CZ 457 Profiled Aluminum Pillar Set DIY Stock Pillar Bedding SLIM LINE
** PETE'S PILLARS**
The perfect choice for premium pillars
These are pillars only. I have other kits that include upgraded high grade actions screw and threaded rod to assist with cutting pillar length.
These are SLIM LINE pillars for a CZ 457, American, Lux, Tacticool Stock, MTR.
Pillar installation assists in accuracy as it prevents crushing of the stock and prevent stress cracks. Pillars also keep the action from twisting or moving. Consistency is key in accuracy.
These are just the pillars, they are 7/16 (.4370) in diameter, CNC machined, and made of 6061 aluminum. These pillars are left
long so that they can be trimmed to length by the installer, depending on the specific stock that you have. If the pillars are cut too short they will not do their job.
This a DIY kit. In order to utilize this kit you must drill out the stock, and "glue" these into place. Final fit and finish will need to be done during installation. A chamfer may be required on the bottom inner diameter of the pillars to allow for action screw fitment. A drill press is recommended. Simply scuff up the exterior with some sand paper prior to installation and be sure to degrease.
The pillars have a thinner wall for narrow sporting stocks. For bench rest stocks, I suggest the standard pillars that are 1/2 in diameter.
These will only fit the CZ 457 because of the notch for the magazine well. And the reccessed rear pillar I have other pillars that will fit other actions such as the Remington 700
Please ask any and all questions before buying. I am not a business or a dealer. I simply sell stuff on the side that I do not need. I conduct all business with respect, and try to be professional. I appreciate the same. If something happens please offer a little grace and understanding and contact me about. As a small seller, I work hard to earn good feedback ratings.