PETE'S PILLARS BEDDING HELPER HARDWARE | M6 × 1.0 METRIC
The Right Thread. A Better Bedding Setup.
The Pete's Pillars Bedding Helper Hardware Kit M6 × 1.0 is the companion hardware for rifle stock pillar bedding projects built around M6 × 1.0 metric action screws. It's there for the alignment and fitting work, helping keep the action and pillars lined up while you build a solid bedding foundation.
You've picked the right pillar dimensions and you're ready to work on the stock. This is the other piece of the job: helper hardware matched to the action screw threads, so you're not trying to make the wrong fastener work. Pair it with our Competition, SlimLine or Gunsmith pillar bedding products. Use it for: stock bedding, pillar positioning, replacement stock projects and custom rifle builds using M6 × 1.0 action screw threads.
Built for the Bedding Job.
The action screw thread is the starting point for choosing helper hardware. The stock inlet tells you which profile of pillar kit belongs in the build; the threaded interface tells you which helper kit to use. Keeping those choices separate makes it easier to match the hardware to the rifle without confusing metric, imperial or fine-thread action screw patterns.
Common M6 × 1.0 Rifle Inlets & Actions
These are the mainstream rifle platforms to check for this thread specification. They cover several of our existing Pete's Pillars bedding kit families, but model-specific screw configurations still matter.
Howa / WeatherbyHowa 1500 Short Action, Howa 1500 Long Action, Howa Mini Action and Weatherby Vanguard
CZ RimfireCZ 452 and CZ 455
Additional M6 ApplicationsSmith & Wesson Model 1500 and select Sako actions, subject to confirmation of the exact action screw pitch
Important distinction: this is M6 × 1.0, not a universal 6 mm bedding kit. A CZ 457 uses M5 × 0.8 action screws, while many Anschutz Match 54 rifles use M6 × 0.75 fine threads. Match the actual thread specification before choosing the helper hardware.
Pair It With the Correct Pillars.
We make profiled pillars for different rifle inlets and stock dimensions. Choose the pillar kit for the rifle and stock first, then use this M6 × 1.0 helper hardware when the action screws match.
Also available: Tikka SlimLine, Howa / Weatherby SlimLine, CZ 455 SlimLine and CZ 452 Competition pillars.
Build from the Foundation
Find the Pillars for Your Rifle.
Competition 1/2″ outside diameter, SlimLine 7/16″ outside diameter or LargeBore 5/16″ inside diameter. Choose by the rifle inlet and available stock material, then add the correct thread-matched helper hardware for the project.
Explore Pillar Bedding Kits →
Did You Know?
Pete's Pillars Sells More Than Pillars.
From centerfire chassis to optics and reloading, outfit every rifle in the safe in one place.
Product Specifications
Brand: Pete's Pillars
Product: Bedding Helper Hardware Kit
Thread: M6 × 1.0 metric
Application: Alignment and fitting during rifle stock pillar bedding work on compatible M6 × 1.0 actions
Your Choice: Competition, SlimLine and Gunsmith pillar bedding kits and bedding epoxy (sold separately)
Frequently Asked Questions
Thread fitment, rifle inlets and putting together the right bedding hardware.
Which rifle inlets use the M6 x 1.0 kit?
Common examples include Tikka T1x and T3/T3x, Howa 1500 and Mini Action, Weatherby Vanguard, and CZ 452/455. The Smith & Wesson Model 1500 and certain Sako actions can also be candidates. The deciding specification is the action screw thread on your particular rifle, not just the stock inlet name.
Will this work on a CZ 457?
No. The CZ 457 uses M5 x 0.8 action screws, so this M6 x 1.0 helper kit is not the correct choice. Match the helper hardware to the actual action screw thread.
Can I use it with Pete’s Pillars Competition or SlimLine sets?
Are the bedding pillars included?
Your Choice: the profiled pillar kit and bedding epoxy, where desired, are sold separately. This is the companion helper hardware for alignment work on an M6 x 1.0 application.
Does this replace the rifle’s finished action screws?
No. It is bedding helper hardware intended for the fitting and alignment stage of a stock bedding project, not a replacement set of finished action screws.
Will it fit a custom Manners, McMillan, Boyds or other aftermarket stock?
The stock brand does not establish thread compatibility. This kit works around an M6 x 1.0 action screw thread; choose the matching rifle inlet and pillar dimensions for the aftermarket stock itself.
What about Anschutz, Remington 700, Savage or other actions?
Do not choose this kit based on the rifle brand alone. For example, many Anschutz Match 54 actions use M6 x 0.75 fine threads, CZ 457 uses M5 x 0.8, and Remington 700 generally uses 1/4-28. Those are different from M6 x 1.0. Check the thread specification before selecting helper hardware.
Small Change. Big Impact. Pete's Pillars.