DIP DiProducts CZ 452 453 455 Dovetail Picatinny 25 MOA Scope Mount CZ19023LH
DIP DiProducts CZ 452 453 455 Left Hand Extended 3/8 Dovetail to Picatinny Scope Rail 25 MOA Mount CZ 19023LH
This image shows a right hand rail, due to factory images but it is a Left Hand rail.
Produced from high quality 6061 aircraft aluminum on computer controlled milling machines right here in the US. Mil spec hard anodized for a long lasting finish. Slides onto the 455 dovetail and easily attaches with the six(6) supplied set screws that, unlike a 4 screw system, allows you to level the rail BEFORE you install your optics. No drilling or tapping required. Accepts Picatinny and Weaver style rings..
Convert the CZ American dovetail to a standard Picatinny scope mount with 25 MOA built into the rail. Adds the extra elevation so you can set your scope "zero" at 200yrds and beyond for those long shots. Great for any Weaver or Picatinny style rings and quick release rings so you can easily swap optics between rifles. 6 supplied set screws hold the mount firmly to the receivers dovetail. No drilling or tapping required for installation.
If you are NOT sure about the dovetail size of your CZ, measure the widest part(top):
.500 = 3/8
.430 = 11mm
Ejection Port Laser engraving(Ceska Zbrojovka) may not be included per DIP Inc
Purple LocTite (#222)
Directions are available for install online and via video.
This part goes excellent with our Pete's High qulity stainless steel block pin and Magazine Well screws.