- Rifle/ Pistol Parts
- >
- Parts by Manufacturer
- >
- DIP (DiProducts)
- >
- DIP DiProducts Savage B17 B22 Series 5 MOA Scope Rail Mount Base SAV13036
DIP DiProducts Savage B17 B22 Series 5 MOA Scope Rail Mount Base SAV13036
DIP DiProducts Savage B17 B22 Series Scope Rail Mount Base SAV 13036
Savage B17/B22 Magnum
5 Moa
The Picatinny scope mount designed for the Savage B17 & B22 series rimfire rifles with factory drilled receivers. Works great when using Picatinny and Weaver style rings on those really long, large objective high powered scopes. Made from billet aircraft aluminum and then black hard coat anodized for a long lasting finish. The ejection port area is "cut-out" for easier, cleaning, single shot loading or clearing a stuck spent case. Uses 4 (1)TORX head #15 screws - included.
(1)The NEW factory textured finish(paint) on some models is bleeding into the factory drilled & taped holes causing problems installing the screws. You might need the clean the holes by hand with a 6-48 tap!
Will not fit the Rascal
*Note: "Savage" Ejection port laser engraving may or may not appear in all mounts.
Recommended Tools:
Inch pound torque wrench
#15 TORX driver
5MOA built in to the mount to allow most scopes to be "zeroed" anywhere from 25-150yrds using 22LR target or subsonic ammunition
Height - approxmately .34"
Weight - 2oz
Large Ejection port opening allows easy access for single shot loading, feed or ejection/chambering problem