- Shop
- TandemKross Ruger 10/22 Spartan Skeletonized Charging Handle Recoil Rod TK18N0121BLK1
TandemKross Ruger 10/22 Spartan Skeletonized Charging Handle Recoil Rod TK18N0121BLK1
https://www.petespillars.com/shop/tk18n0121blk1-tandemkross-ruger-10-22-spartan-skeletonized-charging-handle-recoil-rod-tk18n0121blk1-31386 https://www.petespillars.com/web/image/product.template/31386/image_1920?unique=7811384TANDEMKROSS SPARTAN SKELETONIZED CHARGING HANDLE | RUGER 10/22 | BLACK
A Bigger Grip That Blends Right In.
The TandemKross Spartan TK18N0121BLK1 replaces the small factory charging handle on your Ruger 10/22 with a long, curved, skeletonized handle in a low-profile black finish. It rides on a stainless steel guide rod, installs without permanent modification and fits standard 10/22 rifles, 10/22 Takedowns and 22 Charger pistols.
The factory 10/22 charging handle is a small knob that gets harder to work with cold hands, gloves or an optic sitting low over the receiver. The Spartan gives you roughly twice the handle to grab, so charging the rifle and clearing a malfunction is quicker and more positive. It's one of the most popular first upgrades on the 10/22, and it's a fast way to make a factory rifle feel like a custom build. Use it for: rimfire steel challenge, NRL22, plinking, small game and any 10/22 or 22 Charger build that deserves a better grip.
Built for Leverage.
The Spartan's elongated, curved profile puts more surface under your finger and more leverage behind every pull. The skeletonized cuts keep it light, and the stainless steel guide rod and recoil spring are retained on the assembly, so the spring stays put during cleaning and you can swap spring weights to tune for your ammunition. Installation uses no special tools and makes no permanent changes to your rifle. Made in the USA by TandemKross.
Why Black?
Black keeps the upgrade all business. It matches the factory 10/22 receiver and most black stocks and chassis, so you get the bigger grip without changing the look of the rifle, and its low-glare finish suits hunting and field rifles. Pair it with the Volquartsen TG2000 Black Trigger Guard for a clean, all-black build. Want a little contrast? The Spartan also comes in Red and Silver.
Building a KIDD- or Volquartsen-Grade 10/22?
KIDD and Volquartsen set the bar for competition 10/22s, and a lot of serious builds pair a KIDD single-stage trigger or receiver parts with TandemKross controls. We stock a deep selection of Volquartsen components plus KIDD parts like the KIDD Rear Tang. Whichever way you build, our stainless V-Block Screws and take-down screws are machined to fit KIDD and Volquartsen setups. Ready for more barrel? The Volquartsen UltraLite 16.5″ VCULB-28 keeps the rifle light, and the Volquartsen 18.5″ .920 Match Bull Barrel VC10NC-28 is built for the bench (confirm your stock's barrel channel clearance).
Pair It With
Bull-Barrel Ready
Stocks & Chassis for Your 10/22
Field-ready and competition-proven homes for a bull barrel. Confirm barrel channel clearance on each listing.
Upgrade the Rest
Complete Your 10/22
Buffers, screws, bolts, triggers, rails and more, ready to ship.
The Next Level
Go All Black. Upgrade the Trigger.
- Volquartsen TG2000 billet-aluminum trigger guard assembly
- Light, crisp competition trigger pull
- Black finish matches the Spartan for a stealthy, matched build
Shopping a KIDD or TandemKross single-stage trigger? The TG2000 is the drop-in Volquartsen alternative. Prefer silver? See the TG2000 Silver VCTP-1-S-10-RR.
Did You Know?
Pete's Pillars Sells More Than Pillars.
From centerfire chassis to optics and reloading, outfit every rifle in the safe in one place.
Optics & Mounts
Bipods & Magazines
Product Specifications
Manufacturer: TandemKross
Model: Spartan Skeletonized Charging Handle
MPN: TK18N0121BLK1 (also listed as 3018N0121BLK1)
Finish: Black
Design: Extended Curved, Skeletonized Handle
Includes: Charging Handle with Stainless Steel Guide Rod and Recoil Spring
Fits: Standard Ruger 10/22 Rifles, 10/22 Takedown and Takedown Lite, 22 Charger, Charger Takedown and Charger Lite
Installation: Replaces Factory Charging Handle Assembly, No Permanent Modification
Manufactured: USA
Frequently Asked Questions
Fitment, installation, finish and completing your Ruger 10/22.
Will it fit my rifle?
The Spartan is built for standard Ruger 10/22 rifles (Carbine, Sporter, Compact, Tactical and Target), the 10/22 Takedown and Takedown Lite, and the 22 Charger, Charger Takedown and Charger Lite. If your rifle runs an aftermarket bolt or receiver, such as KIDD, check fit and spring weight with your build.
Is installation difficult?
No. The Spartan replaces your factory charging handle assembly during normal 10/22 disassembly. No special tools and no permanent modification to the rifle.
Does it come with a guide rod and spring?
Yes. It includes a stainless steel guide rod and recoil spring retained on the assembly. It can be taken apart for cleaning or to swap spring weights for your ammunition.
What does the black finish look like, and what pairs with it?
It's a low-glare black finish that matches the factory 10/22 receiver and most black stocks and chassis. For a matched build, pair it with the Volquartsen TG2000 Black Trigger Guard. Want a different look? The Spartan also comes in Red and Silver.
Will it help with a scope or red dot mounted?
Yes. With an optic sitting low over the receiver, the small factory knob can be hard to reach. The Spartan's longer, curved handle gives you more to grab, with or without gloves.
What else should I upgrade on my 10/22?
Start with our P7643-BLK Buffer & Trigger Pin Kit and Stainless V-Block Screws, add a Midwest Industries Picatinny Rail, then step up the trigger with a Volquartsen TG2000.
Does Pete's Pillars sell more than 10/22 parts?
Yes. We make CZ 457 parts and pillar bedding, and we carry centerfire chassis from MDT, XLR and Grey Birch, Lilja and L3i barrels, optics and mounts, reloading gear like the Area 419 ZERO press, and Ruger 10/22 and Mark IV upgrades from Volquartsen and KIDD.
Small Change. Big Impact. Pete's Pillars.
TANDEMKROSS SPARTAN SKELETONIZED CHARGING HANDLE | RUGER 10/22 | BLACK
A Bigger Grip That Blends Right In.
The TandemKross Spartan TK18N0121BLK1 replaces the small factory charging handle on your Ruger 10/22 with a long, curved, skeletonized handle in a low-profile black finish. It rides on a stainless steel guide rod, installs without permanent modification and fits standard 10/22 rifles, 10/22 Takedowns and 22 Charger pistols.
The factory 10/22 charging handle is a small knob that gets harder to work with cold hands, gloves or an optic sitting low over the receiver. The Spartan gives you roughly twice the handle to grab, so charging the rifle and clearing a malfunction is quicker and more positive. It's one of the most popular first upgrades on the 10/22, and it's a fast way to make a factory rifle feel like a custom build. Use it for: rimfire steel challenge, NRL22, plinking, small game and any 10/22 or 22 Charger build that deserves a better grip.
Built for Leverage.
The Spartan's elongated, curved profile puts more surface under your finger and more leverage behind every pull. The skeletonized cuts keep it light, and the stainless steel guide rod and recoil spring are retained on the assembly, so the spring stays put during cleaning and you can swap spring weights to tune for your ammunition. Installation uses no special tools and makes no permanent changes to your rifle. Made in the USA by TandemKross.
Why Black?
Black keeps the upgrade all business. It matches the factory 10/22 receiver and most black stocks and chassis, so you get the bigger grip without changing the look of the rifle, and its low-glare finish suits hunting and field rifles. Pair it with the Volquartsen TG2000 Black Trigger Guard for a clean, all-black build. Want a little contrast? The Spartan also comes in Red and Silver.
Building a KIDD- or Volquartsen-Grade 10/22?
KIDD and Volquartsen set the bar for competition 10/22s, and a lot of serious builds pair a KIDD single-stage trigger or receiver parts with TandemKross controls. We stock a deep selection of Volquartsen components plus KIDD parts like the KIDD Rear Tang. Whichever way you build, our stainless V-Block Screws and take-down screws are machined to fit KIDD and Volquartsen setups. Ready for more barrel? The Volquartsen UltraLite 16.5″ VCULB-28 keeps the rifle light, and the Volquartsen 18.5″ .920 Match Bull Barrel VC10NC-28 is built for the bench (confirm your stock's barrel channel clearance).
Pair It With
Bull-Barrel Ready
Stocks & Chassis for Your 10/22
Field-ready and competition-proven homes for a bull barrel. Confirm barrel channel clearance on each listing.
Upgrade the Rest
Complete Your 10/22
Buffers, screws, bolts, triggers, rails and more, ready to ship.
The Next Level
Go All Black. Upgrade the Trigger.
- Volquartsen TG2000 billet-aluminum trigger guard assembly
- Light, crisp competition trigger pull
- Black finish matches the Spartan for a stealthy, matched build
Shopping a KIDD or TandemKross single-stage trigger? The TG2000 is the drop-in Volquartsen alternative. Prefer silver? See the TG2000 Silver VCTP-1-S-10-RR.
Did You Know?
Pete's Pillars Sells More Than Pillars.
From centerfire chassis to optics and reloading, outfit every rifle in the safe in one place.
Optics & Mounts
Bipods & Magazines
Product Specifications
Manufacturer: TandemKross
Model: Spartan Skeletonized Charging Handle
MPN: TK18N0121BLK1 (also listed as 3018N0121BLK1)
Finish: Black
Design: Extended Curved, Skeletonized Handle
Includes: Charging Handle with Stainless Steel Guide Rod and Recoil Spring
Fits: Standard Ruger 10/22 Rifles, 10/22 Takedown and Takedown Lite, 22 Charger, Charger Takedown and Charger Lite
Installation: Replaces Factory Charging Handle Assembly, No Permanent Modification
Manufactured: USA
Frequently Asked Questions
Fitment, installation, finish and completing your Ruger 10/22.
Will it fit my rifle?
The Spartan is built for standard Ruger 10/22 rifles (Carbine, Sporter, Compact, Tactical and Target), the 10/22 Takedown and Takedown Lite, and the 22 Charger, Charger Takedown and Charger Lite. If your rifle runs an aftermarket bolt or receiver, such as KIDD, check fit and spring weight with your build.
Is installation difficult?
No. The Spartan replaces your factory charging handle assembly during normal 10/22 disassembly. No special tools and no permanent modification to the rifle.
Does it come with a guide rod and spring?
Yes. It includes a stainless steel guide rod and recoil spring retained on the assembly. It can be taken apart for cleaning or to swap spring weights for your ammunition.
What does the black finish look like, and what pairs with it?
It's a low-glare black finish that matches the factory 10/22 receiver and most black stocks and chassis. For a matched build, pair it with the Volquartsen TG2000 Black Trigger Guard. Want a different look? The Spartan also comes in Red and Silver.
Will it help with a scope or red dot mounted?
Yes. With an optic sitting low over the receiver, the small factory knob can be hard to reach. The Spartan's longer, curved handle gives you more to grab, with or without gloves.
What else should I upgrade on my 10/22?
Start with our P7643-BLK Buffer & Trigger Pin Kit and Stainless V-Block Screws, add a Midwest Industries Picatinny Rail, then step up the trigger with a Volquartsen TG2000.
Does Pete's Pillars sell more than 10/22 parts?
Yes. We make CZ 457 parts and pillar bedding, and we carry centerfire chassis from MDT, XLR and Grey Birch, Lilja and L3i barrels, optics and mounts, reloading gear like the Area 419 ZERO press, and Ruger 10/22 and Mark IV upgrades from Volquartsen and KIDD.
Small Change. Big Impact. Pete's Pillars.
| Brand | TandemKross |
| Gun Platform | 10/22 |