CZ 457 Profiled Pillar Bedding DELUXE KIT with Devcon and STAINLESS Action Screws

Price:

40.99


Test
Test
1.00
1.00
Warne 20MOA, Extended Skeletonized 30mm MSR Mount, Black LRSKEL30TW
Warne 20MOA, Extended Skeletonized 30mm MSR Mount, Black LRSKEL30TW
144.99
144.99

CZ 457 Profiled Pillar Bedding DELUXE KIT with Devcon and STAINLESS Action Screws

https://www.petespillars.com/web/image/product.template/18047/image_1920?unique=81a3b73
(0 review)

40.99 40.99 USD 40.99

40.99

Not Available For Sale


  • Brand
  • Gun Platform
  • For Gun Type
  • Gun Brand

This combination does not exist.


Authorized Dealer!
Lowest Price Online!
*Orders ship within 1-3 business days!

This is the  DELUXE PILLAR BEDDING KIT FOR THE CZ 457. It will fit the 22LR, The 22 WMR, and .17HMR. It comes with STAINLESS STEEL actions screw and STAINLESS STEEL threaded rod to assist with cutting pillar length. THIS KIT ALSO COMES WITH DEVCON PLASTIC STEEL EPOXY.

These are pillars and the stainless steel action screw kit for a CZ 457 Stock.

Please note: action screws maybe threaded fully or partially threaded depending on inventory on hand. It does not affect performance or function One Way or Another.

Pillar installation assists in accuracy as it prevents crushing of the stock and prevent stress cracks. Pillars also keep the action from twisting or moving. Consistency is key in accuracy.

The pillars are 1/2'' (.4995) in diameter, CNC machined, and made of T6 6061 aluminum. These pillars are left

long so that they can be trimmed to length by the installer, depending on the specific stock that you have. If the pillars are cut too short they will not do their job. The threaded rod is used to assist in placing the pillars and cutting to them to length.

This a DIY kit. In order to utilize this kit you must drill out the stock, and "glue" these into place. Final fit and finish will need to be done during installation. A chamfer may be required on the bottom inner diameter of the pillars to allow for action screw fitment. A drill press is recommended but it can be done by a steady hand. Simply scuff up the exterior with some sand paper prior to installation and be sure to degrease.

These can be installed in manners, factory, HS Precision, Boyd's, and McMillian stocks.

I also have Upgraded Action Screws and kit for the cz 455 457, and pillars and screws by themselves.

These will only fit the CZ 455 because of the notch for the magazine well. I have other pillars that will fit other actions such as the Remington 700 and mosin nagant.

May fit other rifles that are rimfire, such as ruger, 10/22, savage, anshutz, winchester and the like but I cannot be certain.

Please ask any and all questions before buying. I am not a business or a dealer. I simply sell stuff on the side that I do not need. I conduct all business with respect, and try to be professional. I appreciate the same. If something happens please offer a little grace and understanding and contact me about. As a small seller, I work hard to earn good feedback ratings.


Brand Pete's Pillars
Gun Platform CZ 457
For Gun Type Rifle
Gun Brand CZ
Accessory Products

To install this Web App in your iPhone/iPad press and then Add to Home Screen.