Beyer Barrels Ruger 1022 4.5" Ultralight Fluted Target 10/22 Charger Barrel Silver
Beyer
Explore Beyer ProductsBEYER BARRELS | RUGER 10/22 CHARGER | .22 LR
Four and a Half Inches. Just About Four and a Half Ounces.
The Beyer 4.5-inch Ultralight Fluted Charger Barrel puts a full .920-inch target contour into a genuinely compact package. The silver fluted exterior gives the Charger a custom look, while the steel-lined bore and machined aluminum body keep barrel weight to approximately 4.5 oz. It is a distinctively light way to finish a short .22 LR pistol setup.
Short barrels leave little room to hide unnecessary weight. Beyer takes advantage of that with a 7075 aluminum barrel body surrounding a rifled steel liner, so this Charger barrel has the look and diameter of a traditional target barrel without carrying the same mass. The fluting adds dimension to the silver finish, and the recessed target crown and Beyer match chamber complete a barrel made for someone who cares about more than factory appearance.
This is the 4.5-inch .22 LR version for standard fixed-barrel Ruger 10/22 Charger configurations. The 1:16 twist and 1/2-28 threaded muzzle round out the specification. A thread protector is included according to our product listing. If your build uses a Takedown barrel interface, this is not that version.
Made for a Compact Charger
On a short Charger, the barrel is a major part of the balance and the overall look. Beyer’s aluminum-and-steel construction gives you the substantial .920-inch profile of a target barrel without putting a heavy steel tube at the front. For a compact range pistol with a red dot, that combination is the reason to look at Beyer rather than shopping by barrel length alone.
Considering a Volquartsen Charger Barrel?
A short Charger does not have to mean a heavy barrel. If you want a different take on a compact, lightweight build, compare this 4.5-inch Beyer with the Volquartsen VF-6 and Volquartsen VF-9. Both use Volquartsen’s carbon-fiber barrel construction, with 6-inch and 9-inch lengths respectively. For more parts and options around the platform, explore our Ruger Charger catalog.
Pair It With
Pete’s Pillars makes the smaller 10/22 parts that are easy to overlook when choosing a premium barrel. Our Viton buffer and stainless trigger-pin kit addresses two familiar action contact points, while our stainless V-block screws and magazine-play adjustment screws are useful items to consider for the rest of your Charger.
Pete’s Pillars P7643-BLKViton bolt buffer and stainless trigger pins.
Pete’s Pillars V-Block ScrewsUSA-machined stainless barrel-retention hardware.
Magazine Adjustment ScrewsPete’s Pillars hardware for rotary-magazine fit.FINISH YOUR CHARGER
Triggers, Complete Bolts and Control
A good barrel deserves a trigger you enjoy using. The silver Volquartsen TG2000 complements this finish, while the Ruger BX Trigger provides a different price point. Complete Volquartsen bolts and the Rapid Release trigger option are also worth comparing as separate upgrades.
VolquartsenTG2000 Trigger – SilverPremium complete trigger assembly in silver.View Product →
VolquartsenTG2000 Rapid Release – SilverSilver TG2000 with the Rapid Release control layout.View Product →
VolquartsenTG2000 Trigger – BlackSame premium trigger family in a darker finish.View Product →
RugerBX Trigger AssemblyPopular factory upgrade for 10/22 and Charger.View Product →
VolquartsenCompetition Bolt Assembly – BlackComplete premium bolt assembly for the 10/22 family.View Product →
VolquartsenCompetition Bolt Assembly – GoldAn alternate premium bolt assembly finish.View Product →The difference between the silver TG2000 and the Silver Rapid Release model is more than appearance: they have different magazine-control arrangements. Choose the one you want to use. The black TG2000 and Ruger BX are alternatives, not parts you need in addition to a complete TG2000 assembly.
OPTICS & MAGAZINES
Get the Sighting Setup and Magazine You Want
A compact .22 LR Charger and a red dot make an appealing range combination. The Midwest Industries 10/22 rail and Athlon Midas TSR2 are separate optic options, while Ruger’s factory magazines let you choose the capacity and format that suit your use and local requirements.
Midwest Industries10/22 Picatinny Scope RailReceiver optic-mounting option for standard 10/22.View Product →
AthlonMidas TSR2 Red DotCompact sight option for a receiver-mounted rail.View Product →
RugerBX 10-Round MagazineGenuine Ruger rotary magazine.View Product →
RugerBX-15 MagazineFactory Ruger 15-round option where lawful.View Product →
RugerBX-25 MagazineFactory Ruger extended magazine where lawful.View Product →
TANDEMKROSSSpartan Charging Handle – SilverSilver accent with a different handle profile.View Product →The barrel itself does not provide an optic mounting surface. If your Charger receiver already has a suitable rail, you may only need the sight. For magazines, the BX-10, BX-15 and BX-25 share the familiar Ruger 10/22 magazine family; availability and permitted capacity depend on location.
Key Specifications
Brand: Beyer Barrels
Platform: Standard fixed-barrel Ruger 10/22 Charger
Caliber: .22 LR
Barrel length: 4.5 inches
Barrel profile: .920-inch target contour, fluted
Finish: Silver
Construction: Precision-machined 7075 aluminum body with a rifled steel bore liner
Twist rate: 1:16
Chamber: Beyer match chamber
Muzzle: 1/2-28 threaded, recessed target crown
Weight: Approximately 4.5 oz
Included: Thread protector, as listed
Small Change. Big Impact. Pete’s Pillars.
We manufacture practical American-made Ruger 10/22 parts and stock established rimfire brands for a complete shooting setup.
Frequently Asked Questions
Is this Beyer barrel for the standard Charger or the 10/22 Takedown?
This listing is for the standard fixed-barrel 10/22 Charger configuration, not the separate Ruger 10/22 Takedown attachment system.
What caliber, length and twist does the Silver fluted barrel have?
It is a 4.5-inch .22 LR barrel with 1:16 rifling twist and a .920-inch fluted target profile.
How can a .920-inch target-profile barrel weigh so little?
Beyer uses a machined 7075 aluminum body around a rifled steel liner. Our listing gives the weight at approximately 4.5 ounces, rather than the much higher weight of a comparable solid-steel barrel.
Does the muzzle have 1/2-28 threads and a protector?
Yes. Our barrel listing specifies 1/2-28 muzzle threads and a thread protector. Accessories are separate and must be compatible with the barrel and intended use.
Does the barrel have a steel bore and a target crown?
Yes. The ultralight construction pairs a steel rifled liner with a recessed target crown and Beyer match chamber.
Will every Ruger 10/22 receiver accept it without fitting?
Beyer manufactures the barrel shank with a close, slightly oversized fit. Some receiver combinations may require professional fitting; do not assume identical fit across aftermarket receivers.
Are sights, a receiver rail or a trigger included?
The barrel is sold as a barrel, not a complete Charger upper assembly. Optic mounts, sights, triggers and complete bolts are separate. See the Midwest Industries rail and Volquartsen TG2000 Silver for relevant options.
How does this 4.5-inch Beyer compare with Volquartsen VF-6 and VF-9 barrels?
The Beyer emphasizes a compact 4.5-inch aluminum-and-steel construction. The Volquartsen VF-6 is a 6-inch carbon-fiber alternative, while the VF-9 offers a 9-inch carbon-fiber configuration. Choose based on your desired length, balance, and standard Charger fitment.
Can I put a 4.5-inch barrel on a regular 10/22 rifle?
A 4.5-inch barrel is a short Charger/pistol configuration, not an ordinary rifle-length replacement. Federal, state and local firearm-classification rules matter; confirm that your particular firearm configuration is lawful before choosing a short barrel.
Which Pete’s Pillars components pair with this barrel?
The P7643-BLK Viton buffer and stainless trigger-pin kit, stainless V-block screws and rotary-magazine adjustment screws are separate American-made components for other 10/22 action hardware needs.
Pete’s Pillars is a retailer of Beyer Barrels products and manufactures complementary Ruger 10/22 small parts.
Small Change. Big Impact. Pete’s Pillars.
BEYER BARRELS | RUGER 10/22 CHARGER | .22 LR
Four and a Half Inches. Just About Four and a Half Ounces.
The Beyer 4.5-inch Ultralight Fluted Charger Barrel puts a full .920-inch target contour into a genuinely compact package. The silver fluted exterior gives the Charger a custom look, while the steel-lined bore and machined aluminum body keep barrel weight to approximately 4.5 oz. It is a distinctively light way to finish a short .22 LR pistol setup.
Short barrels leave little room to hide unnecessary weight. Beyer takes advantage of that with a 7075 aluminum barrel body surrounding a rifled steel liner, so this Charger barrel has the look and diameter of a traditional target barrel without carrying the same mass. The fluting adds dimension to the silver finish, and the recessed target crown and Beyer match chamber complete a barrel made for someone who cares about more than factory appearance.
This is the 4.5-inch .22 LR version for standard fixed-barrel Ruger 10/22 Charger configurations. The 1:16 twist and 1/2-28 threaded muzzle round out the specification. A thread protector is included according to our product listing. If your build uses a Takedown barrel interface, this is not that version.
Made for a Compact Charger
On a short Charger, the barrel is a major part of the balance and the overall look. Beyer’s aluminum-and-steel construction gives you the substantial .920-inch profile of a target barrel without putting a heavy steel tube at the front. For a compact range pistol with a red dot, that combination is the reason to look at Beyer rather than shopping by barrel length alone.
Considering a Volquartsen Charger Barrel?
A short Charger does not have to mean a heavy barrel. If you want a different take on a compact, lightweight build, compare this 4.5-inch Beyer with the Volquartsen VF-6 and Volquartsen VF-9. Both use Volquartsen’s carbon-fiber barrel construction, with 6-inch and 9-inch lengths respectively. For more parts and options around the platform, explore our Ruger Charger catalog.
Pair It With
Pete’s Pillars makes the smaller 10/22 parts that are easy to overlook when choosing a premium barrel. Our Viton buffer and stainless trigger-pin kit addresses two familiar action contact points, while our stainless V-block screws and magazine-play adjustment screws are useful items to consider for the rest of your Charger.
Pete’s Pillars P7643-BLKViton bolt buffer and stainless trigger pins.Pete’s Pillars V-Block ScrewsUSA-machined stainless barrel-retention hardware.Magazine Adjustment ScrewsPete’s Pillars hardware for rotary-magazine fit.FINISH YOUR CHARGER
Triggers, Complete Bolts and Control
A good barrel deserves a trigger you enjoy using. The silver Volquartsen TG2000 complements this finish, while the Ruger BX Trigger provides a different price point. Complete Volquartsen bolts and the Rapid Release trigger option are also worth comparing as separate upgrades.
VolquartsenTG2000 Trigger – SilverPremium complete trigger assembly in silver.View Product →VolquartsenTG2000 Rapid Release – SilverSilver TG2000 with the Rapid Release control layout.View Product →VolquartsenTG2000 Trigger – BlackSame premium trigger family in a darker finish.View Product →RugerBX Trigger AssemblyPopular factory upgrade for 10/22 and Charger.View Product →VolquartsenCompetition Bolt Assembly – BlackComplete premium bolt assembly for the 10/22 family.View Product →VolquartsenCompetition Bolt Assembly – GoldAn alternate premium bolt assembly finish.View Product →The difference between the silver TG2000 and the Silver Rapid Release model is more than appearance: they have different magazine-control arrangements. Choose the one you want to use. The black TG2000 and Ruger BX are alternatives, not parts you need in addition to a complete TG2000 assembly.
OPTICS & MAGAZINES
Get the Sighting Setup and Magazine You Want
A compact .22 LR Charger and a red dot make an appealing range combination. The Midwest Industries 10/22 rail and Athlon Midas TSR2 are separate optic options, while Ruger’s factory magazines let you choose the capacity and format that suit your use and local requirements.
Midwest Industries10/22 Picatinny Scope RailReceiver optic-mounting option for standard 10/22.View Product →AthlonMidas TSR2 Red DotCompact sight option for a receiver-mounted rail.View Product →RugerBX 10-Round MagazineGenuine Ruger rotary magazine.View Product →RugerBX-15 MagazineFactory Ruger 15-round option where lawful.View Product →RugerBX-25 MagazineFactory Ruger extended magazine where lawful.View Product →TANDEMKROSSSpartan Charging Handle – SilverSilver accent with a different handle profile.View Product →The barrel itself does not provide an optic mounting surface. If your Charger receiver already has a suitable rail, you may only need the sight. For magazines, the BX-10, BX-15 and BX-25 share the familiar Ruger 10/22 magazine family; availability and permitted capacity depend on location.
Key Specifications
Brand: Beyer Barrels
Platform: Standard fixed-barrel Ruger 10/22 Charger
Caliber: .22 LR
Barrel length: 4.5 inches
Barrel profile: .920-inch target contour, fluted
Finish: Silver
Construction: Precision-machined 7075 aluminum body with a rifled steel bore liner
Twist rate: 1:16
Chamber: Beyer match chamber
Muzzle: 1/2-28 threaded, recessed target crown
Weight: Approximately 4.5 oz
Included: Thread protector, as listed
Small Change. Big Impact. Pete’s Pillars.
We manufacture practical American-made Ruger 10/22 parts and stock established rimfire brands for a complete shooting setup.
Frequently Asked Questions
Is this Beyer barrel for the standard Charger or the 10/22 Takedown?
This listing is for the standard fixed-barrel 10/22 Charger configuration, not the separate Ruger 10/22 Takedown attachment system.
What caliber, length and twist does the Silver fluted barrel have?
It is a 4.5-inch .22 LR barrel with 1:16 rifling twist and a .920-inch fluted target profile.
How can a .920-inch target-profile barrel weigh so little?
Beyer uses a machined 7075 aluminum body around a rifled steel liner. Our listing gives the weight at approximately 4.5 ounces, rather than the much higher weight of a comparable solid-steel barrel.
Does the muzzle have 1/2-28 threads and a protector?
Yes. Our barrel listing specifies 1/2-28 muzzle threads and a thread protector. Accessories are separate and must be compatible with the barrel and intended use.
Does the barrel have a steel bore and a target crown?
Yes. The ultralight construction pairs a steel rifled liner with a recessed target crown and Beyer match chamber.
Will every Ruger 10/22 receiver accept it without fitting?
Beyer manufactures the barrel shank with a close, slightly oversized fit. Some receiver combinations may require professional fitting; do not assume identical fit across aftermarket receivers.
Are sights, a receiver rail or a trigger included?
The barrel is sold as a barrel, not a complete Charger upper assembly. Optic mounts, sights, triggers and complete bolts are separate. See the Midwest Industries rail and Volquartsen TG2000 Silver for relevant options.
How does this 4.5-inch Beyer compare with Volquartsen VF-6 and VF-9 barrels?
The Beyer emphasizes a compact 4.5-inch aluminum-and-steel construction. The Volquartsen VF-6 is a 6-inch carbon-fiber alternative, while the VF-9 offers a 9-inch carbon-fiber configuration. Choose based on your desired length, balance, and standard Charger fitment.
Can I put a 4.5-inch barrel on a regular 10/22 rifle?
A 4.5-inch barrel is a short Charger/pistol configuration, not an ordinary rifle-length replacement. Federal, state and local firearm-classification rules matter; confirm that your particular firearm configuration is lawful before choosing a short barrel.
Which Pete’s Pillars components pair with this barrel?
The P7643-BLK Viton buffer and stainless trigger-pin kit, stainless V-block screws and rotary-magazine adjustment screws are separate American-made components for other 10/22 action hardware needs.
Pete’s Pillars is a retailer of Beyer Barrels products and manufactures complementary Ruger 10/22 small parts.
Small Change. Big Impact. Pete’s Pillars.
| Brand | Beyer |
| Gun Platform | 10/22 |
| Barrel Length | 4.5" |
| Caliber | .22 LR |