PETE'S PILLARS CZ 452 / 455 / 457 GEN 2 EXTRACTOR & HOLDER SPRING | MADE IN USA
The Small Spring Behind Every Clean Extraction.
The Pete's Pillars PP457SP2 is a stronger Gen 2 replacement for the CZ factory extractor and holder spring (OEM 5080062201). Made in the USA from black spring steel, it keeps positive tension on the extractor and holder so your CZ 455 or 457 grabs and throws every case, round after round.
The extractor spring is easy to overlook until it isn't. It's a tiny part working on every single shot, and after thousands of rounds a tired spring can let the extractor lose its grip. The PP457SP2 restores that tension with a stronger Gen 2 design that's been through several thousand cycles in testing without a failure. It's one of the most affordable upgrades you can make to a CZ bolt, and one of the most important. Use it for: high-round-count trainers, NRL22 and PRS Rimfire rifles, rebuilding a well-used CZ and any full bolt refresh.
Built Stronger. Built to Last.
Each PP457SP2 is made from black spring steel in a stronger Gen 2 design that holds the extractor and holder firmly in place. The steel is unplated, so a light film of oil keeps it rust-free and working smoothly. Whether you're shooting a match, plinking a brick of ammo or hunting squirrels on a cold morning, it's built to keep your extraction consistent.
Pair It with the PP457ES.
The Complete Extraction Upgrade
PP457ES Extractor & Holder Set
The spring is half the system. Our PP457ES replaces the factory extractor and holder with upgraded parts made in the USA by Pete's Pillars. Install them together with the PP457SP2 and the whole extraction system is fresh and working as one.
See the PP457ES →Complete the Bolt Refresh
A fresh spring is the perfect time to upgrade the rest of the bolt. These Made-in-USA Pete's Pillars parts finish the job.
Made in USAPP457FP-T Firing Pin
The CZ 457 part we're known for.
View Product
Made in USAPP457LCI Cocking Indicator
Extended stainless indicator you can see and feel.
View Product
Made in USAPP4KG Bolt Knob
Slim knurled, grooved billet knob for faster cycling.
View Product
Made in USAPP45715 15 MOA Rail
Converts the 11mm dovetail to solid Picatinny.
View ProductPair It With a Match Barrel
The Next Step for Your CZ 457
Pete's Pillars, Lilja and L3i match barrels for the CZ 455/457, or start fresh with a match-chambered barreled action.
Pete's Pillars
Pete's Pillars 22″ Threaded Match Barrel.960 stainless, MTR chamber, 1/2-28 threads.View Barrel →
Pete's Pillars
Pete's Pillars 26″ .960 Match BarrelLonger stainless .960 contour, MTR chamber.View Barrel →
Lilja
Lilja 24″ 1.180″ Bull BarrelHand-lapped 3-groove, Lilja 3 match chamber.View Barrel →
L3i
L3i 24″ Drop-In Match Barrel1.180″ 416R with the Wasp Match Chamber.View Barrel →
CZ
CZ 457 Varmint MTR Barreled ActionStart fresh: MTR chamber, 20.5″ heavy barrel.View Action →
Did You Know?
Pete's Pillars Carries More Than CZ 457 Parts.
From centerfire chassis to optics and reloading, outfit every rifle in the safe in one place.
Optics & Mounts
Bipods & Magazines
Product Specifications
Manufacturer: Pete's Pillars
Product: Gen 2 Extractor & Holder Spring
MPN: PP457SP2
Replaces: CZ OEM 5080062201
Compatible Rifles: CZ 455 and 457; also tested in CZ 452, 453 and select BRNO rifles
Material: Black Spring Steel, Unplated
Includes: One Spring
Your Choice (sold separately): PP457ES Extractor & Holder Set
Manufactured: Made in USA by Pete's Pillars
Frequently Asked Questions
Fitment, care and completing your CZ extraction upgrade.
Which rifles does the PP457SP2 fit?
It's designed for the CZ 455 and 457, and it has also been tested in the CZ 452, 453 and select BRNO rifles. BRNO configurations vary, so check your spring assembly first.
Will it fit my rifle?
Our parts fit most CZ rifles. We machine to very tight tolerances, so every now and then a production rifle with factory tolerance stack-up falls a little outside that range.
What OEM part does it replace?
It replaces CZ factory part 5080062201, the spring that holds the extractor and holder in place.
Does it include the extractor and holder?
No, the PP457SP2 is the spring only. Pair it with our PP457ES Extractor & Holder Set for a complete extraction upgrade.
Does it work with aftermarket extractors?
It's designed around the factory-style extractor system and our PP457ES. For third-party extractor systems, check that maker's guidance.
How do I care for it?
The spring steel is unplated, so keep a light film of oil on it to prevent rust. Avoid overstretching it during installation.
What else should I upgrade on the bolt?
Complete the refresh with our PP457FP-T Firing Pin, PP457LCI Cocking Indicator and a PP4KG Bolt Knob. See everything in our CZ 457 Parts Collection.
Small Change. Big Impact. Pete's Pillars.
PETE'S PILLARS CZ 452 / 455 / 457 GEN 2 EXTRACTOR & HOLDER SPRING | MADE IN USA
The Small Spring Behind Every Clean Extraction.
The Pete's Pillars PP457SP2 is a stronger Gen 2 replacement for the CZ factory extractor and holder spring (OEM 5080062201). Made in the USA from black spring steel, it keeps positive tension on the extractor and holder so your CZ 455 or 457 grabs and throws every case, round after round.
The extractor spring is easy to overlook until it isn't. It's a tiny part working on every single shot, and after thousands of rounds a tired spring can let the extractor lose its grip. The PP457SP2 restores that tension with a stronger Gen 2 design that's been through several thousand cycles in testing without a failure. It's one of the most affordable upgrades you can make to a CZ bolt, and one of the most important. Use it for: high-round-count trainers, NRL22 and PRS Rimfire rifles, rebuilding a well-used CZ and any full bolt refresh.
Built Stronger. Built to Last.
Each PP457SP2 is made from black spring steel in a stronger Gen 2 design that holds the extractor and holder firmly in place. The steel is unplated, so a light film of oil keeps it rust-free and working smoothly. Whether you're shooting a match, plinking a brick of ammo or hunting squirrels on a cold morning, it's built to keep your extraction consistent.
Pair It with the PP457ES.
The Complete Extraction Upgrade
PP457ES Extractor & Holder Set
The spring is half the system. Our PP457ES replaces the factory extractor and holder with upgraded parts made in the USA by Pete's Pillars. Install them together with the PP457SP2 and the whole extraction system is fresh and working as one.
See the PP457ES →Complete the Bolt Refresh
A fresh spring is the perfect time to upgrade the rest of the bolt. These Made-in-USA Pete's Pillars parts finish the job.
Made in USAPP457FP-T Firing Pin
The CZ 457 part we're known for.
View ProductMade in USAPP457LCI Cocking Indicator
Extended stainless indicator you can see and feel.
View ProductMade in USAPP4KG Bolt Knob
Slim knurled, grooved billet knob for faster cycling.
View ProductMade in USAPP45715 15 MOA Rail
Converts the 11mm dovetail to solid Picatinny.
View ProductPair It With a Match Barrel
The Next Step for Your CZ 457
Pete's Pillars, Lilja and L3i match barrels for the CZ 455/457, or start fresh with a match-chambered barreled action.
Pete's Pillars
Pete's Pillars 22″ Threaded Match Barrel.960 stainless, MTR chamber, 1/2-28 threads.View Barrel →
Pete's Pillars
Pete's Pillars 26″ .960 Match BarrelLonger stainless .960 contour, MTR chamber.View Barrel →
Lilja
Lilja 24″ 1.180″ Bull BarrelHand-lapped 3-groove, Lilja 3 match chamber.View Barrel →
L3i
L3i 24″ Drop-In Match Barrel1.180″ 416R with the Wasp Match Chamber.View Barrel →
CZ
CZ 457 Varmint MTR Barreled ActionStart fresh: MTR chamber, 20.5″ heavy barrel.View Action →
Did You Know?
Pete's Pillars Carries More Than CZ 457 Parts.
From centerfire chassis to optics and reloading, outfit every rifle in the safe in one place.
Optics & Mounts
Bipods & Magazines
Product Specifications
Manufacturer: Pete's Pillars
Product: Gen 2 Extractor & Holder Spring
MPN: PP457SP2
Replaces: CZ OEM 5080062201
Compatible Rifles: CZ 455 and 457; also tested in CZ 452, 453 and select BRNO rifles
Material: Black Spring Steel, Unplated
Includes: One Spring
Your Choice (sold separately): PP457ES Extractor & Holder Set
Manufactured: Made in USA by Pete's Pillars
Frequently Asked Questions
Fitment, care and completing your CZ extraction upgrade.
Which rifles does the PP457SP2 fit?
It's designed for the CZ 455 and 457, and it has also been tested in the CZ 452, 453 and select BRNO rifles. BRNO configurations vary, so check your spring assembly first.
Will it fit my rifle?
Our parts fit most CZ rifles. We machine to very tight tolerances, so every now and then a production rifle with factory tolerance stack-up falls a little outside that range.
What OEM part does it replace?
It replaces CZ factory part 5080062201, the spring that holds the extractor and holder in place.
Does it include the extractor and holder?
No, the PP457SP2 is the spring only. Pair it with our PP457ES Extractor & Holder Set for a complete extraction upgrade.
Does it work with aftermarket extractors?
It's designed around the factory-style extractor system and our PP457ES. For third-party extractor systems, check that maker's guidance.
How do I care for it?
The spring steel is unplated, so keep a light film of oil on it to prevent rust. Avoid overstretching it during installation.
What else should I upgrade on the bolt?
Complete the refresh with our PP457FP-T Firing Pin, PP457LCI Cocking Indicator and a PP4KG Bolt Knob. See everything in our CZ 457 Parts Collection.
Small Change. Big Impact. Pete's Pillars.
| Brand | Pete's Pillars |
| Gun Platform | CZ 457 |
| Type | Bolt Parts |