MDT ACC Premier Gen2Balance It. Build It. Compete.
A serious competition chassis without the full ACC Elite investment. The Premier Gen2 combines an integrated ARCA forend, adjustable shooter fit and a versatile weight system so your rifle settles where you need it.
From CZ 457 precision rimfire to centerfire PRS builds, the ACC Premier Gen2 gives you a competition-ready foundation with room to refine it as you shoot.
ACC Premier Gen2 · Remington 700 SA · Black
A Competition Chassis With a Purpose.
The Premier Gen2 is more than an updated ACC. MDT brought over key ideas from the Elite: a thicker, more rigid forend, taller integrated barricade stop and bridge mounting points. Its compact 15-inch forend suits both centerfire and growing rimfire competition builds.
Built for Barricades
A wide, flat-bottomed aluminum forend and tall barricade stop give the rifle a consistent interface for bags and supported positions.
ARCA From Day One
A full-length integrated ARCA/RRS dovetail allows compatible bipods and tripod clamps to move where the stage or position demands.
Fine-Tune the Balance
Use internal weights, exterior M-LOK weights and a dedicated tip weight to shift mass to the places that actually change how the rifle handles.
Shop Premier Gen2 Configurations.
Choose a chassis for your rifle, then select the exact inlet, color and buttstock configuration on the product listing.
Remington 700 SA
Black · 109512-BLK. A centerfire competition foundation.
Shop Rem 700 →
CZ 457
FDE · 109725-FDE. A natural home for NRL22 and PRS Rimfire.
Shop CZ 457 →
Tikka T3 / T3x SA
Black · 109722-BLK. Competition geometry for a Tikka action.
Shop Tikka →
Howa / Weatherby SA
Folding black configuration. A more compact transport setup.
Shop Folding Gen2 →Weight Where It Matters.
A competition rifle does not need maximum weight everywhere. Start with the ACC Premier Gen2's integrated ARCA and add mass where it shifts your center of gravity onto the bag or barricade. The right adjustment is often only a few ounces away.
Premier Gen2 Tip Weight
Purpose-built 4.32 oz steel tip weight. Move balance forward without loading up the entire chassis.
Shop Tip Weight →ACC Internal Weight
Concealed forward mass for weight management. Check the selected weight and chassis compatibility before ordering.
Shop Internal Weight →Exterior Weights
Expand your balance tuning with M-LOK-mounted weights that suit the Premier Gen2 forend.
Browse Exterior Weights →Put the ARCA Rail to Work.
With ARCA already built into the Premier forend, the next purchase should match how you shoot. Choose lower support for prone and rimfire, or extended adjustment for more complex positional stages.
Ckye-Pod Gen3 Compact
Premium low-profile bipod for a dedicated PRS or NRL22 build.
Shop Gen3 Compact →MDT GRND-POD
A practical way to add capable support without jumping directly to the Ckye-Pod range. Choose the correct ARCA-capable mounting option.
Shop GRND-POD →NV & Control Bridges
Accessory mounting holes on top of the forend support compatible NV and control bridges, sold separately.
Explore Bridges →Shop by Rifle Platform.
Start with the action. Your actual chassis choice depends on model, action length, handedness and magazine pattern.
ACC Premier Gen2 Specs.
Published chassis-system specifications; exact fit and weight vary with the selected action inlet and stock configuration.
Confirm your action inlet, magazine pattern and any unusual barrel contour with MDT before purchasing.
Finish the Build.
The Premier Gen2 is your foundation. Finish it with the barrel, optics, mounts and support gear that make the rest of the rifle work together.
Rifle Barrels
Lilja, Shaw and other match and platform-specific barrel options for your action.
Shop Barrels →Rifle Scopes & Optics
Find glass suited to long-range centerfire, rimfire matches or field use.
Shop Optics →Scope Rings & Bases
Choose the correct rings, scope base and mounting height for your optic.
Shop Mounts →Grips & Controls
The Premier vertical grip is included. Explore compatible AR-pattern grip alternatives and control parts.
Shop Grips →Rifle Magazines
AICS patterns for compatible centerfire inlets, plus factory-pattern rimfire magazines.
Shop Magazines →Bipods
Ckye-Pod and GRND-POD models to take advantage of your integrated ARCA rail.
Shop Bipods →Rifle Triggers
Choose a trigger matched to the specific action in your Premier Gen2 rifle.
Shop Triggers →Shooting Bags
Front, rear and positional support for barricade stages, prone and the bench.
Shop Bags →Chassis Accessories
Weights, thumb rests, NV bridges, ARCA hardware and buttstock parts.
Shop Accessories →CZ 457 Upgrades
Firing pins, extractor parts, springs and other precision rimfire components.
Shop CZ 457 →Remington 700 Parts
Explore compatible triggers, barrel options and precision action hardware.
Shop Rem 700 →Balance Weights
Complete the chassis setup with internal, exterior and tip weight options.
Shop Weights →Premier Today. Elite Tomorrow?
The Premier Gen2 is the sweet spot for serious shooters who want a capable competition chassis with a broad upgrade ecosystem. If you're building a dedicated top-tier PRS rifle from the start, the ACC Elite is the flagship. If you want a more traditional feel or lower starting investment, compare the XRS and ORYX.
ACC Elite · Flagship
MDT's top competition chassis with an expanded range of weight, ergonomic and control options.
Explore ACC Elite →MDT XRS · Crossover
A more traditional stock profile and adjustable fit for range, hunting and general precision work.
Compare XRS →MDT ORYX · Value
One-piece aluminum simplicity and a strong starting point for a budget-minded chassis build.
Compare ORYX →Premier Gen2 Questions Answered.
What's the main upgrade over the original ACC Premier?
The Gen2 uses a shorter, more rigid 15-inch forend, taller integrated barricade stop and bridge attachment points drawn from the ACC Elite platform. It also retains integrated ARCA and a broad weight-tuning system.
Does the ACC Premier Gen2 include an ARCA rail?
Yes. A full-length ARCA/RRS mounting interface is integrated into the forend, so an additional full-length ARCA rail is not necessary.
What is the difference between folding and non-folding versions?
The SRS-X Lite configuration is non-folding and weighs about 4.8 lb as a system. The SRS-XF Premier provides a folding buttstock and weighs about 5.2 lb. Length-of-pull ranges also differ slightly.
Can I adjust the balance for PRS or NRL22?
Yes. The Premier Gen2 supports internal weights, exterior M-LOK weights and a dedicated forend tip weight. Weight can be moved forward to suit barricade bags, optics and barrel profiles.
Which magazines work with this chassis?
Compatible centerfire configurations generally use AICS-pattern magazines. Rimfire inlets use their specified platform magazine systems, such as CZ 457 factory-style magazines.
Does the Premier Gen2 include a grip?
Yes. The Premier vertical grip is included. The chassis also uses an AR-15-pattern grip interface for compatible alternatives.
Keep Building.
More rifle systems and components from Pete's Pillars.
All Rifle Chassis
Compare competition and field-ready chassis from brands we carry.
Shop Chassis →Chassis Accessories
Rails, weights, support parts and upgrades for the complete rifle.
Shop Accessories →Rifle Barrels
Match-grade options and action-specific barrel upgrades.
Browse Barrels →All MDT
Chassis systems, bipods, magazines and accessories from an authorized MDT dealer.
Browse MDT →