Warne Scope Rings, Rails & Mounts
Choose a dependable connection between your optic and your rifle. Shop Warne Maxima quick-detach rings, rimfire dovetail rings and skeletonized one-piece mounts at Pete's Pillars, then find receiver-specific Picatinny rails and scope bases to complete your setup.
Start with Your Scope and Rifle
The correct scope-ring diameter is determined by your scope's main tube, not the objective lens. Once that is matched, choose the mounting system and ring height based on your receiver, base and clearance requirements.
Maxima QD Scope Rings
Vertically split steel rings with quick-detach levers, offered here in 30mm and 1-inch tube sizes.
Compare Warne Rings →Rimfire Dovetail Rings
Dedicated Maxima .22 ring options for the compatible dovetail receivers described on each listing.
View Rimfire Rings →One-piece Optics Mounts
Extended skeletonized mounts for specified scope tube sizes and compatible mounting interfaces.
Explore Scope Mounts →Maxima QD 30mm Scope Rings
These three Maxima QD ring sets share the 30mm scope-tube fit, with low, medium and high choices for different optical clearance needs. Match the ring's mounting-base requirements before choosing a height.
Warne Maxima QD 30mm Low
Low-height steel rings for compatible bases where a lower scope position provides adequate clearance.
Warne Maxima QD 30mm Medium
A versatile medium-height choice with Warne’s indexable quick-detach levers and vertically split steel construction.
Warne Maxima QD 30mm High
High-profile 30mm Maxima QD rings for setups requiring more objective or receiver clearance.
Maxima QD 1-inch Scope Rings
Running a 1-inch main-tube scope? These medium and high options provide the correct tube size in Warne's QD ring family. Do not substitute a 30mm ring for a 1-inch tube.
Warne Maxima QD 1-inch Medium
Maxima QD rings sized for a 1-inch scope tube, with a medium mounting height.
Warne Maxima QD 1-inch High
A high-position 1-inch QD ring set for compatible mounting bases and scope configurations.
Warne Maxima .22 Rimfire Rings
For compatible rimfire receivers, the Maxima .22 line provides a different path from Picatinny-mounted centerfire rings. These two listed models are 30mm-tube rings advertised for specified 11mm and 3/8-inch dovetail applications; confirm the exact receiver rail profile.
Warne Maxima .22 Rimfire 30mm Medium
Medium rimfire rings listed for compatible 11mm and 3/8-inch dovetail mounting applications.
Warne Maxima .22 Rimfire 30mm High
A high version for compatible rimfire dovetail receivers and 30mm-tube optics.
Building a CZ 457 or Ruger 10/22? Check your receiver's actual mounting interface before selecting rings or adding a conversion rail.
Extended Skeletonized Mounts
A one-piece mount positions the optic as a single assembly, rather than using two separate rings. The two Warne models currently listed at Pete's Pillars differ in tube diameter, finish and mounting specifications, so compare the exact model before ordering.
Warne Extended Skeletonized 30mm Mount
An extended one-piece optics mount with a 30mm ring interface and a 20 MOA inclination.
Warne Gen 2 Skeletonized 1-inch Mount
A one-piece extended scope mount for 1-inch tubes, finished in OD Green.
Scope Rails & Bases
A set of Warne rings needs a compatible mounting surface. Explore our receiver-specific scope rails, Picatinny bases and optics mounting hardware for CZ 457, Remington 700, Ruger 10/22 and other platforms. These rails are part of our wider catalog and are not presented as Warne-manufactured products.
Pair Warne Rings with the Right Base
A correctly sized scope ring is only half of the fitment. Make sure the base matches the receiver and that the rail or dovetail matches the ring's clamping system.
Picatinny Scope Rails
Receiver-specific rails, bases and mounting components in one place.
Explore Rails →CZ 457 Optic Mounting
Explore CZ 457 parts and mounting options, then confirm your dovetail and rail configuration.
Shop CZ 457 →Remington 700 Mounting
Find scope bases and complementary accessories for the exact receiver pattern.
Shop Remington 700 →
Skyline Precision Bipod
After the scope is mounted, a compatible shooting support can round out the rifle. The Skyline Precision Bipod 7901M is a separate Picatinny-interface support product, not an optics rail.
Explore Warne Skyline 7901M →A Match Made in Precision.
A quality name like Warne deserves quality glass. Pair the right Warne rings with a Leupold riflescope, or finish the mounting system with receiver-specific Talley or MDT rails. Shopping for a Holosun red dot instead? Start with the optic and its own mounting interface. A complete setup starts with parts chosen to work together.
Leupold Rifle Scopes
A quality Warne mounting system deserves an optic to match. Explore Leupold Mark 5HD and VX-Freedom rifle scopes.
SHOP LEUPOLD RED & GREEN DOTSHolosun Optics
Explore Holosun reflex and red-dot sights for builds that call for a different sighting setup. Confirm each optic’s mounting footprint.
SHOP RED DOTS RECEIVER BASESTalley Scope Mounts
Compare Talley receiver-specific scope bases and mounting options, including Tikka T1x rails. Match the base to your rifle first.
EXPLORE TALLEY PRECISION RAILSMDT Scope Rails
Explore MDT Picatinny scope bases, including the 20 MOA Remington 700 short-action rail. Check receiver pattern before ordering.
VIEW MDT RAIL MORE MOUNTING OPTIONSScope Rails & Bases
Find more Picatinny rails, one-piece scope bases and mounting hardware for compatible rifle receivers.
SHOP MORE RAILS MORE QUALITY GLASSRifle Scopes
Browse our wider selection of precision, hunting and rimfire scopes to find the optic that suits your rifle and shooting style.
SHOP RIFLE SCOPESMatch the scope's main-tube diameter, ring height, mounting interface and receiver-specific rail before ordering. Reflex sights generally use their own mounting footprints, not conventional riflescope rings.
Choosing Scope Rings and Mounts
Scope tube size comes first
A 1-inch scope tube and a 30mm scope tube require different rings. Check the scope manufacturer's main-tube specification before deciding between the Maxima QD models shown above.
Ring height depends on the full rifle setup
Low, medium and high ring labels do not guarantee clearance on every rifle. Consider objective housing diameter, receiver geometry, rail height, bolt clearance and the optic's position before choosing.
Picatinny bases and rimfire dovetails are different
Warne's dedicated .22 rimfire rings are not interchangeable with every Picatinny-mounted Maxima model. The listed dovetail variants have their own fitment requirements. Confirm the manufacturer's exact application for your rifle.
One-piece optics mounts have a different job
Warne's extended skeletonized mounts provide a one-piece configuration. Confirm tube size, rail interface and the mount's intended geometry instead of assuming it fits any receiver.
Browse the Pete's Pillars scope mounting hub for complementary rails, bases and other rifle-specific options.
Warne Scope Rings, Rails & Mounts FAQ
Which Warne rings fit a 30mm riflescope?
Use rings identified for a 30mm main tube. The listed 213LM, 214LM and 215LM Maxima QD rings are 30mm models with different heights. Match the mounting base and clearance requirements as well.
Do Warne 1-inch rings fit a 30mm tube?
No. Tube diameter must match the ring's specified diameter. The 201LM and 202LM options on this page are for 1-inch main tubes, not 30mm tubes.
What is the difference between Warne Maxima QD ring heights?
Low, medium and high provide different mounting heights. The correct choice depends on the scope's objective size, your receiver, base height and required clearance, not simply personal preference.
Can Warne rimfire rings fit a CZ 457?
The Warne 731M and 732M listings describe 11mm and 3/8-inch dovetail compatibility, but exact CZ 457 receiver and ring fitment still requires checking the manufacturer's specifications. A separate Picatinny rail changes the required ring interface.
Are Warne QD rings the same as one-piece optics mounts?
No. Maxima QD models are separate rings with detachable levers. The extended skeletonized mount options are one-piece systems. Use the style, tube size and mounting interface specified for the exact product.
Do you sell Picatinny rails to go with Warne rings?
Yes. We carry rifle-specific scope rails and bases in our wider catalog. The currently listed Warne products emphasize rings and mounts, so the compatible rail may come from another manufacturer.
Where can I find all Warne products at Pete's Pillars?
Browse the Warne brand catalog for the current selection of rings, mounts and other Warne products. Listings and availability can change.