When adjusted properly they will prevent the excessive magazine wobble and slop that drives us so mad with our 10/22.
These 2 Set Screws screw into the receiver from the magazine well. They share the same threaded through holes as the V- BLock screws but from the rear.
They can be adjusted then to limit play of the magazine, and loctite into place with blue loctite in order to prevent movement.
A working knowledge of your firearm is required.
Depending on your Barrel Locking screws will determine the adjustment travel. You may need to shorten or trim the V block screws if using aftermarket parts, but that is a rare occurance.
These will work with all 10/22's including clones provided the V block screw holes are threaded all the way through to the magazine well.
Our Pete's Pillars Ruger 10/22 Cross Trigger Assembly Pin kits go great with this upgraded part.
Looking for more 10/22 Accessories? Check out our store for all sorts of high quality 10/22 parts and accessories. Including Pete's Pillar Kits, Pete's 10/22 Parts, Volquartsen, and Green Mountain Barrels.
| Brand | Pete's Pillars |
| Gun Platform | 10/22 |
| Type | Magazine Parts |