- Shop
- Lilja CZ 457 .22 LR 26" .900 Straight Taper Bull Barrel 1:16 Stainless E53726
Lilja CZ 457 .22 LR 26" .900 Straight Taper Bull Barrel 1:16 Stainless E53726
https://www.petespillars.com/shop/e53726-lilja-cz-457-22-lr-26-900-straight-taper-bull-barrel-1-16-stainless-e53726-35761 https://www.petespillars.com/web/image/product.template/35761/image_1920?unique=944cab4LILJA | CZ 455 / CZ 457 MATCH BARRELS | AUTHORIZED DEALER
The Barrel Serious Rimfire Shooters Work Their Way Up To.
Dan Lilja has been cutting and hand-lapping barrels in Plains, Montana since 1985, and the people who shoot them do not go looking for something else. This is the 26-inch .900 straight-taper bull in .22 LR for the CZ 455 and CZ 457: 416 stainless, three-groove rifling, a bore lapped by hand one barrel at a time, and a target crown. If you have taken a CZ as far as a good trigger and a solid chassis will take it, this is the part that was always going to be next.
.22 LR · 416 Stainless · 1:16 Twist · 3-Groove · Hand-Lapped · Lilja 3 Match Chamber
The .900 straight taper is the one most CZ shooters land on. At 26 inches it puts real mass out front where it settles the rifle and flattens your hold, without committing you to the sheer bulk of Lilja's 1.00 or 1.180 contours. What you are paying for lives on the inside: three-groove rifling, a 1:16 twist, and a bore that is hand-lapped individually rather than run through a process and signed off. Lilja builds every barrel that way. There is no premium line and a lesser one.
We are happy to have our name next to Lilja's. Two small American shops, both machining to a standard instead of to a price, both building for the same CZ rimfire crowd. We have spent years making parts for these rifles and we know what the people buying this barrel are chasing, which is why it sits alongside our own match barrels rather than in place of them. One practical note before you order: this is a true .900 contour, so make sure your stock or chassis has the barrel channel for it, and follow Lilja's headspace and installation guidance when it goes together.
Montana barrels. Michigan parts. One very good CZ.
Product Specifications
Pair It With
A barrel swap means the action is on the bench anyway, so here are three of our own parts worth doing in the same sitting: our stainless PP457-48 barrel set screws for CZ 455 / 457, plus a reshaped-tip firing pin and extended stainless cocking indicator for the CZ 457. Each sold separately; check fitment for your rifle.
The Next Level · MDT
Give It Something Worth Bolting Into.
- The MDT ACC Premier Gen2 CZ 457 is a purpose-built rimfire inlet on a full ARCA competition platform.
- Balance the rifle around the barrel deliberately, instead of hanging weight on it and hoping.
- A barrel this good deserves a stock that holds it the same way every time.
- Confirm clearance for the full .900 contour before ordering.
Finish the Rifle
Build the Rest of It to Match
Chassis, support, balance and the small CZ 457 parts we machine ourselves. Everything here is chosen for a rifle built around a barrel like this one.
Want More Barrel Out Front?
Same platform, same standard of work, heavier contour. Pick the weight and balance you want to shoot behind.
Frequently Asked Questions
Fitment, contour selection, Lilja chamber details and installation considerations.
Will this Lilja fit both the CZ 455 and CZ 457?
Yes, both. It is built for the CZ 455 and CZ 457 in .22 LR. The only thing to check first is barrel channel clearance for the full .900 contour in your stock or chassis, then follow Lilja's installation and headspace guidance when it goes in.
What chamber, rifling and twist does it use?
The barrel features a Lilja 3 .22 LR match chamber, three-groove rifling, a 1:16 twist and an individually hand-lapped bore.
Is the muzzle threaded?
Not on this configuration. It comes with a target crown cut by Lilja, which is what you want when the barrel is going to be shot bare.
Does it include a headspace shim kit?
Yes. Lilja includes their headspace shim kit, so you have what you need to set it correctly. Follow their guidance and verify headspace as it goes together.
Which alternative has a heavier contour?
The Pete's Pillars 26-inch .960 and Lilja 26-inch 1.00 both have larger contour diameters than this .900. For a much larger profile, consider the Lilja 24-inch 1.180. Always confirm barrel-channel clearance.
Will the CZ 457 accessories here fit my CZ 455?
Not all of them. The PP457-48 barrel screws are listed for both CZ 455 and CZ 457. The featured firing pin and 15 MOA scope rail are CZ 457-specific.
Will the barrel clear an MDT competition chassis?
Chassis fitment depends on the exact inlet and barrel channel. The featured MDT ACC Premier Gen2 is a CZ 457 chassis; confirm clearance for this barrel's .900-inch contour before purchasing.
Does the Lilja barrel guarantee a particular group size?
Nobody can promise you a number, and we are not going to start. What a Lilja gives you is a barrel that is no longer the limiting factor. From there it comes down to the ammunition your rifle likes, how carefully it is installed and headspaced, and the conditions on the day. That is the right problem to have.
Pete's Pillars. Small Change. Big Impact.
LILJA | CZ 455 / CZ 457 MATCH BARRELS | AUTHORIZED DEALER
The Barrel Serious Rimfire Shooters Work Their Way Up To.
Dan Lilja has been cutting and hand-lapping barrels in Plains, Montana since 1985, and the people who shoot them do not go looking for something else. This is the 26-inch .900 straight-taper bull in .22 LR for the CZ 455 and CZ 457: 416 stainless, three-groove rifling, a bore lapped by hand one barrel at a time, and a target crown. If you have taken a CZ as far as a good trigger and a solid chassis will take it, this is the part that was always going to be next.
.22 LR · 416 Stainless · 1:16 Twist · 3-Groove · Hand-Lapped · Lilja 3 Match Chamber
The .900 straight taper is the one most CZ shooters land on. At 26 inches it puts real mass out front where it settles the rifle and flattens your hold, without committing you to the sheer bulk of Lilja's 1.00 or 1.180 contours. What you are paying for lives on the inside: three-groove rifling, a 1:16 twist, and a bore that is hand-lapped individually rather than run through a process and signed off. Lilja builds every barrel that way. There is no premium line and a lesser one.
We are happy to have our name next to Lilja's. Two small American shops, both machining to a standard instead of to a price, both building for the same CZ rimfire crowd. We have spent years making parts for these rifles and we know what the people buying this barrel are chasing, which is why it sits alongside our own match barrels rather than in place of them. One practical note before you order: this is a true .900 contour, so make sure your stock or chassis has the barrel channel for it, and follow Lilja's headspace and installation guidance when it goes together.
Montana barrels. Michigan parts. One very good CZ.
Product Specifications
Pair It With
A barrel swap means the action is on the bench anyway, so here are three of our own parts worth doing in the same sitting: our stainless PP457-48 barrel set screws for CZ 455 / 457, plus a reshaped-tip firing pin and extended stainless cocking indicator for the CZ 457. Each sold separately; check fitment for your rifle.
The Next Level · MDT
Give It Something Worth Bolting Into.
- The MDT ACC Premier Gen2 CZ 457 is a purpose-built rimfire inlet on a full ARCA competition platform.
- Balance the rifle around the barrel deliberately, instead of hanging weight on it and hoping.
- A barrel this good deserves a stock that holds it the same way every time.
- Confirm clearance for the full .900 contour before ordering.
Finish the Rifle
Build the Rest of It to Match
Chassis, support, balance and the small CZ 457 parts we machine ourselves. Everything here is chosen for a rifle built around a barrel like this one.
Want More Barrel Out Front?
Same platform, same standard of work, heavier contour. Pick the weight and balance you want to shoot behind.
Frequently Asked Questions
Fitment, contour selection, Lilja chamber details and installation considerations.
Will this Lilja fit both the CZ 455 and CZ 457?
Yes, both. It is built for the CZ 455 and CZ 457 in .22 LR. The only thing to check first is barrel channel clearance for the full .900 contour in your stock or chassis, then follow Lilja's installation and headspace guidance when it goes in.
What chamber, rifling and twist does it use?
The barrel features a Lilja 3 .22 LR match chamber, three-groove rifling, a 1:16 twist and an individually hand-lapped bore.
Is the muzzle threaded?
Not on this configuration. It comes with a target crown cut by Lilja, which is what you want when the barrel is going to be shot bare.
Does it include a headspace shim kit?
Yes. Lilja includes their headspace shim kit, so you have what you need to set it correctly. Follow their guidance and verify headspace as it goes together.
Which alternative has a heavier contour?
The Pete's Pillars 26-inch .960 and Lilja 26-inch 1.00 both have larger contour diameters than this .900. For a much larger profile, consider the Lilja 24-inch 1.180. Always confirm barrel-channel clearance.
Will the CZ 457 accessories here fit my CZ 455?
Not all of them. The PP457-48 barrel screws are listed for both CZ 455 and CZ 457. The featured firing pin and 15 MOA scope rail are CZ 457-specific.
Will the barrel clear an MDT competition chassis?
Chassis fitment depends on the exact inlet and barrel channel. The featured MDT ACC Premier Gen2 is a CZ 457 chassis; confirm clearance for this barrel's .900-inch contour before purchasing.
Does the Lilja barrel guarantee a particular group size?
Nobody can promise you a number, and we are not going to start. What a Lilja gives you is a barrel that is no longer the limiting factor. From there it comes down to the ammunition your rifle likes, how carefully it is installed and headspaced, and the conditions on the day. That is the right problem to have.
Pete's Pillars. Small Change. Big Impact.
| Brand | Lilja |
| Gun Platform | CZ 457 |