MDT ACC Elite Remington 700 Short Action Chassis – Black
The MDT ACC Elite 106557-BLK is MDT's flagship competition chassis for the Remington 700 Short Action.
Built for shooters who want absolute confidence in their equipment when the pressure is on, the ACC Elite delivers the rigidity, balance control, adjustability, and accessory support demanded by serious PRS, long-range, and positional shooting.
This is MDT's top-tier competition platform. Rather than simply replacing the factory stock, the ACC Elite gives the shooter extensive control over rifle balance, support position, trigger-hand placement, and overall fit.
At the end of the day, you know your gear isn't what is holding you back.
Shop Remington 700 Parts & Upgrades
for additional components to complete your precision rifle build.
Built for Podium-Level Competition
The ACC Elite was developed around the demands of serious competition shooters. Its design focuses on stability, recoil control, weight management, and consistent interaction between the shooter and rifle.
A stiff aluminum chassis structure helps resist unwanted flex as the rifle is loaded into barricades, bags, tripods, and other support positions.
The result is a rifle that can settle naturally into position, track predictably through recoil, and remain consistent as the shooter transitions through a stage.
19" ACC Elite Competition Forend
The ACC Elite uses a long, wide, and exceptionally rigid 19-inch competition forend designed around positional and long-range shooting.
- Full-length integrated ARCA interface
- M-LOK accessory mounting
- Internal and external weight compatibility
- Wide, stable competition-oriented profile
- Included custom-cut grip tape for additional traction on bags and barricades
- Drilled and tapped for compatible MDT Control Bridge and Night Vision Hood systems
- Compatible with Baker Wings and additional balance-tuning components
The full-length ARCA interface creates a continuous mounting surface for bipods, tripods, barricade stops, and other ARCA-compatible support equipment.
That flexibility allows support equipment to be positioned around the stage and shooting position instead of forcing the shooter to work around a single fixed mounting point.
Precision Balance Tuning
One of the defining advantages of the ACC Elite is the ability to control exactly where weight is placed on the rifle.
Compatible MDT internal and external weights allow the center of gravity to be tuned around the barrel, optic, bipod, and other equipment installed on the build.
The goal is not simply to make the rifle heavier. It is to place mass where it helps the rifle settle naturally on a bag, remain level on a barricade, and track predictably through recoil.
That adjustability also allows the chassis to evolve with the rifle as barrels, optics, support equipment, and competition requirements change.
Elite-Level Rigidity
Competition rifles are routinely loaded against barricades and other supports from less-than-perfect positions. Unwanted chassis flex can make those positions less predictable.
The ACC Elite uses a reinforced aluminum structure designed to maintain rigidity through the center section and forend, providing the barreled action with a stable foundation even when significant pressure is being applied to the rifle.
It is this combination of rigidity and tunable balance that separates the ACC Elite from more general-purpose chassis systems.
SRS-X Elite Buttstock
The included MDT SRS-X Elite buttstock provides extensive adjustment so the rear of the rifle can be fitted around the shooter rather than forcing the shooter to adapt to a fixed stock.
- Adjustable cheek riser
- Front and rear cheekpiece adjustment
- Adjustable length of pull
- Adjustable buttpad position
- Approximately 12.25" to 14.75" length-of-pull range
Proper stock adjustment helps establish repeatable eye alignment behind the optic and consistent shoulder placement as the shooter moves between prone, barricade, bag-supported, and unconventional positions.
Vertical Grip Elite
The included MDT Vertical Grip Elite with connector bar gives the shooter additional control over trigger-hand placement.
The grip can be adjusted to create a more natural wrist angle and cleaner trigger-finger position, while the ACC Elite thumb-rest system provides another repeatable contact point for the firing hand.
Together, these adjustments allow the chassis to be fitted around the shooter instead of forcing the shooter into one predetermined grip position.
Barricade & Bag Performance
The ACC Elite is built around the realities of positional competition, where a rifle may move from prone to bags, barricades, rooftops, tank traps, and other improvised supports over the course of a single stage.
Its wide front section provides a stable interface on bags and barricades, while the included grip tape helps the chassis stay planted on support surfaces.
Combined with the long ARCA interface and extensive weight tuning, the chassis can be configured to settle naturally instead of requiring constant correction from the shooter.
What Sets the ACC Elite Apart
The ACC Elite sits at the top of MDT's competition chassis lineup and is engineered as a complete system rather than simply an accessory-ready chassis.
Compared with the ACC Premier Gen2, the Elite uses a longer, wider, and more competition-focused front section along with the SRS-X Elite buttstock, Vertical Grip Elite, expanded balance tuning, and additional structural reinforcement.
The ACC Premier Gen2 is an excellent choice for shooters looking for competition capability with broader versatility. The ACC Elite is built for the shooter whose priority is extracting the maximum possible stability, control, and configurability from a dedicated precision rifle.
Remington 700 Short Action Fitment
The 106557-BLK is configured for compatible right-hand Remington 700 Short Action rifles and compatible 700-pattern actions.
- Platform: Remington 700 Pattern
- Action: Short Action
- Hand: Right Hand
- Color: Black
- Magazine System: AICS Pattern
- Forend Length: Approximately 19"
- Bottom Interface: Full-Length Integrated ARCA
- Accessory Interface: M-LOK
- Maximum Barrel Diameter: Approximately 1.35"
Build Out Your ACC Elite
The Pete's Pillars Difference
Pete's Pillars is an authorized MDT dealer with years of experience supporting precision-rifle and competition builds.
We stock MDT chassis systems, magazines, balance components, support equipment, and complementary upgrades so the rifle can be approached as a complete system rather than a collection of unrelated parts.
For a serious Remington 700 competition build, the ACC Elite represents the flagship of MDT's chassis lineup.
Product Details
- Manufacturer: MDT
- Product Line: ACC Elite
- Part Number: 106557-BLK
- Platform: Remington 700 Pattern
- Action: Short Action
- Hand: Right Hand
- Color: Black
- Material: Aircraft-Grade 6061 Aluminum
- Forend: Approximately 19"
- ARCA: Full-Length Integrated
- Accessory Mounting: M-LOK
- Magazine Compatibility: AICS Pattern
- Maximum Barrel Diameter: Approximately 1.35"
- Length of Pull: Approximately 12.25"–14.75"
- Approximate Chassis Weight: 6.10 lbs, configuration dependent
- Buttstock: MDT SRS-X Elite
- Grip: MDT Vertical Grip Elite with Connector Bar
Accessories and weights sold separately unless specifically stated otherwise.
Pete's Pillars is an authorized MDT dealer.
