These are pillars only. SLIM LINE. Our new slim line allows for a smaller pillar hole to be drilled, and a cost effective approach to bedding. They are not sold with DEVCON or as a kit.
These are pillars for mossberg Patriots actions and clones.
Pillar installation assists in accuracy as it prevents crushing of the stock and prevent stress cracks. Pillars also keep the action from twisting or moving. Consistency is key in accuracy.
These are just the pillars, they are 7/16'' CNC machined, and made of 6061 aluminum. 7/16 is a good wall thickness for bedding pillars.
These pillars are left long so that they can be trimmed to length by the installer, depending on the specific stock that you have. If the pillars are cut too short they will not do their job.
Keep in mind if you are bedding with a large thick bench stock, you will want our standard 1/2 pillars.
This a DIY kit. In order to utilize this kit you must drill out the stock, and "glue" these into place. Final fit and finish will need to be done during installation. A chamfer may be required on the bottom inner diameter of the pillars to allow for action screw fitment. A drill press is recommended.
These can be installed in manners, factory, HS Precision, Boyd's, and McMillian stocks.
These will only fit the Mossberg and clones because of the notch for the magazine well. I have other pillars that will fit other actions such as the Remington 700, CZ 455, 527 Ruger, Mosin Nagant, Remingtons, these are high quality, well finished pillars.
Please ask any and all questions before buying. I am not a business or a dealer. I simply sell stuff on the side that I do not need. I conduct all business with respect, and try to be professional. I appreciate the same. If something happens please offer a little grace and understanding and contact me about. As a small seller, I work hard to earn good feedback ratings.
| Gun Brand | Mossberg |
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
