kits, accessories, rifle and optic change the finished rifle weight.
Can I add the MDT Control Bridge, NV Bridge and Baker Wings?
Yes. The ACC Elite forend is designed to accept optional Control Bridge or Night Vision Bridge accessories, and the M-LOK system supports accessories such as Baker Wings. Browse the matching FDE Control Bridge and FDE Night Vision Bridge to build out your preferred setup.
Pete’s Pillars is an authorized MDT dealer.
Small Change. Big Impact. Pete’s Pillars.
MDT | TIKKA T3/T3X SHORT ACTION | ACC ELITE
ACC Elite. Tikka Fitment. Flat Dark Earth.
The MDT ACC Elite 106826-FDE is a purpose-built competition chassis for compatible Tikka T3 and T3x short-action rifles. A rigid 6061-aluminum structure, 19″ forend with full-length ARCA, tunable weight placement, and the adjustable SRS-X Elite buttstock support the controlled balance and repeatable positioning competitive shooters demand.
The Elite is designed around the complete rifle, not just the stock. Its long, wide forend accepts support accessories and weights while the included Vertical Grip Elite and thumb rests refine hand placement. The FDE finish pairs with matching ACC Elite top bridges and works equally well with contrasting black hardware. Compare the Tikka Titanium Blue or Tikka Black versions if color is the deciding factor.
This exact SKU is the Tikka T3/T3x short-action inlet, not a Remington 700 or CZ 457 chassis. It is intended for short-action AICS-pattern magazines rather than relying on the factory Tikka magazine system. The ACC Elite is an excellent foundation for PRS and long-range positional competition; select the correct magazine, scope base and caliber-specific accessories separately.
Key Specifications
MPN: 106826-FDE
Fitment: Tikka T3/T3x Short Action
Finish: Flat Dark Earth (FDE)
Construction: Hard-anodized 6061 aluminum with Cerakote finish
Weight: Approx. 6.10 lb (chassis configuration)
Forend: 19″ with full-length integrated ARCA and M-LOK
Length of Pull: 12.25″–14.75″
Magazine: Short-action AICS pattern
Maximum Barrel Diameter: 1.35″
Included: SRS-X Elite buttstock, Vertical Grip Elite with connector bar, two adjustable thumb rests
Pair It With
Three direct ACC Elite accessories worth considering as you set up your Tikka for barricades, balance and a consistent support hand. Accessories are sold separately.
MDT Baker WingsExtra contact and support against barricadesACC Elite Control Bridge — FDETop-of-forend hand position and mirage managementM-LOK Exterior Weight PairTune mass farther forward with exterior weightsSame Inlet and Other Colorways
Explore ACC Elite Colors & Inlets
Black and Titanium Blue 106826 variants share the Tikka short-action inlet. Hot Pink Spatter, Cyan/Black Topo and M81 Woodland 106557 finishes shown below are Remington 700 SA variants, not Tikka fitments.
MDT · Tikka T3/T3x SAACC Elite Tikka — BlackSame Tikka short-action inlet in blackView Product →MDT · Tikka T3/T3x SAACC Elite Tikka — Titanium BlueSame Tikka short-action inlet in Titanium BlueView Product →MDT · Different inletACC Elite 700 SA — Titanium Blue106557-TBL: Remington 700 SA, not TikkaView Product →MDT · Different inletACC Elite 700 SA — FDERemington 700 short-action version in FDEView Product →MDT · Different inletACC Elite 700 SA — M81Remington 700 short-action Woodland finishView Product →MDT · Remington 700 SAACC Elite — Hot Pink Spatter106557-HPS custom finish; Remington 700 SA inlet, not Tikka.View Product →MDT · Remington 700 SAACC Elite — Cyan/Black Topo106557-CBL custom finish; Remington 700 SA inlet, not Tikka.View Product →MDT · Different inletACC Elite CZ 457 — FDERimfire CZ 457 configuration, not TikkaView Product →Make the Most of the Chassis
Competition Accessories & Optics
Add a suitable support bipod, top bridge, weight system, or scope-mounting component. Select rings and rails for the actual optic and rifle action.
MDT · Premium bipodCKYE-POD Gen3 Double PullAdjustable bipod for supported stage positionsView Product →MDT · Premium bipodCKYE-POD Gen2 StandardRRS/BTC-compatible premium bipod optionView Product →MDT · Competition supportSend iT Gen2 Electronic LevelElectronic level for repeatable positional setupsView Product →MDT · Matching FDEACC Elite Night Vision Bridge — FDETop rail and mirage-bridge option for the ACC EliteView Product →MDT · Chassis balancingACC Interior Weight KitAdd internal forend mass for balance tuningView Product →MDT · Optic mountingMDT Premier 34mm Rings34mm rings; check height against scope and baseView Product →MDT · Tikka T3 SAMDT Tikka 20 MOA Scope RailMatching Tikka short-action scope-base optionView Product →Other Tikka Build Directions
Tikka T3/T3x Chassis Alternatives
Explore premium and midrange options for the Tikka short-action inlet, from ACC Premier Gen2 to hunting-oriented stocks.
MDT · Tikka T3/T3x SAACC Premier Gen2 Tikka — FDEAlternative competition chassis with a different forend and weight systemView Product →MDT · Tikka T3/T3x SAACC Premier Gen2 Tikka — BlackAnother Tikka-inlet competition chassis optionView Product →MDT · Tikka T3 SAMDT XRS Tikka — FDEStock-style ergonomics with a chassis bedding systemView Product →MDT · Tikka T3/T3x SAMDT Oryx Tikka — FDEStreamlined chassis option for a different budget and handling preferenceView Product →MDT · Tikka T3/T3x SAMDT Field Stock Tikka — BlackTraditional-stock profile with adjustable fitView Product →MDT · Tikka T3 SAMDT HNT26 Tikka FoldingLightweight folding hunting alternative to a full competition chassisView Product →Did You Know? Pete’s Pillars Sells More Than Pillars.
We manufacture practical USA-made rifle components and carry premium chassis, barrels and optics for precision builds.
Frequently Asked Questions
Does the ACC Elite 106826-FDE fit Tikka T3 and T3x rifles?
Yes, this configuration is designed for compatible Tikka T3/T3x short-action receivers, including many T3x Lite, CTR, Super Varmint and similar models. It is not the Remington 700, CZ 457 or Tikka long-action inlet. Verify the exact rifle variant before ordering.
Will this Tikka ACC Elite accept factory Tikka magazines?
The ACC Elite Tikka short-action uses short-action AICS-pattern magazines. Do not assume your original factory Tikka detachable magazine fits. Select a magazine compatible with the chassis, your cartridge and the rifle action. Shop rifle magazines.
ACC Elite vs. ACC Premier Gen2: what makes the Elite different?
Both are serious MDT competition chassis. The ACC Elite uses an especially long, wide, rigid competition forend, extensive weight placement options and the SRS-X Elite buttstock and Elite grip system. The ACC Premier Gen2 offers a different balance of features, ergonomics and cost. Compare the ACC Premier Gen2 Tikka FDE before choosing.
Is the ACC Elite better than an XRS, Oryx or Field Stock for PRS competition?
The ACC Elite is purpose-designed for intensive PRS, long-range and positional competition, where its full-length ARCA and large weight-adjustment range matter. The MDT XRS, MDT Oryx and MDT Field Stock suit different priorities and budgets. The best fit depends on how the rifle will be used.
Which ACC Elite colors fit Tikka T3/T3x? Are Hot Pink Spatter, Cyan/Black Topo and M81 available?
This 106826-FDE is for Tikka T3/T3x short action. The 106826 Black and 106826 Titanium Blue pages are Tikka-inlet alternatives. Pete’s Pillars also offers 106557-HPS Hot Pink Spatter, 106557-CBL Cyan/Black Topo, and 106557-M81 Woodland, but all three 106557 products are Remington 700 short-action versions, not compatible Tikka inlets. Match the inlet to your rifle before choosing a finish.
Does the chassis have a built-in ARCA rail and M-LOK slots?
Yes. The 19″ ACC Elite forend incorporates a full-length ARCA mounting surface for compatible bipods, tripods and barricade equipment, with M-LOK accessory support. Check the clamp system of your intended support gear; the CKYE-POD Gen3 is one premium option.
Can I balance an ACC Elite using internal and external weights?
Yes. Weight tuning is a core ACC Elite feature. Compatible interior and M-LOK exterior weights can shift balance around your barrel, optic and support setup. See the interior forend weights and exterior weight pair. Choose components for the ACC Elite geometry and your preferred balance.
What is included with the MDT ACC Elite chassis system?
MDT lists the ACC Elite chassis base, SRS-X Elite buttstock, Vertical Grip Elite with connector bar, and two M-LOK adjustable thumb rests. The rifle action, magazine, optics, bipod, additional weights and optional bridges are separate. Verify the contents when ordering any specialty kit.
How heavy is the ACC Elite and what barrel diameter clears the forend?
MDT lists approximately 6.10 lb for the base chassis configuration, with a 1.35″ maximum barrel diameter and 12.25″–14.75″ adjustable length of pull. Added weight kits, accessories, rifle and optic change the finished rifle weight.
Can I add the MDT Control Bridge, NV Bridge and Baker Wings?
Yes. The ACC Elite forend is designed to accept optional Control Bridge or Night Vision Bridge accessories, and the M-LOK system supports accessories such as Baker Wings. Browse the matching FDE Control Bridge and FDE Night Vision Bridge to build out your preferred setup.
Pete’s Pillars is an authorized MDT dealer.
Small Change. Big Impact. Pete’s Pillars.
| Brand | MDT |
| Gun Platform | Tikka |
| Hand | Right Hand |
| Chassis Series | ACC Elite |