Weatherby Howa 1500 DELUXE Profiled Pillar DIY Stock Pillar Bedding w/ DEVCON
These are pillars and devcon liquid steel epoxy only.
These are profiled pillars for the Winchester 70.
Pillar installation assists in accuracy as it prevents crushing of the stock and prevent stress cracks. Pillars also keep the action from twisting or moving. Consistency is key in accuracy.
These are just the pillars, they are 1/2'' (.4995) in diameter and made of 6061 aluminum. These pillars are left
long so that they can be trimmed to length by the installer, depending on the specific stock that you have. If the pillars are cut too short they will not do their job.
This a DIY kit. In order to utilize this kit you must drill out the stock, and "glue" these into place. Final fit and finish will need to be done during installation. A chamfer may be required on the bottom inner diameter of the pillars to allow for action screw fitment. A drill press is recommended.
Simply scuff up the exterior with some sand paper prior to installation and be sure to degrease.
These may fit other rifles of Remington and clones, but I cannot know for sure. I have other pillars that will fit other actions such as the CZ455
Please ask any and all questions before buying. I am not a business or a dealer. I simply sell stuff on the side that I do not need. I conduct all business with respect, and try to be professional. I appreciate the same. If something happens please offer a little grace and understanding and contact me about. As a small seller, I work hard to earn good feedback ratings.
** PETE'S PILLARS**
To install this Web App in your iPhone/iPad press and then Add to Home Screen.