MDT | ADJUSTABLE BUTTPAD | 107097-BLK
Put the Buttpad Where Your Shoulder Wants It.
A good shooting position should not depend on forcing your shoulder to meet a fixed buttpad. The MDT Vertical & Horizontal Adjustable Buttpad Base gives your XRS, ORYX, HNT26 or compatible MDT buttstock a movable contact point. Raise it, lower it or shift it sideways until the rifle settles against you the way you want.
An adjustable cheekpiece helps bring your eye behind the scope; this upgrade deals with the other end of the rifle. When the buttpad sits where it belongs, you can concentrate on your target instead of constantly readjusting the stock in your shoulder. That matters behind a rear bag, on a bipod and when moving between more upright and prone positions. This is a straightforward way to get more useful fit from a chassis you already own.
The base adds vertical and horizontal adjustment where the original fixed arrangement leaves little choice. MDT machines it from 6061-T6 aluminum, with a practical range of travel for making meaningful changes to the buttpad position. It also adds approximately 0.57 inch to length of pull, so it can become part of the overall fit of your rifle rather than an isolated add-on.
Built for the XRS, ORYX and Other MDT Stocks
The XRS is an especially natural match: you keep the stock-like handling you chose and gain another way to adjust your shoulder contact. MDT also specifies fitment for the ORYX chassis, HNT26 chassis, SRS-Lite, SCS-Lite buttstock and CCS buttstock. MDT additionally lists the SRS-X Lite buttstock used on the ACC Premier Gen2. The HNT26 is mechanically compatible, although this 0.4 lb component is not optimized for a minimum-weight hunting build.
Pair It With
On an XRS, fit and balance come together. The MDT 105330 weighted length-of-pull spacer is a separate way to adjust rear length and mass, while our Pete’s Pillars PPWM mini forend weights add six ounces at the front. If you prefer a larger front-end change, compare MDT’s dedicated one-pound XRS forend weight. These are choices for different balance goals, not a list of parts every rifle needs. The two front-weight options are XRS-specific.
MDT Weighted LOP SpacerRear balance and another length-of-pull adjustment option.
Pete’s Pillars PPWM Mini Weights6 oz per pair; made for the MDT XRS forend.
MDT XRS 1 lb Forend WeightA heavier XRS-specific option for front-end balance.MDT XRS CHASSIS
The XRS Across Different Rifle Platforms
Already running an XRS, or choosing one for your next rifle? These are distinct factory inlets for the same chassis family. Pick the inlet that matches your action, then use the 107097-BLK to dial in shoulder contact.
CZ 457XRS CZ 457 BlackTraditional stock feel with an aluminum chassis foundation.View Product →
TikkaXRS Tikka T3/T3x SA BlackA familiar Tikka platform with adjustable fit.View Product →
Remington 700XRS Remington 700 SA BlackShort-action XRS for a popular centerfire action.View Product →
SavageXRS Savage SA FDESavage short-action XRS with an FDE finish.View Product →
HowaXRS Howa 1500 SA BlackA dedicated Howa short-action inlet.View Product →
Tikka T1xXRS Tikka T1x BlackA rimfire XRS option for the T1x.View Product →More Compatible MDT Systems
This buttpad base is not limited to one XRS configuration. The ORYX and HNT26 chassis families, along with compatible MDT buttstocks, give it a much broader place in the catalog. On an HNT26, the added weight is the tradeoff; on an ORYX, it is another practical fit adjustment; and on the ACC Premier Gen2, confirm the installed SRS-X Lite buttstock before choosing it.
COMPATIBLE MDT FAMILIES
ORYX, HNT26 and MDT Buttstocks
Explore examples of compatible chassis and buttstocks. Compatibility is defined by the rear stock system, so check the exact product configuration rather than assuming every similarly named rifle chassis shares the same buttpad.
ORYXORYX CZ 457 ChassisDirect buttpad adjustment for the ORYX family.View Product →
ORYXORYX Ruger American SAA different action, the same compatible ORYX buttstock.View Product →
HNT26HNT26 Remington 700 SACompatible, with the added weight worth considering.View Product →
HNT26HNT26 Tikka T3 SAFor an HNT26 user prioritizing adjustability.View Product →
ACC Premier Gen2ACC Premier Gen2 Rem 700 SACompatible when equipped with the SRS-X Lite buttstock.View Product →
MDT ButtstockMDT SCS-Lite ButtstockAn independently listed compatible stock family.View Product →
MDT ButtstockMDT CCS Composite Carbine StockCompatible CCS stock with adjustable length of pull.View Product →
Key Features & Specifications
Manufacturer: MDT
Product: Vertical & Horizontal Adjustable Buttpad Base
MPN: 107097-BLK
Finish: Black
Construction: Precision-machined 6061-T6 aluminum
Vertical travel: 2 inches up, 0.67 inch down from neutral
Horizontal travel: 0.28 inch left or right; 0.55 inch total
Length of pull: Adds approximately 0.57 inch (14.5 mm)
Weight: Approximately 0.4 lb (0.18 kg)
Compatible families: XRS, ORYX, HNT26, SRS-Lite, SCS-Lite, CCS, and SRS-X Lite as specified by MDT
Small Change. Big Impact. Pete’s Pillars.
We stock MDT chassis and accessories and manufacture our own practical rifle upgrades in the USA. Fit the rifle to the way you shoot, then choose the components that genuinely improve your setup.
Frequently Asked Questions
Which MDT chassis and buttstocks accept the 107097-BLK?
MDT lists the XRS, ORYX and HNT26 chassis systems, plus SRS-Lite, SCS-Lite and CCS buttstocks. The manufacturer also lists the SRS-X Lite buttstock used on the ACC Premier Gen2. Fitment follows the buttstock design, not simply the rifle action.
What changes when I install the adjustable buttpad base?
You gain the ability to shift the buttpad vertically and from side to side instead of leaving the contact point fixed. That lets you place the pad where the rifle meets your shoulder most naturally.
How far can the buttpad move?
MDT specifies up to 2 inches upward and 0.67 inches downward from neutral, with 0.28 inches of adjustment to either side (0.55 inches total side-to-side travel).
Does the base change my length of pull?
Yes. The adjustment base adds approximately 0.57 inches (14.5 mm) to length of pull. Account for that additional length when setting up your stock.
Will it fit my XRS regardless of rifle platform?
The adjustment base is designed for the MDT XRS chassis system. We carry XRS versions for the CZ 457, Tikka T3/T3x, Remington 700 and other actions. Choose your chassis inlet separately; the buttpad fit follows the XRS buttstock.
Can I use it on an ORYX chassis?
Yes. MDT lists the ORYX chassis system as compatible, including ORYX stocks used across several rifle inlets. It is a buttstock adjustment accessory, not an ORYX-specific front-end component.
Is it suitable for MDT HNT26 hunting chassis?
MDT lists the HNT26 as compatible, but specifically notes that the base is not weight-optimized for that lightweight chassis. Its approximately 0.4 lb weight is an important consideration on a rifle built for minimum carry weight.
Will it work with an ACC Premier Gen2?
MDT lists compatibility with the SRS-X Lite buttstock used on the ACC Premier Gen2. Check the buttstock actually installed; this is not a blanket compatibility claim for every ACC buttstock or configuration.
What is the difference between this and the 105330 weighted LOP spacer?
This base changes buttpad height and side position. The MDT 105330 weighted LOP spacer serves a different role, adding rear weight and length of pull. They address different fit and balance preferences; verify any intended combined configuration.
What is it made from, and how much does it weigh?
MDT specifies 6061-T6 aluminum construction and an approximate weight of 0.4 lb (0.18 kg). This listing is the Black model, part number 107097-BLK.
Pete’s Pillars is an authorized MDT dealer.
Small Change. Big Impact. Pete’s Pillars.
MDT | ADJUSTABLE BUTTPAD | 107097-BLK
Put the Buttpad Where Your Shoulder Wants It.
A good shooting position should not depend on forcing your shoulder to meet a fixed buttpad. The MDT Vertical & Horizontal Adjustable Buttpad Base gives your XRS, ORYX, HNT26 or compatible MDT buttstock a movable contact point. Raise it, lower it or shift it sideways until the rifle settles against you the way you want.
An adjustable cheekpiece helps bring your eye behind the scope; this upgrade deals with the other end of the rifle. When the buttpad sits where it belongs, you can concentrate on your target instead of constantly readjusting the stock in your shoulder. That matters behind a rear bag, on a bipod and when moving between more upright and prone positions. This is a straightforward way to get more useful fit from a chassis you already own.
The base adds vertical and horizontal adjustment where the original fixed arrangement leaves little choice. MDT machines it from 6061-T6 aluminum, with a practical range of travel for making meaningful changes to the buttpad position. It also adds approximately 0.57 inch to length of pull, so it can become part of the overall fit of your rifle rather than an isolated add-on.
Built for the XRS, ORYX and Other MDT Stocks
The XRS is an especially natural match: you keep the stock-like handling you chose and gain another way to adjust your shoulder contact. MDT also specifies fitment for the ORYX chassis, HNT26 chassis, SRS-Lite, SCS-Lite buttstock and CCS buttstock. MDT additionally lists the SRS-X Lite buttstock used on the ACC Premier Gen2. The HNT26 is mechanically compatible, although this 0.4 lb component is not optimized for a minimum-weight hunting build.
Pair It With
On an XRS, fit and balance come together. The MDT 105330 weighted length-of-pull spacer is a separate way to adjust rear length and mass, while our Pete’s Pillars PPWM mini forend weights add six ounces at the front. If you prefer a larger front-end change, compare MDT’s dedicated one-pound XRS forend weight. These are choices for different balance goals, not a list of parts every rifle needs. The two front-weight options are XRS-specific.
MDT Weighted LOP SpacerRear balance and another length-of-pull adjustment option.Pete’s Pillars PPWM Mini Weights6 oz per pair; made for the MDT XRS forend.MDT XRS 1 lb Forend WeightA heavier XRS-specific option for front-end balance.MDT XRS CHASSIS
The XRS Across Different Rifle Platforms
Already running an XRS, or choosing one for your next rifle? These are distinct factory inlets for the same chassis family. Pick the inlet that matches your action, then use the 107097-BLK to dial in shoulder contact.
CZ 457XRS CZ 457 BlackTraditional stock feel with an aluminum chassis foundation.View Product →TikkaXRS Tikka T3/T3x SA BlackA familiar Tikka platform with adjustable fit.View Product →Remington 700XRS Remington 700 SA BlackShort-action XRS for a popular centerfire action.View Product →SavageXRS Savage SA FDESavage short-action XRS with an FDE finish.View Product →HowaXRS Howa 1500 SA BlackA dedicated Howa short-action inlet.View Product →Tikka T1xXRS Tikka T1x BlackA rimfire XRS option for the T1x.View Product →More Compatible MDT Systems
This buttpad base is not limited to one XRS configuration. The ORYX and HNT26 chassis families, along with compatible MDT buttstocks, give it a much broader place in the catalog. On an HNT26, the added weight is the tradeoff; on an ORYX, it is another practical fit adjustment; and on the ACC Premier Gen2, confirm the installed SRS-X Lite buttstock before choosing it.
COMPATIBLE MDT FAMILIES
ORYX, HNT26 and MDT Buttstocks
Explore examples of compatible chassis and buttstocks. Compatibility is defined by the rear stock system, so check the exact product configuration rather than assuming every similarly named rifle chassis shares the same buttpad.
ORYXORYX CZ 457 ChassisDirect buttpad adjustment for the ORYX family.View Product →ORYXORYX Ruger American SAA different action, the same compatible ORYX buttstock.View Product →HNT26HNT26 Remington 700 SACompatible, with the added weight worth considering.View Product →HNT26HNT26 Tikka T3 SAFor an HNT26 user prioritizing adjustability.View Product →ACC Premier Gen2ACC Premier Gen2 Rem 700 SACompatible when equipped with the SRS-X Lite buttstock.View Product →MDT ButtstockMDT SCS-Lite ButtstockAn independently listed compatible stock family.View Product →MDT ButtstockMDT CCS Composite Carbine StockCompatible CCS stock with adjustable length of pull.View Product →Key Features & Specifications
Manufacturer: MDT
Product: Vertical & Horizontal Adjustable Buttpad Base
MPN: 107097-BLK
Finish: Black
Construction: Precision-machined 6061-T6 aluminum
Vertical travel: 2 inches up, 0.67 inch down from neutral
Horizontal travel: 0.28 inch left or right; 0.55 inch total
Length of pull: Adds approximately 0.57 inch (14.5 mm)
Weight: Approximately 0.4 lb (0.18 kg)
Compatible families: XRS, ORYX, HNT26, SRS-Lite, SCS-Lite, CCS, and SRS-X Lite as specified by MDT
Small Change. Big Impact. Pete’s Pillars.
We stock MDT chassis and accessories and manufacture our own practical rifle upgrades in the USA. Fit the rifle to the way you shoot, then choose the components that genuinely improve your setup.
Frequently Asked Questions
Which MDT chassis and buttstocks accept the 107097-BLK?
MDT lists the XRS, ORYX and HNT26 chassis systems, plus SRS-Lite, SCS-Lite and CCS buttstocks. The manufacturer also lists the SRS-X Lite buttstock used on the ACC Premier Gen2. Fitment follows the buttstock design, not simply the rifle action.
What changes when I install the adjustable buttpad base?
You gain the ability to shift the buttpad vertically and from side to side instead of leaving the contact point fixed. That lets you place the pad where the rifle meets your shoulder most naturally.
How far can the buttpad move?
MDT specifies up to 2 inches upward and 0.67 inches downward from neutral, with 0.28 inches of adjustment to either side (0.55 inches total side-to-side travel).
Does the base change my length of pull?
Yes. The adjustment base adds approximately 0.57 inches (14.5 mm) to length of pull. Account for that additional length when setting up your stock.
Will it fit my XRS regardless of rifle platform?
The adjustment base is designed for the MDT XRS chassis system. We carry XRS versions for the CZ 457, Tikka T3/T3x, Remington 700 and other actions. Choose your chassis inlet separately; the buttpad fit follows the XRS buttstock.
Can I use it on an ORYX chassis?
Yes. MDT lists the ORYX chassis system as compatible, including ORYX stocks used across several rifle inlets. It is a buttstock adjustment accessory, not an ORYX-specific front-end component.
Is it suitable for MDT HNT26 hunting chassis?
MDT lists the HNT26 as compatible, but specifically notes that the base is not weight-optimized for that lightweight chassis. Its approximately 0.4 lb weight is an important consideration on a rifle built for minimum carry weight.
Will it work with an ACC Premier Gen2?
MDT lists compatibility with the SRS-X Lite buttstock used on the ACC Premier Gen2. Check the buttstock actually installed; this is not a blanket compatibility claim for every ACC buttstock or configuration.
What is the difference between this and the 105330 weighted LOP spacer?
This base changes buttpad height and side position. The MDT 105330 weighted LOP spacer serves a different role, adding rear weight and length of pull. They address different fit and balance preferences; verify any intended combined configuration.
What is it made from, and how much does it weigh?
MDT specifies 6061-T6 aluminum construction and an approximate weight of 0.4 lb (0.18 kg). This listing is the Black model, part number 107097-BLK.
Pete’s Pillars is an authorized MDT dealer.
Small Change. Big Impact. Pete’s Pillars.
| Brand | MDT |
| Type | Buttpad |
| For Gun Type | Rifle, Bolt Action |