The Perfect Choice for Premium Pillars and Parts
These are profiled pillars and Devcon Plastic Steel Epoxy for Mossberg Patriot actions and clones.
Pillar installation assists in accuracy as it prevents crushing of the stock and prevent stress cracks. Pillars also keep the action from twisting or moving. Consistency is key in accuracy.
These are just the pillars and the epoxy. They are 1/2'' (.4995) in diameter, CNC milled, and made of 6061 aluminum. These pillars are left long at 1.5" so that they can be trimmed to length by the installer, depending on the specific stock that you have. If the pillars are cut too short they will not do their job.
This a DIY kit. In order to utilize this kit you must drill out the stock, and "glue" these into place. Final fit and finish will need to be done during installation. A chamfer may be required on the bottom inner diameter of the pillars to allow for action screw fitment. A drill press is recommended but it can be done with a hand drill or dowel and sandpaper with some patience. Simply scuff up the exterior with some sand paper prior to installation and be sure to degrease.
These will only fit the savage 110/10, 11/111, 12 and clones because of the notch for the magazine well. I have other pillars that will fit other actions such as the Remington 700, cz 455, 527 ruger, mosin nagant, remingtons, These may fit stevens but cannot confirm.
I conduct all business with respect, and try to be professional. I appreciate the same. If something happens please offer a little grace and understanding and contact me about. As a small seller, I work hard to earn good feedback ratings.
| Gun Brand | Mossberg |
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
