MDT ACC ELITE & PREMIER GEN1 | ONE-PIECE INTERNAL WEIGHT | 106723-BLK
Add 2.5 Pounds Where You Need It. Keep the Forend Clean.
The MDT ACC One-Piece Internal Weight 106723-BLK adds 2.5 lb of steel mass inside the chassis forend without piling hardware onto the exterior. Built for MDT ACC Elite and ACC Premier Gen1, it helps shift the rifle's balance forward, settle it on a bag or barricade, and keep its movement more predictable through the shot.
A competition rifle needs enough weight in the right place, not just more weight everywhere. If the balance point sits too far back, the rifle can feel restless on a barricade or rear-heavy over a bag. Putting 2.5 lb inside the ACC forend moves mass forward and lowers the amount of correction needed to settle into position. That added mass can also reduce how much the rifle moves under recoil, making it easier to observe the impact and prepare for the next shot.
One Solid Weight. No Extra Bulk.
Instead of spreading multiple smaller pieces along the barrel channel, this weight uses a single piece of mild steel with a liquid-nitride finish. At 15.75 inches long and 1.5 inches wide, it occupies the internal space of the compatible ACC forend while leaving the rifle's outside profile clean. MDT offers it as the simple, substantial alternative to its five-piece ACC interior weight set. On the ACC Premier Gen1, the removable forend cap makes installation and removal straightforward.
Choose Fixed Mass or Fine-Tune the Balance.
The one-piece weight makes sense when you want a substantial, clean increase in forward mass. If you prefer to distribute weight in smaller increments, consider the MDT ACC five-piece interior weight set (104059-BLK), which is built for the ACC Elite and Premier Gen1 forends. You can also fine-tune the exterior of the rifle with our Pete's Pillars M-LOK forend weights or MDT M-LOK exterior weights. Those exterior options let you add or reposition mass as your barrel, optic and competition setup changes.
Our Take
Start Inside. Fine-Tune Outside.
The MDT one-piece bar adds serious internal mass without changing the outline of your forend. For more control over where the balance point lands, our USA-made M-LOK exterior weights add another 12.3 oz per pair wherever compatible slots are available. They're also useful as sacrificial contact surfaces when you're working around barricades.
See Our M-LOK Forend Weights →Pair It With
Pete's Pillars M-LOK Forend WeightsUSA-made steel weights, 12.3 oz per pair
MDT M-LOK Exterior Weights0.70 lb per pair; repositionable M-LOK mountingWEIGHT AND BALANCE
Dial In Your ACC Forend
Use the one-piece internal bar for substantial mass, or choose repositionable exterior weights.
Pete's PillarsPete's Pillars M-LOK Forend WeightsUSA-made steel weights, 12.3 oz per pairShop Now →
MDTMDT M-LOK Exterior Weights0.70 lb per pair; repositionable M-LOK mountingShop Now →
MDTMDT ACC Interior Weights — 5-PackAdjustable interior weight placement for ACC Elite / Premier Gen1Shop Now →Pete's PillarsPete's Pillars M-LOK Forend WeightsUSA-made steel weights, 12.3 oz per pairShop Now →MDTMDT M-LOK Exterior Weights0.70 lb per pair; repositionable M-LOK mountingShop Now →Looking for weights for ACC Premier Gen2?
The Gen2 uses a different internal-weight setup. See the MDT ACC Premier Gen2 four-piece interior weights or the Gen2 forend tip weight for targeted forward balance.
FOR ACC PREMIER GEN2
Weight Options for the Newer Forend
Choose the dedicated Gen2 interior set or add a little weight at the forend tip.
MDTMDT ACC Premier Gen2 Interior WeightsFour-piece set built for the Gen2 forendShop Now →
MDTMDT ACC Premier Gen2 Tip Weight4.32 oz right at the end of the Gen2 forendShop Now →Pete's PillarsPete's Pillars M-LOK Forend WeightsUSA-made steel weights, 12.3 oz per pairShop Now →MDTMDT M-LOK Exterior Weights0.70 lb per pair; repositionable M-LOK mountingShop Now →
Fine-Tune the Balance
Put Additional Mass Exactly Where It Works.
- 12.3 oz of USA-made steel weights per pair
- M-LOK mounting for positioning along compatible forends
- Extra protection when your rifle contacts bags and barricades
Want the original modular interior option? Find the MDT five-piece ACC weight set.
Did You Know?
Balance Is a System, Not a Single Number.
We carry interior, exterior and tip-weight options for different ACC generations.
ACC Elite / Gen1
ACC Premier Gen2
Pete's Pillars
Product Specifications
Manufacturer: MDT
MPN: 106723-BLK
Product: ACC One-Piece Internal Weight
Weight: 2.5 lb
Dimensions: 15.75" × 1.5"
Material: Mild steel
Finish: Liquid nitride, black
Fitment: MDT ACC Elite and ACC Premier Gen1 chassis
Purpose: Internal forward weight for balance tuning and recoil management
Frequently Asked Questions
Fitment, mass, installation and other ACC weight choices.
Which ACC chassis does this weight fit?
The 106723-BLK one-piece internal weight is designed for the MDT ACC Elite and ACC Premier Gen1 forends. If you have an ACC Premier Gen2, see the four-piece Gen2 interior weights instead.
Does it weigh 2.25 lb or 2.5 lb?
MDT specifies 2.5 lb for the 106723-BLK one-piece internal weight.
Why choose one piece instead of smaller interior weights?
The one-piece design adds substantial forward mass in a single component. The five-piece MDT ACC interior set is the better option when you want to change the amount and location of internal weight in smaller increments.
Can I add exterior forend weights too?
Yes, if your chassis has available, compatible M-LOK mounting space. Our Pete's Pillars forend weights and MDT exterior weights let you tune the balance farther forward or distribute mass along the forend.
What weight options are available for ACC Premier Gen2?
For the Gen2 forend, consider 110007-BLK interior weights and the 110002-BLK forend tip weight. Both are linked directly to their product pages.
Small Change. Big Impact. Pete's Pillars.
MDT ACC ELITE & PREMIER GEN1 | ONE-PIECE INTERNAL WEIGHT | 106723-BLK
Add 2.5 Pounds Where You Need It. Keep the Forend Clean.
The MDT ACC One-Piece Internal Weight 106723-BLK adds 2.5 lb of steel mass inside the chassis forend without piling hardware onto the exterior. Built for MDT ACC Elite and ACC Premier Gen1, it helps shift the rifle's balance forward, settle it on a bag or barricade, and keep its movement more predictable through the shot.
A competition rifle needs enough weight in the right place, not just more weight everywhere. If the balance point sits too far back, the rifle can feel restless on a barricade or rear-heavy over a bag. Putting 2.5 lb inside the ACC forend moves mass forward and lowers the amount of correction needed to settle into position. That added mass can also reduce how much the rifle moves under recoil, making it easier to observe the impact and prepare for the next shot.
One Solid Weight. No Extra Bulk.
Instead of spreading multiple smaller pieces along the barrel channel, this weight uses a single piece of mild steel with a liquid-nitride finish. At 15.75 inches long and 1.5 inches wide, it occupies the internal space of the compatible ACC forend while leaving the rifle's outside profile clean. MDT offers it as the simple, substantial alternative to its five-piece ACC interior weight set. On the ACC Premier Gen1, the removable forend cap makes installation and removal straightforward.
Choose Fixed Mass or Fine-Tune the Balance.
The one-piece weight makes sense when you want a substantial, clean increase in forward mass. If you prefer to distribute weight in smaller increments, consider the MDT ACC five-piece interior weight set (104059-BLK), which is built for the ACC Elite and Premier Gen1 forends. You can also fine-tune the exterior of the rifle with our Pete's Pillars M-LOK forend weights or MDT M-LOK exterior weights. Those exterior options let you add or reposition mass as your barrel, optic and competition setup changes.
Our Take
Start Inside. Fine-Tune Outside.
The MDT one-piece bar adds serious internal mass without changing the outline of your forend. For more control over where the balance point lands, our USA-made M-LOK exterior weights add another 12.3 oz per pair wherever compatible slots are available. They're also useful as sacrificial contact surfaces when you're working around barricades.
See Our M-LOK Forend Weights →Pair It With
Pete's Pillars M-LOK Forend WeightsUSA-made steel weights, 12.3 oz per pairMDT M-LOK Exterior Weights0.70 lb per pair; repositionable M-LOK mountingWEIGHT AND BALANCE
Dial In Your ACC Forend
Use the one-piece internal bar for substantial mass, or choose repositionable exterior weights.
Pete's PillarsPete's Pillars M-LOK Forend WeightsUSA-made steel weights, 12.3 oz per pairShop Now →MDTMDT M-LOK Exterior Weights0.70 lb per pair; repositionable M-LOK mountingShop Now →MDTMDT ACC Interior Weights — 5-PackAdjustable interior weight placement for ACC Elite / Premier Gen1Shop Now →Pete's PillarsPete's Pillars M-LOK Forend WeightsUSA-made steel weights, 12.3 oz per pairShop Now →MDTMDT M-LOK Exterior Weights0.70 lb per pair; repositionable M-LOK mountingShop Now →Looking for weights for ACC Premier Gen2?
The Gen2 uses a different internal-weight setup. See the MDT ACC Premier Gen2 four-piece interior weights or the Gen2 forend tip weight for targeted forward balance.
FOR ACC PREMIER GEN2
Weight Options for the Newer Forend
Choose the dedicated Gen2 interior set or add a little weight at the forend tip.
MDTMDT ACC Premier Gen2 Interior WeightsFour-piece set built for the Gen2 forendShop Now →MDTMDT ACC Premier Gen2 Tip Weight4.32 oz right at the end of the Gen2 forendShop Now →Pete's PillarsPete's Pillars M-LOK Forend WeightsUSA-made steel weights, 12.3 oz per pairShop Now →MDTMDT M-LOK Exterior Weights0.70 lb per pair; repositionable M-LOK mountingShop Now →Fine-Tune the Balance
Put Additional Mass Exactly Where It Works.
- 12.3 oz of USA-made steel weights per pair
- M-LOK mounting for positioning along compatible forends
- Extra protection when your rifle contacts bags and barricades
Want the original modular interior option? Find the MDT five-piece ACC weight set.
Did You Know?
Balance Is a System, Not a Single Number.
We carry interior, exterior and tip-weight options for different ACC generations.
ACC Elite / Gen1
ACC Premier Gen2
Pete's Pillars
Product Specifications
Manufacturer: MDT
MPN: 106723-BLK
Product: ACC One-Piece Internal Weight
Weight: 2.5 lb
Dimensions: 15.75" × 1.5"
Material: Mild steel
Finish: Liquid nitride, black
Fitment: MDT ACC Elite and ACC Premier Gen1 chassis
Purpose: Internal forward weight for balance tuning and recoil management
Frequently Asked Questions
Fitment, mass, installation and other ACC weight choices.
Which ACC chassis does this weight fit?
The 106723-BLK one-piece internal weight is designed for the MDT ACC Elite and ACC Premier Gen1 forends. If you have an ACC Premier Gen2, see the four-piece Gen2 interior weights instead.
Does it weigh 2.25 lb or 2.5 lb?
MDT specifies 2.5 lb for the 106723-BLK one-piece internal weight.
Why choose one piece instead of smaller interior weights?
The one-piece design adds substantial forward mass in a single component. The five-piece MDT ACC interior set is the better option when you want to change the amount and location of internal weight in smaller increments.
Can I add exterior forend weights too?
Yes, if your chassis has available, compatible M-LOK mounting space. Our Pete's Pillars forend weights and MDT exterior weights let you tune the balance farther forward or distribute mass along the forend.
What weight options are available for ACC Premier Gen2?
For the Gen2 forend, consider 110007-BLK interior weights and the 110002-BLK forend tip weight. Both are linked directly to their product pages.
Small Change. Big Impact. Pete's Pillars.
| Brand | MDT |