MDT CKYE-POD GEN 3 TRIPLE PULL BIPOD – ARCA / PICATINNY
9″ to 36″. The Bipod That Thinks It's a Tripod.
The MDT Ckye-Pod Gen 3 Triple Pull extends from 9″ to 36″, cants up to 360° and mounts to ARCA or Picatinny with MDT's AP Throw Lever Head. Built for PRS field stages, NRL Hunter and long-range hunting, it gives you stable support over tall grass, on steep hillsides and in positions a conventional bipod can't reach.
Most bipods are built for prone. Field matches and real hunting rarely are. When the stage puts you on a rock, a slope or behind brush, the Triple Pull's three-stage legs reach nearly three feet, bridging the gap between a bipod and a tripod so you don't need to carry both. Use it for: PRS field stages, NRL Hunter, mountain and western hunting, and any position where height and terrain are unknown until you get there.
Gen 3 Refinements.
MDT tightened tolerances to reduce play and rattle, added tool-free cant tension that holds its setting, and redesigned the knobs, buttons and latches with larger, tactile controls and machined grip texture. Locking stowed legs prevent accidental deployment between positions, the profile is slimmer with fewer snag points, and the legs remove easily for cleaning. Three leg splay positions (narrow, middle and wide) plus independent leg extension let you level on uneven ground with one hand.
One Bipod, ARCA or Picatinny.
The included AP Throw Lever Head clamps to both ARCA/RRS dovetails and Picatinny rails, with three lever positions: Lock, Slide for repositioning along an ARCA rail, and Remove. Move it between rifles without buying a second bipod. The base also accepts A.R.M.S. #17-compatible heads. Bare M-LOK slots need a rail or adapter. Running an MDT Oryx? Our Made-in-USA PPFL-ARC Full-Length ARCA Rail adds a full-length ARCA surface with two QD cups.
Your Choice: Feet for Your Surface.
The Triple Pull ships with spiked feet for dirt, gravel and natural terrain. Shooting on concrete or smooth barricades? MDT Ckye-Pod rubber feet are available separately. Confirm fitment for the Triple Pull's extended legs before ordering.
Pair It With
A premium support system deserves an equally capable rifle. These ARCA-equipped chassis are built for the same field.
MDT HNT26 ChassisFolding magnesium ARCA chassis for NRL Hunter
MDT ACC Elite CZ 457Flagship 19″ ARCA forend for rimfire PRS
PPFL-ARC ARCA RailMade in USA, full-length ARCA for the Oryx
Also consider the MDT CRBN carbon fiber stock, the ACC Premier Gen2 CZ 457 and the Oryx Sportsman CZ 457, plus spare MDT 10-Round AICS Magazines for your centerfire match kit. Need a prone-height bipod instead? See the Ckye-Pod Gen 3 Compact for PRS and NRL22, or the 5.7 oz MDT Mountain Bipod for ultralight hunting.
Product Specifications
Manufacturer: MDT (Modular Driven Technologies)
Product: Ckye-Pod Gen 3 Triple Pull Bipod
MPN: 114160-BLK
Color: Black
Height Range: 9″ to 36″
Weight: 36 oz (2.3 lb)
Cant: Up to 360°, Tool-Free Tension Adjustment
Leg Splay: Narrow, Middle, Wide
Mounting: AP Throw Lever Head (ARCA / Picatinny), A.R.M.S. #17-Compatible Base
Feet: Spiked (included)
Materials: Anodized Aluminum, Stainless Steel, Black Oxide Components
Stowed Dimensions: 18.59″ L × 3.07″ W × 2.5″ H
Frequently Asked Questions
Height range, mounting, feet and choosing the right Ckye-Pod.
What is the height range of the Triple Pull?
It adjusts from 9″ to 36″, high enough for sitting, kneeling and over-vegetation positions that a standard bipod can't reach.
Does it mount to ARCA and Picatinny?
Yes. The included AP Throw Lever Head clamps to both ARCA/RRS dovetails and Picatinny rails, and the base accepts A.R.M.S. #17-compatible heads.
Will it attach directly to M-LOK?
No. Bare M-LOK slots need an ARCA or Picatinny rail. MDT Oryx owners can add our PPFL-ARC Full-Length ARCA Rail.
How much does it weigh?
36 oz (2.3 lb). It's a specialized extended-height bipod, so it trades some weight for far greater versatility than a prone bipod.
Triple Pull or Gen 3 Compact?
Choose the Triple Pull for elevated field positions and unknown terrain. Choose the Ckye-Pod Gen 3 Compact for a lighter, prone-focused setup for PRS and NRL22.
What feet come with it?
It ships with spiked feet for natural terrain. MDT rubber feet for hard, smooth surfaces are sold separately. Confirm fitment for the Triple Pull before ordering.
Is it good for hunting?
Yes, especially western and mountain hunting where you need to shoot sitting or over brush. For an ultralight prone option, see the MDT Mountain Bipod.
Pete's Pillars is an authorized MDT dealer. We stock MDT bipods, chassis, magazines and accessories alongside our own Made-in-USA upgrades.
Small Change. Big Impact. Pete's Pillars.
MDT CKYE-POD GEN 3 TRIPLE PULL BIPOD – ARCA / PICATINNY
9″ to 36″. The Bipod That Thinks It's a Tripod.
The MDT Ckye-Pod Gen 3 Triple Pull extends from 9″ to 36″, cants up to 360° and mounts to ARCA or Picatinny with MDT's AP Throw Lever Head. Built for PRS field stages, NRL Hunter and long-range hunting, it gives you stable support over tall grass, on steep hillsides and in positions a conventional bipod can't reach.
Most bipods are built for prone. Field matches and real hunting rarely are. When the stage puts you on a rock, a slope or behind brush, the Triple Pull's three-stage legs reach nearly three feet, bridging the gap between a bipod and a tripod so you don't need to carry both. Use it for: PRS field stages, NRL Hunter, mountain and western hunting, and any position where height and terrain are unknown until you get there.
Gen 3 Refinements.
MDT tightened tolerances to reduce play and rattle, added tool-free cant tension that holds its setting, and redesigned the knobs, buttons and latches with larger, tactile controls and machined grip texture. Locking stowed legs prevent accidental deployment between positions, the profile is slimmer with fewer snag points, and the legs remove easily for cleaning. Three leg splay positions (narrow, middle and wide) plus independent leg extension let you level on uneven ground with one hand.
One Bipod, ARCA or Picatinny.
The included AP Throw Lever Head clamps to both ARCA/RRS dovetails and Picatinny rails, with three lever positions: Lock, Slide for repositioning along an ARCA rail, and Remove. Move it between rifles without buying a second bipod. The base also accepts A.R.M.S. #17-compatible heads. Bare M-LOK slots need a rail or adapter. Running an MDT Oryx? Our Made-in-USA PPFL-ARC Full-Length ARCA Rail adds a full-length ARCA surface with two QD cups.
Your Choice: Feet for Your Surface.
The Triple Pull ships with spiked feet for dirt, gravel and natural terrain. Shooting on concrete or smooth barricades? MDT Ckye-Pod rubber feet are available separately. Confirm fitment for the Triple Pull's extended legs before ordering.
Pair It With
A premium support system deserves an equally capable rifle. These ARCA-equipped chassis are built for the same field.
MDT HNT26 ChassisFolding magnesium ARCA chassis for NRL Hunter
MDT ACC Elite CZ 457Flagship 19″ ARCA forend for rimfire PRS
PPFL-ARC ARCA RailMade in USA, full-length ARCA for the Oryx
Also consider the MDT CRBN carbon fiber stock, the ACC Premier Gen2 CZ 457 and the Oryx Sportsman CZ 457, plus spare MDT 10-Round AICS Magazines for your centerfire match kit. Need a prone-height bipod instead? See the Ckye-Pod Gen 3 Compact for PRS and NRL22, or the 5.7 oz MDT Mountain Bipod for ultralight hunting.
Product Specifications
Manufacturer: MDT (Modular Driven Technologies)
Product: Ckye-Pod Gen 3 Triple Pull Bipod
MPN: 114160-BLK
Color: Black
Height Range: 9″ to 36″
Weight: 36 oz (2.3 lb)
Cant: Up to 360°, Tool-Free Tension Adjustment
Leg Splay: Narrow, Middle, Wide
Mounting: AP Throw Lever Head (ARCA / Picatinny), A.R.M.S. #17-Compatible Base
Feet: Spiked (included)
Materials: Anodized Aluminum, Stainless Steel, Black Oxide Components
Stowed Dimensions: 18.59″ L × 3.07″ W × 2.5″ H
Frequently Asked Questions
Height range, mounting, feet and choosing the right Ckye-Pod.
What is the height range of the Triple Pull?
It adjusts from 9″ to 36″, high enough for sitting, kneeling and over-vegetation positions that a standard bipod can't reach.
Does it mount to ARCA and Picatinny?
Yes. The included AP Throw Lever Head clamps to both ARCA/RRS dovetails and Picatinny rails, and the base accepts A.R.M.S. #17-compatible heads.
Will it attach directly to M-LOK?
No. Bare M-LOK slots need an ARCA or Picatinny rail. MDT Oryx owners can add our PPFL-ARC Full-Length ARCA Rail.
How much does it weigh?
36 oz (2.3 lb). It's a specialized extended-height bipod, so it trades some weight for far greater versatility than a prone bipod.
Triple Pull or Gen 3 Compact?
Choose the Triple Pull for elevated field positions and unknown terrain. Choose the Ckye-Pod Gen 3 Compact for a lighter, prone-focused setup for PRS and NRL22.
What feet come with it?
It ships with spiked feet for natural terrain. MDT rubber feet for hard, smooth surfaces are sold separately. Confirm fitment for the Triple Pull before ordering.
Is it good for hunting?
Yes, especially western and mountain hunting where you need to shoot sitting or over brush. For an ultralight prone option, see the MDT Mountain Bipod.
Pete's Pillars is an authorized MDT dealer. We stock MDT bipods, chassis, magazines and accessories alongside our own Made-in-USA upgrades.
Small Change. Big Impact. Pete's Pillars.
| Brand | MDT |
| Type | Bipod |