- Rifle/ Pistol Parts
- Parts by Manufacturer
- DIP (DiProducts)
- DIP DiProducts Savage MKI MKII 93/93R Series Scope Rail Mount Base SAV 13010
DIP DiProducts Savage MKI MKII 93/93R Series Scope Rail Mount Base SAV 13010
DIP DiProducts Savage MKI MKII 93/93R Series Scope Rail Mount Base SAV13010
The Picatinny scope mount designed for the Savage MKI, MKII & 93/93R series rimfire rifles with factory drilled & tapped "E" and non "E" receivers. Works great when using Picatinny and Weaver style rings on those really long, large objective high powered scopes. Made from billet aircraft aluminum and then black hard coat anodized for a long lasting finish. The *ejection port area is "cut-out" for easier, cleaning, single shot loading or clearing a stuck spent case. Uses 4 (1)TORX head #15 screws - included.
Large ejection port opening allows easy access for single shot loading and removal of cartages if feed or ejection/chambering problems occur.
(1)The factory textured finish(paint) on some models is bleeding into the factory drilled & taped holes causing problems installing the screws. You might need the clean the holes by hand with a 6-48 tap!
Will not fit the Rascal
*Note: "Savage" Ejection port laser engraving may or may not appear in all mounts.
Height - approxmately .31"
Produced from high quality 6061 aircraft aluminum on computer controlled milling machines right here in the US. Mil spec hard anodized for a long lasting finish.
Ejection Port Laser engraving may not be included per DIP Availability.