Leupold Rifle Scopes & Optics
From the Mark 5HD precision scope to the VX-Freedom Rimfire, Leupold builds optics for very different kinds of rifles and shooting. Shop the exact models we carry, then find the scope rails, rings and rifle parts to finish your setup.
Find Your Leupold
We keep the decision straightforward: a full-size precision optic for extended distances, or a lighter rimfire scope for the field and range. These are different tools, not interchangeable specifications.
Precision & Long Range
Mark 5HD 5-25x56 with a first focal plane PR2-MIL reticle, 35mm maintube and M5C3 adjustments.
Explore Mark 5HD →Rimfire & Field
VX-Freedom Rimfire 3-9x40 with a Rimfire MOA reticle, 1-inch tube and fixed parallax set for rimfire distances.
Explore VX-Freedom →Mounting & Setup
Find the receiver-specific rail or base and the correct ring diameter and height for your optic.
Shop Mounts & Rails →Leupold Scopes We Carry
These are the two rifle scopes currently listed in our Leupold catalog. Each card links directly to its exact model, reticle and configuration.
Mark 5HD 5-25x56 · PR2-MIL
A precision and long-range scope with a 35mm maintube, first focal plane PR2-MIL reticle, and M5C3 ZeroLock elevation turret. The side focus adjusts down to 50 yards on this configuration.
VX-Freedom Rimfire 3-9x40
A lighter 1-inch-tube optic with a second focal plane Rimfire MOA reticle and fixed 60-yard parallax. A practical fit for CZ 457, Ruger 10/22 and other compatible rimfire rifles.
Rifleman See-Thru Scope Rings
We also carry Leupold Rifleman 1-inch high, matte-finish see-thru scope rings. They are a separate mounting product, not a match for the 35mm Mark 5HD. Confirm your scope's tube diameter, firearm mounting interface and required clearance before ordering.
View Leupold Rings 55880 →Two Different Optics, Two Different Jobs
Leupold's product lines cover different shooting needs. Compare the exact models here instead of assuming that every feature in the broader Leupold lineup applies to these two scopes.
First vs. Second Focal Plane
The Mark 5HD uses a first focal plane PR2-MIL reticle whose subtensions stay consistent across magnification. The VX-Freedom Rimfire uses a second focal plane Rimfire MOA reticle.
Parallax & Distance
Our Mark 5HD 5-25x56 adjusts down to 50 yards. The VX-Freedom Rimfire has fixed parallax set at 60 yards, making it an easy choice for general rimfire use.
Reticle & Mounting Fit
Match your scope's reticle and turret units to your shooting style, then select rings by tube diameter. The Mark 5HD is 35mm; the VX-Freedom Rimfire is 1 inch.
Putting a Leupold on a CZ 457 or Ruger 10/22?
Our rimfire catalog goes well beyond optics. The VX-Freedom Rimfire pairs naturally with a properly fitted scope rail and rings on a CZ 457 or Ruger 10/22. Pete's Pillars also manufactures CZ 457 replacement and upgrade parts in the USA, with rifle barrels, chassis, magazines and accessories to finish your build.
Everything Around the Optic
The right scope is only one component. Find the mounting system, rifle hardware and support equipment that works with your actual rifle and intended use.
Scope Rails & Bases
Receiver-specific Picatinny rails and mounts for rimfire and centerfire rifles.
Shop Rails →Scope Rings
Choose the correct tube diameter, ring height and rail interface before installing your optic.
Shop Rings →Rifle Chassis
MDT, KRG and other chassis systems for supported rimfire and centerfire actions.
Shop Chassis →Rifle Barrels
Browse aftermarket barrels from established manufacturers and verify exact fitment.
Shop Barrels →Remington 700 Parts
Chassis, mounts, magazines and rifle components for compatible precision builds.
Shop Rem 700 →Bipods
Support for field shooting, positional practice and precision rifle setups.
Shop Bipods →Magazines
Rimfire and centerfire magazines matched to the rifle and stock or chassis.
Shop Magazines →Explore MDT
Chassis families, ARCA accessories, bipods and precision rifle components.
Visit MDT →Choosing the Right Leupold Scope
Consider the distances you actually shoot
The VX-Freedom Rimfire 3-9x40 is a conventional, lightweight rimfire scope with fixed 60-yard parallax. The Mark 5HD 5-25x56 offers more magnification and target-oriented adjustments, but its minimum side-focus distance is 50 yards on this model. Check that limitation if you frequently shoot rimfire targets closer than 50 yards.
Match the reticle and turret system
Our Mark 5HD uses an FFP PR2-MIL reticle with MIL-based adjustment. Our VX-Freedom Rimfire uses a second focal plane Rimfire MOA reticle. Either can be useful in the right setting; select based on your preferred aiming and correction method.
Confirm the mounting hardware
These scopes do not take the same ring diameter. The Mark 5HD uses a 35mm maintube and the VX-Freedom Rimfire uses a 1-inch maintube. Our featured Rifleman 1-inch rings are not suitable for the 35mm Mark 5HD. Find suitable options in our mounting catalog and verify the exact product specifications.
Leupold Optics FAQ
Which Leupold products are listed at Pete's Pillars?
Our Leupold catalog currently features the Mark 5HD 5-25x56 PR2-MIL riflescope (180222), the VX-Freedom Rimfire 3-9x40 (174181) and Rifleman See-Thru 1-inch high scope rings (55880). See the Leupold brand catalog for current selections and availability.
What is the tube size of the Leupold Mark 5HD 5-25x56?
The featured Mark 5HD, part number 180222, uses a 35mm maintube. Choose compatible 35mm rings or a 35mm mounting system with appropriate height and receiver interface.
Will the VX-Freedom Rimfire work on a CZ 457 or Ruger 10/22?
It can be a suitable choice for these rimfire rifles when installed with compatible mounts and rings. The scope uses a 1-inch maintube, a 3-9x magnification range, and fixed 60-yard parallax. Confirm rifle-specific mounting requirements.
Is the Mark 5HD PR2-MIL reticle first focal plane?
Yes. The featured Mark 5HD 180222 has an FFP PR2-MIL reticle. Its subtensions remain consistent throughout the magnification range.
Can I use the Leupold Rifleman rings with the Mark 5HD?
No. The Rifleman rings listed here, part number 55880, have a 1-inch ring diameter. The Mark 5HD featured here has a 35mm maintube.
Do I need a canted rail for precision shooting?
Not always. A canted rail can preserve useful elevation adjustment for longer distances, but the appropriate angle depends on your rifle, scope adjustment range, zero distance and intended use. Compare scope mounting options for your receiver.
Where do I find parts to complete my rifle?
Browse our rifle optics hub, chassis catalog, or CZ 457 products for compatible parts. Always verify product-specific fitment before ordering.