DIP DiProducts CZ 452 453 455 3/8 Dovetail Picatinny Ext Scope Mount CZ19019LH
DIP DiProducts CZ 452 453 455 3/8" Dovetail to Picatinny Scope Rail Base Mount CZ19019LH
Produced from high quality 6061 aircraft aluminum on computer controlled milling machines right here in the US. Mil spec hard anodized for a long lasting finish. Slides onto the 455 dovetail and easily attaches with the six(6) supplied set screws that, unlike a 4 screw system, allows you to level the rail BEFORE you install your optics. No drilling or tapping required. Accepts Picatinny and Weaver style rings..
Convert the stock dovetail to a standard Picatinny scope mount with so you can use just about any Weaver or Picatinny style ring. Great for quick release rings so you can easily swap optics between rifles.
Easily attaches with the 6 supplied set screws(see photo) to hold the mount firmly to the receivers dovetail. No drilling or tapping required for installation.
ALL 452/453 models with a 3/8 mm dovetail.
Adds approximately .230" to the receiver height
Please see the chart or measure the top of your dovetail.
If you are NOT sure about the dovetail size of your CZ, measure the widest part(top):
.500 = 3/8
.430 = 11m
Ejection Port Laser engraving(Ceska Zbrojovka) may not be included per DIP Inc
Purple LocTite (#222)
Directions are available for install online and via video.
This part goes excellent with our Pete's High qulity stainless steel block pin and Magazine Well screws